Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
// Copyright 2018 Mozilla
|
|
|
|
//
|
|
|
|
// Licensed under the Apache License, Version 2.0 (the "License"); you may not use
|
|
|
|
// this file except in compliance with the License. You may obtain a copy of the
|
|
|
|
// License at http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
// Unless required by applicable law or agreed to in writing, software distributed
|
|
|
|
// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
|
|
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
|
|
|
|
// specific language governing permissions and limitations under the License.
|
|
|
|
|
2020-01-14 15:46:21 +00:00
|
|
|
use mentat_core::Keyword;
|
Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
|
2020-01-14 15:46:21 +00:00
|
|
|
use mentat_db::CORE_SCHEMA_VERSION;
|
Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
|
2020-01-14 15:46:21 +00:00
|
|
|
use public_traits::errors::Result;
|
Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
|
2020-01-14 15:46:21 +00:00
|
|
|
use tolstoy_traits::errors::TolstoyError;
|
Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
|
2020-01-14 15:46:21 +00:00
|
|
|
use crate::datoms::DatomsHelper;
|
Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
|
2020-01-14 15:46:21 +00:00
|
|
|
use crate::types::Tx;
|
Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
|
|
|
|
pub struct BootstrapHelper<'a> {
|
2020-01-14 15:46:21 +00:00
|
|
|
parts: DatomsHelper<'a>,
|
Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
impl<'a> BootstrapHelper<'a> {
|
|
|
|
pub fn new(assumed_bootstrap_tx: &Tx) -> BootstrapHelper {
|
|
|
|
BootstrapHelper {
|
|
|
|
parts: DatomsHelper::new(&assumed_bootstrap_tx.parts),
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// TODO we could also iterate through our own bootstrap schema definition and check that everything matches
|
|
|
|
// "version" is used here as a proxy for doing that work
|
|
|
|
pub fn is_compatible(&self) -> Result<bool> {
|
|
|
|
Ok(self.core_schema_version()? == CORE_SCHEMA_VERSION as i64)
|
|
|
|
}
|
|
|
|
|
|
|
|
pub fn core_schema_version(&self) -> Result<i64> {
|
|
|
|
match self.parts.ea_lookup(
|
|
|
|
Keyword::namespaced("db.schema", "core"),
|
|
|
|
Keyword::namespaced("db.schema", "version"),
|
|
|
|
) {
|
|
|
|
Some(v) => {
|
|
|
|
// TODO v is just a type tag and a Copy value, we shouldn't need to clone.
|
|
|
|
match v.clone().into_long() {
|
|
|
|
Some(v) => Ok(v),
|
2020-01-14 15:46:21 +00:00
|
|
|
None => bail!(TolstoyError::BadRemoteState(
|
|
|
|
"incorrect type for core schema version".to_string()
|
|
|
|
)),
|
Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
}
|
2020-01-14 15:46:21 +00:00
|
|
|
}
|
|
|
|
None => bail!(TolstoyError::BadRemoteState(
|
|
|
|
"missing core schema version".to_string()
|
|
|
|
)),
|
Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#[cfg(test)]
|
|
|
|
mod tests {
|
|
|
|
use super::*;
|
|
|
|
|
2020-01-14 15:46:21 +00:00
|
|
|
use mentat_db::debug::TestConn;
|
Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
|
2020-01-14 15:46:21 +00:00
|
|
|
use crate::debug::txs_after;
|
Basic sync support (#563) r=nalexander
* Pre: remove remnants of 'open_empty'
* Pre: Cleanup 'datoms' table after a timeline move
Since timeline move operations use a transactor, they generate a
"phantom" 'tx' and a 'txInstant' assertion. It is "phantom" in a sense
that it was never present in the 'transactions' table, and is entirely
synthetic as far as our database is concerned.
It's an implementational artifact, and we were not cleaning it up.
It becomes a problem when we start inserting transactions after a move.
Once the transactor clashes with the phantom 'tx', it will retract the
phantom 'txInstant' value, leaving the transactions log in an incorrect state.
This patch adds a test for this scenario and elects the easy way out: simply
remove the offending 'txInstant' datom.
* Part 1: Sync without support for side-effects
A "side-effect" is defined here as a mutation of a remote state as part
of the sync.
If, during a sync we determine that a remote state needs to be changed, bail out.
This generally supports different variations of "baton-passing" syncing, where clients
will succeed syncing if each change is non-conflicting.
* Part 2: Support basic "side-effects" syncing
This patch introduces a concept of a follow-up sync. If a sync generated
a "merge transaction" (a regular transaction that contains assertions
necessary for local and remote transaction logs to converge), then
this transaction needs to be uploaded in a follow-up sync.
Generated SyncReport indicates if a follow-up sync is required.
Follow-up sync itself is just a regular sync. If remote state did not change,
it will result in a simple RemoteFastForward. Otherwise, we'll continue
merging and requesting a follow-up.
Schema alterations are explicitly not supported.
As local transactions are rebased on top of remote, following changes happen:
- entids are changed into tempids, letting transactor upsert :db/unique values
- entids for retractions are changed into lookup-refs if we're confident they'll succeed
-- otherwise, retractions are dropped on the floor
* Post: use a macro for more readable tests
* Tolstoy README
2018-09-08 02:18:20 +00:00
|
|
|
|
|
|
|
#[test]
|
|
|
|
fn test_bootstrap_version() {
|
|
|
|
let remote = TestConn::default();
|
|
|
|
|
|
|
|
let remote_txs = txs_after(&remote.sqlite, &remote.schema, remote.last_tx_id() - 1);
|
|
|
|
|
|
|
|
assert_eq!(1, remote_txs.len());
|
|
|
|
|
|
|
|
let bh = BootstrapHelper::new(&remote_txs[0]);
|
|
|
|
assert_eq!(1, bh.core_schema_version().expect("schema version"));
|
|
|
|
}
|
|
|
|
}
|