1065 lines
46 KiB
C
1065 lines
46 KiB
C
/** @file mdb.h
|
|
* @brief memory-mapped database library
|
|
*
|
|
* @mainpage MDB Memory-Mapped Database Manager
|
|
* MDB is a Btree-based database management library modeled loosely on the
|
|
* BerkeleyDB API, but much simplified. The entire database is exposed
|
|
* in a memory map, and all data fetches return data directly
|
|
* from the mapped memory, so no malloc's or memcpy's occur during
|
|
* data fetches. As such, the library is extremely simple because it
|
|
* requires no page caching layer of its own, and it is extremely high
|
|
* performance and memory-efficient. It is also fully transactional with
|
|
* full ACID semantics, and when the memory map is read-only, the
|
|
* database integrity cannot be corrupted by stray pointer writes from
|
|
* application code.
|
|
*
|
|
* The library is fully thread-aware and supports concurrent read/write
|
|
* access from multiple processes and threads. Data pages use a copy-on-
|
|
* write strategy so no active data pages are ever overwritten, which
|
|
* also provides resistance to corruption and eliminates the need of any
|
|
* special recovery procedures after a system crash. Writes are fully
|
|
* serialized; only one write transaction may be active at a time, which
|
|
* guarantees that writers can never deadlock. The database structure is
|
|
* multi-versioned so readers run with no locks; writers cannot block
|
|
* readers, and readers don't block writers.
|
|
*
|
|
* Unlike other well-known database mechanisms which use either write-ahead
|
|
* transaction logs or append-only data writes, MDB requires no maintenance
|
|
* during operation. Both write-ahead loggers and append-only databases
|
|
* require periodic checkpointing and/or compaction of their log or database
|
|
* files otherwise they grow without bound. MDB tracks free pages within
|
|
* the database and re-uses them for new write operations, so the database
|
|
* size does not grow without bound in normal use.
|
|
*
|
|
* The memory map can be used as a read-only or read-write map. It is
|
|
* read-only by default as this provides total immunity to corruption.
|
|
* Using read-write mode offers much higher write performance, but adds
|
|
* the possibility for stray application writes thru pointers to silently
|
|
* corrupt the database. Of course if your application code is known to
|
|
* be bug-free (...) then this is not an issue.
|
|
*
|
|
* @author Howard Chu, Symas Corporation.
|
|
*
|
|
* @copyright Copyright 2011-2012 Howard Chu, Symas Corp. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted only as authorized by the OpenLDAP
|
|
* Public License.
|
|
*
|
|
* A copy of this license is available in the file LICENSE in the
|
|
* top-level directory of the distribution or, alternatively, at
|
|
* <http://www.OpenLDAP.org/license.html>.
|
|
*
|
|
* @par Derived From:
|
|
* This code is derived from btree.c written by Martin Hedenfalk.
|
|
*
|
|
* Copyright (c) 2009, 2010 Martin Hedenfalk <martin@bzero.se>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
#ifndef _MDB_H_
|
|
#define _MDB_H_
|
|
|
|
#include <sys/types.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** @defgroup public Public API
|
|
* @{
|
|
*/
|
|
/** @defgroup Version Version Macros
|
|
* @{
|
|
*/
|
|
/** Library major version */
|
|
#define MDB_VERSION_MAJOR 0
|
|
/** Library minor version */
|
|
#define MDB_VERSION_MINOR 9
|
|
/** Library patch version */
|
|
#define MDB_VERSION_PATCH 4
|
|
|
|
/** Combine args a,b,c into a single integer for easy version comparisons */
|
|
#define MDB_VERINT(a,b,c) (((a) << 24) | ((b) << 16) | (c))
|
|
|
|
/** The full library version as a single integer */
|
|
#define MDB_VERSION_FULL \
|
|
MDB_VERINT(MDB_VERSION_MAJOR,MDB_VERSION_MINOR,MDB_VERSION_PATCH)
|
|
|
|
/** The release date of this library version */
|
|
#define MDB_VERSION_DATE "September 14, 2012"
|
|
|
|
/** A stringifier for the version info */
|
|
#define MDB_VERSTR(a,b,c,d) "MDB " #a "." #b "." #c ": (" d ")"
|
|
|
|
/** A helper for the stringifier macro */
|
|
#define MDB_VERFOO(a,b,c,d) MDB_VERSTR(a,b,c,d)
|
|
|
|
/** The full library version as a C string */
|
|
#define MDB_VERSION_STRING \
|
|
MDB_VERFOO(MDB_VERSION_MAJOR,MDB_VERSION_MINOR,MDB_VERSION_PATCH,MDB_VERSION_DATE)
|
|
/** @} */
|
|
|
|
/** @brief Opaque structure for a database environment.
|
|
*
|
|
* A DB environment supports multiple databases, all residing in the same
|
|
* shared-memory map.
|
|
*/
|
|
typedef struct MDB_env MDB_env;
|
|
|
|
/** @brief Opaque structure for a transaction handle.
|
|
*
|
|
* All database operations require a transaction handle. Transactions may be
|
|
* read-only or read-write.
|
|
*/
|
|
typedef struct MDB_txn MDB_txn;
|
|
|
|
/** @brief A handle for an individual database in the DB environment. */
|
|
typedef unsigned int MDB_dbi;
|
|
|
|
/** @brief Opaque structure for navigating through a database */
|
|
typedef struct MDB_cursor MDB_cursor;
|
|
|
|
/** @brief Generic structure used for passing keys and data in and out of the database. */
|
|
typedef struct MDB_val {
|
|
size_t mv_size; /**< size of the data item */
|
|
void *mv_data; /**< address of the data item */
|
|
} MDB_val;
|
|
|
|
/** @brief A callback function used to compare two keys in a database */
|
|
typedef int (MDB_cmp_func)(const MDB_val *a, const MDB_val *b);
|
|
|
|
/** @brief A callback function used to relocate a position-dependent data item
|
|
* in a fixed-address database.
|
|
*
|
|
* The \b newptr gives the item's desired address in
|
|
* the memory map, and \b oldptr gives its previous address. The item's actual
|
|
* data resides at the address in \b item. This callback is expected to walk
|
|
* through the fields of the record in \b item and modify any
|
|
* values based at the \b oldptr address to be relative to the \b newptr address.
|
|
* @param[in,out] item The item that is to be relocated.
|
|
* @param[in] oldptr The previous address.
|
|
* @param[in] newptr The new address to relocate to.
|
|
* @param[in] relctx An application-provided context, set by #mdb_set_relctx().
|
|
* @todo This feature is currently unimplemented.
|
|
*/
|
|
typedef void (MDB_rel_func)(MDB_val *item, void *oldptr, void *newptr, void *relctx);
|
|
|
|
/** @defgroup mdb_env Environment Flags
|
|
* @{
|
|
*/
|
|
/** mmap at a fixed address */
|
|
#define MDB_FIXEDMAP 0x01
|
|
/** no environment directory */
|
|
#define MDB_NOSUBDIR 0x02
|
|
/** don't fsync after commit */
|
|
#define MDB_NOSYNC 0x10000
|
|
/** read only */
|
|
#define MDB_RDONLY 0x20000
|
|
/** don't fsync metapage after commit */
|
|
#define MDB_NOMETASYNC 0x40000
|
|
/** use writable mmap */
|
|
#define MDB_WRITEMAP 0x80000
|
|
/** use asynchronous msync */
|
|
#define MDB_MAPASYNC 0x100000
|
|
/** @} */
|
|
|
|
/** @defgroup mdb_open Database Flags
|
|
* @{
|
|
*/
|
|
/** use reverse string keys */
|
|
#define MDB_REVERSEKEY 0x02
|
|
/** use sorted duplicates */
|
|
#define MDB_DUPSORT 0x04
|
|
/** numeric keys in native byte order.
|
|
* The keys must all be of the same size. */
|
|
#define MDB_INTEGERKEY 0x08
|
|
/** with #MDB_DUPSORT, sorted dup items have fixed size */
|
|
#define MDB_DUPFIXED 0x10
|
|
/** with #MDB_DUPSORT, dups are numeric in native byte order */
|
|
#define MDB_INTEGERDUP 0x20
|
|
/** with #MDB_DUPSORT, use reverse string dups */
|
|
#define MDB_REVERSEDUP 0x40
|
|
/** create DB if not already existing */
|
|
#define MDB_CREATE 0x40000
|
|
/** @} */
|
|
|
|
/** @defgroup mdb_put Write Flags
|
|
* @{
|
|
*/
|
|
/** For put: Don't write if the key already exists. */
|
|
#define MDB_NOOVERWRITE 0x10
|
|
/** Only for #MDB_DUPSORT<br>
|
|
* For put: don't write if the key and data pair already exist.<br>
|
|
* For mdb_cursor_del: remove all duplicate data items.
|
|
*/
|
|
#define MDB_NODUPDATA 0x20
|
|
/** For mdb_cursor_put: overwrite the current key/data pair */
|
|
#define MDB_CURRENT 0x40
|
|
/** For put: Just reserve space for data, don't copy it. Return a
|
|
* pointer to the reserved space.
|
|
*/
|
|
#define MDB_RESERVE 0x10000
|
|
/** Data is being appended, don't split full pages. */
|
|
#define MDB_APPEND 0x20000
|
|
/** Duplicate data is being appended, don't split full pages. */
|
|
#define MDB_APPENDDUP 0x40000
|
|
/** Store multiple data items in one call. */
|
|
#define MDB_MULTIPLE 0x80000
|
|
/* @} */
|
|
|
|
/** @brief Cursor Get operations.
|
|
*
|
|
* This is the set of all operations for retrieving data
|
|
* using a cursor.
|
|
*/
|
|
typedef enum MDB_cursor_op {
|
|
MDB_FIRST, /**< Position at first key/data item */
|
|
MDB_FIRST_DUP, /**< Position at first data item of current key.
|
|
Only for #MDB_DUPSORT */
|
|
MDB_GET_BOTH, /**< Position at key/data pair. Only for #MDB_DUPSORT */
|
|
MDB_GET_BOTH_RANGE, /**< position at key, nearest data. Only for #MDB_DUPSORT */
|
|
MDB_GET_CURRENT, /**< Return key/data at current cursor position */
|
|
MDB_GET_MULTIPLE, /**< Return all the duplicate data items at the current
|
|
cursor position. Only for #MDB_DUPFIXED */
|
|
MDB_LAST, /**< Position at last key/data item */
|
|
MDB_LAST_DUP, /**< Position at last data item of current key.
|
|
Only for #MDB_DUPSORT */
|
|
MDB_NEXT, /**< Position at next data item */
|
|
MDB_NEXT_DUP, /**< Position at next data item of current key.
|
|
Only for #MDB_DUPSORT */
|
|
MDB_NEXT_MULTIPLE, /**< Return all duplicate data items at the next
|
|
cursor position. Only for #MDB_DUPFIXED */
|
|
MDB_NEXT_NODUP, /**< Position at first data item of next key.
|
|
Only for #MDB_DUPSORT */
|
|
MDB_PREV, /**< Position at previous data item */
|
|
MDB_PREV_DUP, /**< Position at previous data item of current key.
|
|
Only for #MDB_DUPSORT */
|
|
MDB_PREV_NODUP, /**< Position at last data item of previous key.
|
|
Only for #MDB_DUPSORT */
|
|
MDB_SET, /**< Position at specified key */
|
|
MDB_SET_KEY, /**< Position at specified key, return key + data */
|
|
MDB_SET_RANGE /**< Position at first key greater than or equal to specified key. */
|
|
} MDB_cursor_op;
|
|
|
|
/** @defgroup errors Return Codes
|
|
*
|
|
* BerkeleyDB uses -30800 to -30999, we'll go under them
|
|
* @{
|
|
*/
|
|
/** Successful result */
|
|
#define MDB_SUCCESS 0
|
|
/** key/data pair already exists */
|
|
#define MDB_KEYEXIST (-30799)
|
|
/** key/data pair not found (EOF) */
|
|
#define MDB_NOTFOUND (-30798)
|
|
/** Requested page not found - this usually indicates corruption */
|
|
#define MDB_PAGE_NOTFOUND (-30797)
|
|
/** Located page was wrong type */
|
|
#define MDB_CORRUPTED (-30796)
|
|
/** Update of meta page failed, probably I/O error */
|
|
#define MDB_PANIC (-30795)
|
|
/** Environment version mismatch */
|
|
#define MDB_VERSION_MISMATCH (-30794)
|
|
/** File is not a valid MDB file */
|
|
#define MDB_INVALID (-30793)
|
|
/** Environment mapsize reached */
|
|
#define MDB_MAP_FULL (-30792)
|
|
/** Environment maxdbs reached */
|
|
#define MDB_DBS_FULL (-30791)
|
|
/** Environment maxreaders reached */
|
|
#define MDB_READERS_FULL (-30790)
|
|
/** Too many TLS keys in use - Windows only */
|
|
#define MDB_TLS_FULL (-30789)
|
|
/** Nested txn has too many dirty pages */
|
|
#define MDB_TXN_FULL (-30788)
|
|
/** Cursor stack too deep - internal error */
|
|
#define MDB_CURSOR_FULL (-30787)
|
|
/** Page has not enough space - internal error */
|
|
#define MDB_PAGE_FULL (-30786)
|
|
#define MDB_LAST_ERRCODE MDB_PAGE_FULL
|
|
/** @} */
|
|
|
|
/** @brief Statistics for a database in the environment */
|
|
typedef struct MDB_stat {
|
|
unsigned int ms_psize; /**< Size of a database page.
|
|
This is currently the same for all databases. */
|
|
unsigned int ms_depth; /**< Depth (height) of the B-tree */
|
|
size_t ms_branch_pages; /**< Number of internal (non-leaf) pages */
|
|
size_t ms_leaf_pages; /**< Number of leaf pages */
|
|
size_t ms_overflow_pages; /**< Number of overflow pages */
|
|
size_t ms_entries; /**< Number of data items */
|
|
} MDB_stat;
|
|
|
|
/** @brief Return the mdb library version information.
|
|
*
|
|
* @param[out] major if non-NULL, the library major version number is copied here
|
|
* @param[out] minor if non-NULL, the library minor version number is copied here
|
|
* @param[out] patch if non-NULL, the library patch version number is copied here
|
|
* @retval "version string" The library version as a string
|
|
*/
|
|
char *mdb_version(int *major, int *minor, int *patch);
|
|
|
|
/** @brief Return a string describing a given error code.
|
|
*
|
|
* This function is a superset of the ANSI C X3.159-1989 (ANSI C) strerror(3)
|
|
* function. If the error code is greater than or equal to 0, then the string
|
|
* returned by the system function strerror(3) is returned. If the error code
|
|
* is less than 0, an error string corresponding to the MDB library error is
|
|
* returned. See @ref errors for a list of MDB-specific error codes.
|
|
* @param[in] err The error code
|
|
* @retval "error message" The description of the error
|
|
*/
|
|
char *mdb_strerror(int err);
|
|
|
|
/** @brief Create an MDB environment handle.
|
|
*
|
|
* This function allocates memory for a #MDB_env structure. To release
|
|
* the allocated memory and discard the handle, call #mdb_env_close().
|
|
* Before the handle may be used, it must be opened using #mdb_env_open().
|
|
* Various other options may also need to be set before opening the handle,
|
|
* e.g. #mdb_env_set_mapsize(), #mdb_env_set_maxreaders(), #mdb_env_set_maxdbs(),
|
|
* depending on usage requirements.
|
|
* @param[out] env The address where the new handle will be stored
|
|
* @return A non-zero error value on failure and 0 on success.
|
|
*/
|
|
int mdb_env_create(MDB_env **env);
|
|
|
|
/** @brief Open an environment handle.
|
|
*
|
|
* If this function fails, #mdb_env_close() must be called to discard the #MDB_env handle.
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[in] path The directory in which the database files reside. This
|
|
* directory must already exist and be writable.
|
|
* @param[in] flags Special options for this environment. This parameter
|
|
* must be set to 0 or by bitwise OR'ing together one or more of the
|
|
* values described here.
|
|
* <ul>
|
|
* <li>#MDB_FIXEDMAP
|
|
* use a fixed address for the mmap region. This flag must be specified
|
|
* when creating the environment, and is stored persistently in the environment.
|
|
* If successful, the memory map will always reside at the same virtual address
|
|
* and pointers used to reference data items in the database will be constant
|
|
* across multiple invocations. This option may not always work, depending on
|
|
* how the operating system has allocated memory to shared libraries and other uses.
|
|
* The feature is highly experimental.
|
|
* <li>#MDB_NOSUBDIR
|
|
* By default, MDB creates its environment in a directory whose
|
|
* pathname is given in \b path, and creates its data and lock files
|
|
* under that directory. With this option, \b path is used as-is for
|
|
* the database main data file. The database lock file is the \b path
|
|
* with "-lock" appended.
|
|
* <li>#MDB_NOSYNC
|
|
* Don't perform a synchronous flush after committing a transaction. This means
|
|
* transactions will exhibit the ACI (atomicity, consistency, and isolation)
|
|
* properties, but not D (durability); that is database integrity will be
|
|
* maintained but it is possible some number of the most recently committed
|
|
* transactions may be undone after a system crash. The number of transactions
|
|
* at risk is governed by how often the system flushes dirty buffers to disk
|
|
* and how often #mdb_env_sync() is called. This flag may be changed
|
|
* at any time using #mdb_env_set_flags().
|
|
* <li>#MDB_NOMETASYNC
|
|
* Don't perform a synchronous flush of the meta page after committing
|
|
* a transaction. This is similar to the #MDB_NOSYNC case, but safer
|
|
* because the transaction data is still flushed. The meta page for any
|
|
* transaction N will be flushed by the data flush of transaction N+1.
|
|
* In case of a system crash, the last committed transaction may be
|
|
* lost. This flag may be changed at any time using #mdb_env_set_flags().
|
|
* <li>#MDB_RDONLY
|
|
* Open the environment in read-only mode. No write operations will be allowed.
|
|
* </ul>
|
|
* @param[in] mode The UNIX permissions to set on created files. This parameter
|
|
* is ignored on Windows.
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>#MDB_VERSION_MISMATCH - the version of the MDB library doesn't match the
|
|
* version that created the database environment.
|
|
* <li>EINVAL - the environment file headers are corrupted.
|
|
* <li>ENOENT - the directory specified by the path parameter doesn't exist.
|
|
* <li>EACCES - the user didn't have permission to access the environment files.
|
|
* <li>EAGAIN - the environment was locked by another process.
|
|
* </ul>
|
|
*/
|
|
int mdb_env_open(MDB_env *env, const char *path, unsigned int flags, mode_t mode);
|
|
|
|
/** @brief Return statistics about the MDB environment.
|
|
*
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[out] stat The address of an #MDB_stat structure
|
|
* where the statistics will be copied
|
|
*/
|
|
int mdb_env_stat(MDB_env *env, MDB_stat *stat);
|
|
|
|
/** @brief Flush the data buffers to disk.
|
|
*
|
|
* Data is always written to disk when #mdb_txn_commit() is called,
|
|
* but the operating system may keep it buffered. MDB always flushes
|
|
* the OS buffers upon commit as well, unless the environment was
|
|
* opened with #MDB_NOSYNC.
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[in] force If non-zero, force the flush to occur. Otherwise
|
|
* if the environment has the #MDB_NOSYNC flag set the flushes
|
|
* will be omitted.
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* <li>EIO - an error occurred during synchronization.
|
|
* </ul>
|
|
*/
|
|
int mdb_env_sync(MDB_env *env, int force);
|
|
|
|
/** @brief Close the environment and release the memory map.
|
|
*
|
|
* Only a single thread may call this function. All transactions, databases,
|
|
* and cursors must already be closed before calling this function. Attempts to
|
|
* use any such handles after calling this function will cause a SIGSEGV.
|
|
* The environment handle will be freed and must not be used again after this call.
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
*/
|
|
void mdb_env_close(MDB_env *env);
|
|
|
|
/** @brief Set environment flags.
|
|
*
|
|
* This may be used to set some flags that weren't already set during
|
|
* #mdb_env_open(), or to unset these flags.
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[in] flags The flags to change, bitwise OR'ed together
|
|
* @param[in] onoff A non-zero value sets the flags, zero clears them.
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_env_set_flags(MDB_env *env, unsigned int flags, int onoff);
|
|
|
|
/** @brief Get environment flags.
|
|
*
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[out] flags The address of an integer to store the flags
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_env_get_flags(MDB_env *env, unsigned int *flags);
|
|
|
|
/** @brief Return the path that was used in #mdb_env_open().
|
|
*
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[out] path Address of a string pointer to contain the path. This
|
|
* is the actual string in the environment, not a copy. It should not be
|
|
* altered in any way.
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_env_get_path(MDB_env *env, const char **path);
|
|
|
|
/** @brief Set the size of the memory map to use for this environment.
|
|
*
|
|
* The size should be a multiple of the OS page size. The default is
|
|
* 10485760 bytes. The size of the memory map is also the maximum size
|
|
* of the database. The value should be chosen as large as possible,
|
|
* to accommodate future growth of the database.
|
|
* This function may only be called after #mdb_env_create() and before #mdb_env_open().
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[in] size The size in bytes
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified, or the environment is already open.
|
|
* </ul>
|
|
*/
|
|
int mdb_env_set_mapsize(MDB_env *env, size_t size);
|
|
|
|
/** @brief Set the maximum number of threads for the environment.
|
|
*
|
|
* This defines the number of slots in the lock table that is used to track readers in the
|
|
* the environment. The default is 126.
|
|
* This function may only be called after #mdb_env_create() and before #mdb_env_open().
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[in] readers The maximum number of threads
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified, or the environment is already open.
|
|
* </ul>
|
|
*/
|
|
int mdb_env_set_maxreaders(MDB_env *env, unsigned int readers);
|
|
|
|
/** @brief Get the maximum number of threads for the environment.
|
|
*
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[out] readers Address of an integer to store the number of readers
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_env_get_maxreaders(MDB_env *env, unsigned int *readers);
|
|
|
|
/** @brief Set the maximum number of databases for the environment.
|
|
*
|
|
* This function is only needed if multiple databases will be used in the
|
|
* environment. Simpler applications that only use a single database can ignore
|
|
* this option.
|
|
* This function may only be called after #mdb_env_create() and before #mdb_env_open().
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[in] dbs The maximum number of databases
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified, or the environment is already open.
|
|
* </ul>
|
|
*/
|
|
int mdb_env_set_maxdbs(MDB_env *env, MDB_dbi dbs);
|
|
|
|
/** @brief Create a transaction for use with the environment.
|
|
*
|
|
* The transaction handle may be discarded using #mdb_txn_abort() or #mdb_txn_commit().
|
|
* @note Transactions may not span threads; a transaction must only be used by a
|
|
* single thread. Also, a thread may only have a single transaction.
|
|
* @note Cursors may not span transactions; each cursor must be opened and closed
|
|
* within a single transaction.
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[in] parent If this parameter is non-NULL, the new transaction
|
|
* will be a nested transaction, with the transaction indicated by \b parent
|
|
* as its parent. Transactions may be nested to any level. A parent
|
|
* transaction may not issue any other operations besides mdb_txn_begin,
|
|
* mdb_txn_abort, or mdb_txn_commit while it has active child transactions.
|
|
* @param[in] flags Special options for this transaction. This parameter
|
|
* must be set to 0 or by bitwise OR'ing together one or more of the
|
|
* values described here.
|
|
* <ul>
|
|
* <li>#MDB_RDONLY
|
|
* This transaction will not perform any write operations.
|
|
* </ul>
|
|
* @param[out] txn Address where the new #MDB_txn handle will be stored
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>#MDB_PANIC - a fatal error occurred earlier and the environment
|
|
* must be shut down.
|
|
* <li>ENOMEM - out of memory, or a read-only transaction was requested and
|
|
* the reader lock table is full. See #mdb_env_set_maxreaders().
|
|
* </ul>
|
|
*/
|
|
int mdb_txn_begin(MDB_env *env, MDB_txn *parent, unsigned int flags, MDB_txn **txn);
|
|
|
|
/** @brief Commit all the operations of a transaction into the database.
|
|
*
|
|
* All cursors opened within the transaction will be closed by this call. The cursors
|
|
* and transaction handle will be freed and must not be used again after this call.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* <li>ENOSPC - no more disk space.
|
|
* <li>EIO - a low-level I/O error occurred while writing.
|
|
* <li>ENOMEM - the transaction is nested and could not be merged into its parent.
|
|
* </ul>
|
|
*/
|
|
int mdb_txn_commit(MDB_txn *txn);
|
|
|
|
/** @brief Abandon all the operations of the transaction instead of saving them.
|
|
*
|
|
* All cursors opened within the transaction will be closed by this call. The cursors
|
|
* and transaction handle will be freed and must not be used again after this call.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
*/
|
|
void mdb_txn_abort(MDB_txn *txn);
|
|
|
|
/** @brief Reset a read-only transaction.
|
|
*
|
|
* This releases the current reader lock but doesn't free the
|
|
* transaction handle, allowing it to be used again later by #mdb_txn_renew().
|
|
* It otherwise has the same effect as #mdb_txn_abort() but saves some memory
|
|
* allocation/deallocation overhead if a thread is going to start a new
|
|
* read-only transaction again soon.
|
|
* All cursors opened within the transaction must be closed before the transaction
|
|
* is reset.
|
|
* Reader locks generally don't interfere with writers, but they keep old
|
|
* versions of database pages allocated. Thus they prevent the old pages
|
|
* from being reused when writers commit new data, and so under heavy load
|
|
* the database size may grow much more rapidly than otherwise.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
*/
|
|
void mdb_txn_reset(MDB_txn *txn);
|
|
|
|
/** @brief Renew a read-only transaction.
|
|
*
|
|
* This acquires a new reader lock for a transaction handle that had been
|
|
* released by #mdb_txn_reset(). It must be called before a reset transaction
|
|
* may be used again.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>#MDB_PANIC - a fatal error occurred earlier and the environment
|
|
* must be shut down.
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_txn_renew(MDB_txn *txn);
|
|
|
|
/** @brief Open a database in the environment.
|
|
*
|
|
* The database handle may be discarded by calling #mdb_close(). The
|
|
* database handle resides in the shared environment, it is not owned
|
|
* by the given transaction. Only one thread should call this function;
|
|
* it is not mutex-protected in a read-only transaction.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] name The name of the database to open. If only a single
|
|
* database is needed in the environment, this value may be NULL.
|
|
* @param[in] flags Special options for this database. This parameter
|
|
* must be set to 0 or by bitwise OR'ing together one or more of the
|
|
* values described here.
|
|
* <ul>
|
|
* <li>#MDB_REVERSEKEY
|
|
* Keys are strings to be compared in reverse order, from the end
|
|
* of the strings to the beginning. By default, Keys are treated as strings and
|
|
* compared from beginning to end.
|
|
* <li>#MDB_DUPSORT
|
|
* Duplicate keys may be used in the database. (Or, from another perspective,
|
|
* keys may have multiple data items, stored in sorted order.) By default
|
|
* keys must be unique and may have only a single data item.
|
|
* <li>#MDB_INTEGERKEY
|
|
* Keys are binary integers in native byte order. Setting this option
|
|
* requires all keys to be the same size, typically sizeof(int)
|
|
* or sizeof(size_t).
|
|
* <li>#MDB_DUPFIXED
|
|
* This flag may only be used in combination with #MDB_DUPSORT. This option
|
|
* tells the library that the data items for this database are all the same
|
|
* size, which allows further optimizations in storage and retrieval. When
|
|
* all data items are the same size, the #MDB_GET_MULTIPLE and #MDB_NEXT_MULTIPLE
|
|
* cursor operations may be used to retrieve multiple items at once.
|
|
* <li>#MDB_INTEGERDUP
|
|
* This option specifies that duplicate data items are also integers, and
|
|
* should be sorted as such.
|
|
* <li>#MDB_REVERSEDUP
|
|
* This option specifies that duplicate data items should be compared as
|
|
* strings in reverse order.
|
|
* <li>#MDB_CREATE
|
|
* Create the named database if it doesn't exist. This option is not
|
|
* allowed in a read-only transaction or a read-only environment.
|
|
* </ul>
|
|
* @param[out] dbi Address where the new #MDB_dbi handle will be stored
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>#MDB_NOTFOUND - the specified database doesn't exist in the environment
|
|
* and #MDB_CREATE was not specified.
|
|
* <li>ENFILE - too many databases have been opened. See #mdb_env_set_maxdbs().
|
|
* </ul>
|
|
*/
|
|
int mdb_open(MDB_txn *txn, const char *name, unsigned int flags, MDB_dbi *dbi);
|
|
|
|
/** @brief Retrieve statistics for a database.
|
|
*
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[out] stat The address of an #MDB_stat structure
|
|
* where the statistics will be copied
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_stat(MDB_txn *txn, MDB_dbi dbi, MDB_stat *stat);
|
|
|
|
/** @brief Close a database handle.
|
|
*
|
|
* This call is not mutex protected. Handles should only be closed by
|
|
* a single thread, and only if no other threads are going to reference
|
|
* the database handle any further.
|
|
* @param[in] env An environment handle returned by #mdb_env_create()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
*/
|
|
void mdb_close(MDB_env *env, MDB_dbi dbi);
|
|
|
|
/** @brief Delete a database and/or free all its pages.
|
|
*
|
|
* If the \b del parameter is non-zero the DB handle will be closed
|
|
* and the DB will be deleted.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[in] del non-zero to delete the DB from the environment,
|
|
* otherwise just free its pages.
|
|
* @return A non-zero error value on failure and 0 on success.
|
|
*/
|
|
int mdb_drop(MDB_txn *txn, MDB_dbi dbi, int del);
|
|
|
|
/** @brief Set a custom key comparison function for a database.
|
|
*
|
|
* The comparison function is called whenever it is necessary to compare a
|
|
* key specified by the application with a key currently stored in the database.
|
|
* If no comparison function is specified, and no special key flags were specified
|
|
* with #mdb_open(), the keys are compared lexically, with shorter keys collating
|
|
* before longer keys.
|
|
* @warning This function must be called before any data access functions are used,
|
|
* otherwise data corruption may occur. The same comparison function must be used by every
|
|
* program accessing the database, every time the database is used.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[in] cmp A #MDB_cmp_func function
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_set_compare(MDB_txn *txn, MDB_dbi dbi, MDB_cmp_func *cmp);
|
|
|
|
/** @brief Set a custom data comparison function for a #MDB_DUPSORT database.
|
|
*
|
|
* This comparison function is called whenever it is necessary to compare a data
|
|
* item specified by the application with a data item currently stored in the database.
|
|
* This function only takes effect if the database was opened with the #MDB_DUPSORT
|
|
* flag.
|
|
* If no comparison function is specified, and no special key flags were specified
|
|
* with #mdb_open(), the data items are compared lexically, with shorter items collating
|
|
* before longer items.
|
|
* @warning This function must be called before any data access functions are used,
|
|
* otherwise data corruption may occur. The same comparison function must be used by every
|
|
* program accessing the database, every time the database is used.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[in] cmp A #MDB_cmp_func function
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_set_dupsort(MDB_txn *txn, MDB_dbi dbi, MDB_cmp_func *cmp);
|
|
|
|
/** @brief Set a relocation function for a #MDB_FIXEDMAP database.
|
|
*
|
|
* @todo The relocation function is called whenever it is necessary to move the data
|
|
* of an item to a different position in the database (e.g. through tree
|
|
* balancing operations, shifts as a result of adds or deletes, etc.). It is
|
|
* intended to allow address/position-dependent data items to be stored in
|
|
* a database in an environment opened with the #MDB_FIXEDMAP option.
|
|
* Currently the relocation feature is unimplemented and setting
|
|
* this function has no effect.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[in] rel A #MDB_rel_func function
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_set_relfunc(MDB_txn *txn, MDB_dbi dbi, MDB_rel_func *rel);
|
|
|
|
/** @brief Set a context pointer for a #MDB_FIXEDMAP database's relocation function.
|
|
*
|
|
* See #mdb_set_relfunc and #MDB_rel_func for more details.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[in] ctx An arbitrary pointer for whatever the application needs.
|
|
* It will be passed to the callback function set by #mdb_set_relfunc
|
|
* as its \b relctx parameter whenever the callback is invoked.
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_set_relctx(MDB_txn *txn, MDB_dbi dbi, void *ctx);
|
|
|
|
/** @brief Get items from a database.
|
|
*
|
|
* This function retrieves key/data pairs from the database. The address
|
|
* and length of the data associated with the specified \b key are returned
|
|
* in the structure to which \b data refers.
|
|
* If the database supports duplicate keys (#MDB_DUPSORT) then the
|
|
* first data item for the key will be returned. Retrieval of other
|
|
* items requires the use of #mdb_cursor_get().
|
|
*
|
|
* @note The memory pointed to by the returned values is owned by the
|
|
* database. The caller need not dispose of the memory, and may not
|
|
* modify it in any way. For values returned in a read-only transaction
|
|
* any modification attempts will cause a SIGSEGV.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[in] key The key to search for in the database
|
|
* @param[out] data The data corresponding to the key
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>#MDB_NOTFOUND - the key was not in the database.
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_get(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data);
|
|
|
|
/** @brief Store items into a database.
|
|
*
|
|
* This function stores key/data pairs in the database. The default behavior
|
|
* is to enter the new key/data pair, replacing any previously existing key
|
|
* if duplicates are disallowed, or adding a duplicate data item if
|
|
* duplicates are allowed (#MDB_DUPSORT).
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[in] key The key to store in the database
|
|
* @param[in,out] data The data to store
|
|
* @param[in] flags Special options for this operation. This parameter
|
|
* must be set to 0 or by bitwise OR'ing together one or more of the
|
|
* values described here.
|
|
* <ul>
|
|
* <li>#MDB_NODUPDATA - enter the new key/data pair only if it does not
|
|
* already appear in the database. This flag may only be specified
|
|
* if the database was opened with #MDB_DUPSORT. The function will
|
|
* return #MDB_KEYEXIST if the key/data pair already appears in the
|
|
* database.
|
|
* <li>#MDB_NOOVERWRITE - enter the new key/data pair only if the key
|
|
* does not already appear in the database. The function will return
|
|
* #MDB_KEYEXIST if the key already appears in the database, even if
|
|
* the database supports duplicates (#MDB_DUPSORT). The \b data
|
|
* parameter will be set to point to the existing item.
|
|
* <li>#MDB_RESERVE - reserve space for data of the given size, but
|
|
* don't copy the given data. Instead, return a pointer to the
|
|
* reserved space, which the caller can fill in later. This saves
|
|
* an extra memcpy if the data is being generated later.
|
|
* <li>#MDB_APPEND - append the given key/data pair to the end of the
|
|
* database. No key comparisons are performed. This option allows
|
|
* fast bulk loading when keys are already known to be in the
|
|
* correct order. Loading unsorted keys with this flag will cause
|
|
* data corruption.
|
|
* <li>#MDB_APPENDDUP - as above, but for sorted dup data.
|
|
* </ul>
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EACCES - an attempt was made to write in a read-only transaction.
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* <li>ENOMEM - the database is full, see #mdb_env_set_mapsize().
|
|
* </ul>
|
|
*/
|
|
int mdb_put(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data,
|
|
unsigned int flags);
|
|
|
|
/** @brief Delete items from a database.
|
|
*
|
|
* This function removes key/data pairs from the database.
|
|
* If the database does not support sorted duplicate data items
|
|
* (#MDB_DUPSORT) the data parameter is ignored.
|
|
* If the database supports sorted duplicates and the data parameter
|
|
* is NULL, all of the duplicate data items for the key will be
|
|
* deleted. Otherwise, if the data parameter is non-NULL
|
|
* only the matching data item will be deleted.
|
|
* This function will return #MDB_NOTFOUND if the specified key/data
|
|
* pair is not in the database.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[in] key The key to delete from the database
|
|
* @param[in] data The data to delete
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EACCES - an attempt was made to write in a read-only transaction.
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_del(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data);
|
|
|
|
/** @brief Create a cursor handle.
|
|
*
|
|
* Cursors are associated with a specific transaction and database and
|
|
* may not span threads.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[out] cursor Address where the new #MDB_cursor handle will be stored
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_cursor_open(MDB_txn *txn, MDB_dbi dbi, MDB_cursor **cursor);
|
|
|
|
/** @brief Close a cursor handle.
|
|
*
|
|
* The cursor handle will be freed and must not be used again after this call.
|
|
* @param[in] cursor A cursor handle returned by #mdb_cursor_open()
|
|
*/
|
|
void mdb_cursor_close(MDB_cursor *cursor);
|
|
|
|
/** @brief Renew a cursor handle.
|
|
*
|
|
* Cursors are associated with a specific transaction and database and
|
|
* may not span threads. Cursors that are only used in read-only
|
|
* transactions may be re-used, to avoid unnecessary malloc/free overhead.
|
|
* The cursor may be associated with a new read-only transaction, and
|
|
* referencing the same database handle as it was created with.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] cursor A cursor handle returned by #mdb_cursor_open()
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_cursor_renew(MDB_txn *txn, MDB_cursor *cursor);
|
|
|
|
/** @brief Return the cursor's transaction handle.
|
|
*
|
|
* @param[in] cursor A cursor handle returned by #mdb_cursor_open()
|
|
*/
|
|
MDB_txn *mdb_cursor_txn(MDB_cursor *cursor);
|
|
|
|
/** @brief Return the cursor's database handle.
|
|
*
|
|
* @param[in] cursor A cursor handle returned by #mdb_cursor_open()
|
|
*/
|
|
MDB_dbi mdb_cursor_dbi(MDB_cursor *cursor);
|
|
|
|
/** @brief Retrieve by cursor.
|
|
*
|
|
* This function retrieves key/data pairs from the database. The address and length
|
|
* of the key are returned in the object to which \b key refers (except for the
|
|
* case of the #MDB_SET option, in which the \b key object is unchanged), and
|
|
* the address and length of the data are returned in the object to which \b data
|
|
* refers.
|
|
* @param[in] cursor A cursor handle returned by #mdb_cursor_open()
|
|
* @param[in,out] key The key for a retrieved item
|
|
* @param[in,out] data The data of a retrieved item
|
|
* @param[in] op A cursor operation #MDB_cursor_op
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>#MDB_NOTFOUND - no matching key found.
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_cursor_get(MDB_cursor *cursor, MDB_val *key, MDB_val *data,
|
|
MDB_cursor_op op);
|
|
|
|
/** @brief Store by cursor.
|
|
*
|
|
* This function stores key/data pairs into the database.
|
|
* If the function fails for any reason, the state of the cursor will be
|
|
* unchanged. If the function succeeds and an item is inserted into the
|
|
* database, the cursor is always positioned to refer to the newly inserted item.
|
|
* @param[in] cursor A cursor handle returned by #mdb_cursor_open()
|
|
* @param[in] key The key operated on.
|
|
* @param[in] data The data operated on.
|
|
* @param[in] flags Options for this operation. This parameter
|
|
* must be set to 0 or one of the values described here.
|
|
* <ul>
|
|
* <li>#MDB_CURRENT - overwrite the data of the key/data pair to which
|
|
* the cursor refers with the specified data item. The \b key
|
|
* parameter is ignored.
|
|
* <li>#MDB_NODUPDATA - enter the new key/data pair only if it does not
|
|
* already appear in the database. This flag may only be specified
|
|
* if the database was opened with #MDB_DUPSORT. The function will
|
|
* return #MDB_KEYEXIST if the key/data pair already appears in the
|
|
* database.
|
|
* <li>#MDB_NOOVERWRITE - enter the new key/data pair only if the key
|
|
* does not already appear in the database. The function will return
|
|
* #MDB_KEYEXIST if the key already appears in the database, even if
|
|
* the database supports duplicates (#MDB_DUPSORT).
|
|
* <li>#MDB_RESERVE - reserve space for data of the given size, but
|
|
* don't copy the given data. Instead, return a pointer to the
|
|
* reserved space, which the caller can fill in later. This saves
|
|
* an extra memcpy if the data is being generated later.
|
|
* <li>#MDB_APPEND - append the given key/data pair to the end of the
|
|
* database. No key comparisons are performed. This option allows
|
|
* fast bulk loading when keys are already known to be in the
|
|
* correct order. Loading unsorted keys with this flag will cause
|
|
* data corruption.
|
|
* <li>#MDB_APPENDDUP - as above, but for sorted dup data.
|
|
* </ul>
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EACCES - an attempt was made to modify a read-only database.
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_cursor_put(MDB_cursor *cursor, MDB_val *key, MDB_val *data,
|
|
unsigned int flags);
|
|
|
|
/** @brief Delete current key/data pair
|
|
*
|
|
* This function deletes the key/data pair to which the cursor refers.
|
|
* @param[in] cursor A cursor handle returned by #mdb_cursor_open()
|
|
* @param[in] flags Options for this operation. This parameter
|
|
* must be set to 0 or one of the values described here.
|
|
* <ul>
|
|
* <li>#MDB_NODUPDATA - delete all of the data items for the current key.
|
|
* This flag may only be specified if the database was opened with #MDB_DUPSORT.
|
|
* </ul>
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EACCES - an attempt was made to modify a read-only database.
|
|
* <li>EINVAL - an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_cursor_del(MDB_cursor *cursor, unsigned int flags);
|
|
|
|
/** @brief Return count of duplicates for current key.
|
|
*
|
|
* This call is only valid on databases that support sorted duplicate
|
|
* data items #MDB_DUPSORT.
|
|
* @param[in] cursor A cursor handle returned by #mdb_cursor_open()
|
|
* @param[out] countp Address where the count will be stored
|
|
* @return A non-zero error value on failure and 0 on success. Some possible
|
|
* errors are:
|
|
* <ul>
|
|
* <li>EINVAL - cursor is not initialized, or an invalid parameter was specified.
|
|
* </ul>
|
|
*/
|
|
int mdb_cursor_count(MDB_cursor *cursor, size_t *countp);
|
|
|
|
/** @brief Compare two data items according to a particular database.
|
|
*
|
|
* This returns a comparison as if the two data items were keys in the
|
|
* specified database.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[in] a The first item to compare
|
|
* @param[in] b The second item to compare
|
|
* @return < 0 if a < b, 0 if a == b, > 0 if a > b
|
|
*/
|
|
int mdb_cmp(MDB_txn *txn, MDB_dbi dbi, const MDB_val *a, const MDB_val *b);
|
|
|
|
/** @brief Compare two data items according to a particular database.
|
|
*
|
|
* This returns a comparison as if the two items were data items of
|
|
* a sorted duplicates #MDB_DUPSORT database.
|
|
* @param[in] txn A transaction handle returned by #mdb_txn_begin()
|
|
* @param[in] dbi A database handle returned by #mdb_open()
|
|
* @param[in] a The first item to compare
|
|
* @param[in] b The second item to compare
|
|
* @return < 0 if a < b, 0 if a == b, > 0 if a > b
|
|
*/
|
|
int mdb_dcmp(MDB_txn *txn, MDB_dbi dbi, const MDB_val *a, const MDB_val *b);
|
|
/** @} */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif /* _MDB_H_ */
|