mentat/db/src/schema.rs

535 lines
20 KiB
Rust
Raw Normal View History

// Copyright 2016 Mozilla
//
// Licensed under the Apache License, Version 2.0 (the "License"); you may not use
// this file except in compliance with the License. You may obtain a copy of the
// License at http://www.apache.org/licenses/LICENSE-2.0
// Unless required by applicable law or agreed to in writing, software distributed
// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.
#![allow(dead_code)]
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341) * Pre: Drop unneeded tx0 from search results. * Pre: Don't require a schema in some of the DB code. The idea is to separate the transaction applying code, which is schema-aware, from the concrete storage code, which is just concerned with getting bits onto disk. * Pre: Only reference Schema, not DB, in debug module. This is part of a larger separation of the volatile PartitionMap, which is modified every transaction, from the stable Schema, which is infrequently modified. * Pre: Fix indentation. * Extract part of DB to new SchemaTypeChecking trait. * Extract part of DB to new PartitionMapping trait. * Pre: Don't expect :db.part/tx partition to advance when tx fails. This fails right now, because we allocate tx IDs even when we shouldn't. * Sketch a db interface without DB. * Add ValueParseError; use error-chain in tx-parser. This can be simplified when https://github.com/Marwes/combine/issues/86 makes it to a published release, but this unblocks us for now. This converts the `combine` error type `ParseError<&'a [edn::Value]>` to a type with owned `Vec<edn::Value>` collections, re-using `edn::Value::Vector` for making them `Display`. * Pre: Accept Borrow<Schema> instead of just &Schema in debug module. This makes it easy to use Rc<Schema> or Arc<Schema> without inserting &* sigils throughout the code. * Use error-chain in query-parser. There are a few things to point out here: - the fine grained error types have been flattened into one crate-wide error type; it's pretty easy to regain the granularity as needed. - edn::ParseError is automatically lifted to mentat_query_parser::errors::Error; - we use mentat_parser_utils::ValueParser to maintain parsing error information from `combine`. * Patch up top-level. * Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
use db::TypedSQLValue;
use edn;
use errors::{ErrorKind, Result};
use edn::symbols;
use mentat_core::{
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
attribute,
Attribute,
Entid,
EntidMap,
HasSchema,
IdentMap,
KnownEntid,
Schema,
AttributeMap,
TypedValue,
ValueType,
};
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
use metadata;
use metadata::{
AttributeAlteration,
};
pub trait AttributeValidation {
fn validate<F>(&self, ident: F) -> Result<()> where F: Fn() -> String;
}
impl AttributeValidation for Attribute {
fn validate<F>(&self, ident: F) -> Result<()> where F: Fn() -> String {
if self.unique == Some(attribute::Unique::Value) && !self.index {
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
bail!(ErrorKind::BadSchemaAssertion(format!(":db/unique :db/unique_value without :db/index true for entid: {}", ident())))
}
if self.unique == Some(attribute::Unique::Identity) && !self.index {
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
bail!(ErrorKind::BadSchemaAssertion(format!(":db/unique :db/unique_identity without :db/index true for entid: {}", ident())))
}
if self.fulltext && self.value_type != ValueType::String {
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
bail!(ErrorKind::BadSchemaAssertion(format!(":db/fulltext true without :db/valueType :db.type/string for entid: {}", ident())))
}
if self.fulltext && !self.index {
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
bail!(ErrorKind::BadSchemaAssertion(format!(":db/fulltext true without :db/index true for entid: {}", ident())))
}
if self.component && self.value_type != ValueType::Ref {
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
bail!(ErrorKind::BadSchemaAssertion(format!(":db/isComponent true without :db/valueType :db.type/ref for entid: {}", ident())))
}
// TODO: consider warning if we have :db/index true for :db/valueType :db.type/string,
// since this may be inefficient. More generally, we should try to drive complex
// :db/valueType (string, uri, json in the future) users to opt-in to some hash-indexing
// scheme, as discussed in https://github.com/mozilla/mentat/issues/69.
Ok(())
}
}
/// Return `Ok(())` if `attribute_map` defines a valid Mentat schema.
fn validate_attribute_map(entid_map: &EntidMap, attribute_map: &AttributeMap) -> Result<()> {
for (entid, attribute) in attribute_map {
let ident = || entid_map.get(entid).map(|ident| ident.to_string()).unwrap_or(entid.to_string());
attribute.validate(ident)?;
}
Ok(())
}
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
#[derive(Clone,Debug,Default,Eq,Hash,Ord,PartialOrd,PartialEq)]
pub struct AttributeBuilder {
helpful: bool,
pub value_type: Option<ValueType>,
pub multival: Option<bool>,
pub unique: Option<Option<attribute::Unique>>,
pub index: Option<bool>,
pub fulltext: Option<bool>,
pub component: Option<bool>,
pub no_history: Option<bool>,
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
}
impl AttributeBuilder {
/// Make a new AttributeBuilder for human consumption: it will help you
/// by flipping relevant flags.
pub fn helpful() -> Self {
AttributeBuilder {
helpful: true,
..Default::default()
}
}
/// Make a new AttributeBuilder from an existing Attribute. This is important to allow
/// retraction. Only attributes that we allow to change are duplicated here.
pub fn to_modify_attribute(attribute: &Attribute) -> Self {
let mut ab = AttributeBuilder::default();
ab.multival = Some(attribute.multival);
ab.unique = Some(attribute.unique);
ab.component = Some(attribute.component);
ab
}
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
pub fn value_type<'a>(&'a mut self, value_type: ValueType) -> &'a mut Self {
self.value_type = Some(value_type);
self
}
pub fn multival<'a>(&'a mut self, multival: bool) -> &'a mut Self {
self.multival = Some(multival);
self
}
pub fn non_unique<'a>(&'a mut self) -> &'a mut Self {
self.unique = Some(None);
self
}
pub fn unique<'a>(&'a mut self, unique: attribute::Unique) -> &'a mut Self {
if self.helpful && unique == attribute::Unique::Identity {
self.index = Some(true);
}
self.unique = Some(Some(unique));
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
self
}
pub fn index<'a>(&'a mut self, index: bool) -> &'a mut Self {
self.index = Some(index);
self
}
pub fn fulltext<'a>(&'a mut self, fulltext: bool) -> &'a mut Self {
self.fulltext = Some(fulltext);
if self.helpful && fulltext {
self.index = Some(true);
}
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
self
}
pub fn component<'a>(&'a mut self, component: bool) -> &'a mut Self {
self.component = Some(component);
self
}
pub fn no_history<'a>(&'a mut self, no_history: bool) -> &'a mut Self {
self.no_history = Some(no_history);
self
}
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
pub fn validate_install_attribute(&self) -> Result<()> {
if self.value_type.is_none() {
bail!(ErrorKind::BadSchemaAssertion("Schema attribute for new attribute does not set :db/valueType".into()));
}
Ok(())
}
pub fn validate_alter_attribute(&self) -> Result<()> {
if self.value_type.is_some() {
bail!(ErrorKind::BadSchemaAssertion("Schema alteration must not set :db/valueType".into()));
}
if self.fulltext.is_some() {
bail!(ErrorKind::BadSchemaAssertion("Schema alteration must not set :db/fulltext".into()));
}
Ok(())
}
pub fn build(&self) -> Attribute {
let mut attribute = Attribute::default();
if let Some(value_type) = self.value_type {
attribute.value_type = value_type;
}
if let Some(fulltext) = self.fulltext {
attribute.fulltext = fulltext;
}
if let Some(multival) = self.multival {
attribute.multival = multival;
}
if let Some(ref unique) = self.unique {
attribute.unique = unique.clone();
}
if let Some(index) = self.index {
attribute.index = index;
}
if let Some(component) = self.component {
attribute.component = component;
}
if let Some(no_history) = self.no_history {
attribute.no_history = no_history;
}
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
attribute
}
pub fn mutate(&self, attribute: &mut Attribute) -> Vec<AttributeAlteration> {
let mut mutations = Vec::new();
if let Some(multival) = self.multival {
if multival != attribute.multival {
attribute.multival = multival;
mutations.push(AttributeAlteration::Cardinality);
}
}
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
if let Some(ref unique) = self.unique {
if *unique != attribute.unique {
attribute.unique = unique.clone();
mutations.push(AttributeAlteration::Unique);
}
} else {
if attribute.unique != None {
attribute.unique = None;
mutations.push(AttributeAlteration::Unique);
}
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
}
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
if let Some(index) = self.index {
if index != attribute.index {
attribute.index = index;
mutations.push(AttributeAlteration::Index);
}
}
if let Some(component) = self.component {
if component != attribute.component {
attribute.component = component;
mutations.push(AttributeAlteration::IsComponent);
}
}
if let Some(no_history) = self.no_history {
if no_history != attribute.no_history {
attribute.no_history = no_history;
mutations.push(AttributeAlteration::NoHistory);
}
}
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
mutations
}
}
pub trait SchemaBuilding {
fn require_ident(&self, entid: Entid) -> Result<&symbols::NamespacedKeyword>;
fn require_entid(&self, ident: &symbols::NamespacedKeyword) -> Result<KnownEntid>;
fn require_attribute_for_entid(&self, entid: Entid) -> Result<&Attribute>;
fn from_ident_map_and_attribute_map(ident_map: IdentMap, attribute_map: AttributeMap) -> Result<Schema>;
fn from_ident_map_and_triples<U>(ident_map: IdentMap, assertions: U) -> Result<Schema>
where U: IntoIterator<Item=(symbols::NamespacedKeyword, symbols::NamespacedKeyword, TypedValue)>;
}
impl SchemaBuilding for Schema {
fn require_ident(&self, entid: Entid) -> Result<&symbols::NamespacedKeyword> {
self.get_ident(entid).ok_or(ErrorKind::UnrecognizedEntid(entid).into())
}
fn require_entid(&self, ident: &symbols::NamespacedKeyword) -> Result<KnownEntid> {
self.get_entid(&ident).ok_or(ErrorKind::UnrecognizedIdent(ident.to_string()).into())
}
fn require_attribute_for_entid(&self, entid: Entid) -> Result<&Attribute> {
self.attribute_for_entid(entid).ok_or(ErrorKind::UnrecognizedEntid(entid).into())
}
/// Create a valid `Schema` from the constituent maps.
fn from_ident_map_and_attribute_map(ident_map: IdentMap, attribute_map: AttributeMap) -> Result<Schema> {
let entid_map: EntidMap = ident_map.iter().map(|(k, v)| (v.clone(), k.clone())).collect();
validate_attribute_map(&entid_map, &attribute_map)?;
Ok(Schema::new(ident_map, entid_map, attribute_map))
}
/// Turn vec![(NamespacedKeyword(:ident), NamespacedKeyword(:key), TypedValue(:value)), ...] into a Mentat `Schema`.
fn from_ident_map_and_triples<U>(ident_map: IdentMap, assertions: U) -> Result<Schema>
where U: IntoIterator<Item=(symbols::NamespacedKeyword, symbols::NamespacedKeyword, TypedValue)>{
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
let entid_assertions: Result<Vec<(Entid, Entid, TypedValue)>> = assertions.into_iter().map(|(symbolic_ident, symbolic_attr, value)| {
let ident: i64 = *ident_map.get(&symbolic_ident).ok_or(ErrorKind::UnrecognizedIdent(symbolic_ident.to_string()))?;
let attr: i64 = *ident_map.get(&symbolic_attr).ok_or(ErrorKind::UnrecognizedIdent(symbolic_attr.to_string()))?;
Ok((ident, attr, value))
}).collect();
let mut schema = Schema::from_ident_map_and_attribute_map(ident_map, AttributeMap::default())?;
let metadata_report = metadata::update_attribute_map_from_entid_triples(&mut schema.attribute_map,
entid_assertions?,
// No retractions.
::std::iter::empty())?;
// Rebuild the component attributes list if necessary.
if metadata_report.attributes_did_change() {
schema.update_component_attributes();
}
Schema alteration. Fixes #294 and #295. (#370) r=rnewman * Pre: Don't retract :db/ident in test. Datomic (and eventually Mentat) don't allow to retract :db/ident in this way, so this runs afoul of future work to support mutating metadata. * Pre: s/VALUETYPE/VALUE_TYPE/. This is consistent with the capitalization (which is "valueType") and the other identifier. * Pre: Remove some single quotes from error output. * Part 1: Make materialized views be uniform [e a v value_type_tag]. This looks ahead to a time when we could support arbitrary user-defined materialized views. For now, the "idents" materialized view is those datoms of the form [e :db/ident :namespaced/keyword] and the "schema" materialized view is those datoms of the form [e a v] where a is in a particular set of attributes that will become clear in the following commits. This change is not backwards compatible, so I'm removing the open current (really, v2) test. It'll be re-instated when we get to https://github.com/mozilla/mentat/issues/194. * Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output. * Part 3: Separate `schema_to_mutate` from the `schema` used to interpret. This is just to keep track of the expected changes during bootstrapping. I want bootstrap metadata mutations to flow through the same code path as metadata mutations during regular transactions; by differentiating the schema used for interpretation from the schema that will be updated I expect to be able to apply bootstrap metadata mutations to an empty schema and have things like materialized views created (using the regular code paths). This commit has been re-ordered for conceptual clarity, but it won't compile because it references the metadata module. It's possible to make it compile -- the functionality is there in the schema module -- but it's not worth the rebasing effort until after review (and possibly not even then, since we'll squash down to a single commit to land). * Part 2: Maintain entids separately from idents. In order to support historical idents, we need to distinguish the "current" map from entid -> ident from the "complete historical" map ident -> entid. This is what Datomic does; in Datomic, an ident is never retracted (although it can be replaced). This approach is an important part of allowing multiple consumers to share a schema fragment as it migrates forward. This fixes a limitation of the Clojure implementation, which did not handle historical idents across knowledge base close and re-open. The "entids" materialized view is naturally a slice of the "datoms" table. The "idents" materialized view is a slice of the "transactions" table. I hope that representing in this way, and casting the problem in this light, might generalize to future materialized views. * Pre: Add DiffSet. * Part 4: Collect mutations to a `Schema`. I haven't taken your review comment about consuming AttributeBuilder during each fluent function. If you read my response and still want this, I'm happy to do it in review. * Part 5: Handle :db/ident and :db.{install,alter}/attribute. This "loops" the committed datoms out of the SQL store and back through the metadata (schema, but in future also partition map) processor. The metadata processor updates the schema and produces a report of what changed; that report is then used to update the SQL store. That update includes: - the materialized views ("entids", "idents", and "schema"); - if needed, a subset of the datoms themselves (as flags change). I've left a TODO for handling attribute retraction in the cases that it makes sense. I expect that to be straight-forward. * Review comment: Rename DiffSet to AddRetractAlterSet. Also adds a little more commentary and a simple test. * Review comment: Use ToIdent trait. * Review comment: partially revert "Part 2: Maintain entids separately from idents." This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401. Following our discussion, this removes the "entids" materialized view. The next commit will remove historical idents from the "idents" materialized view. * Post: Use custom Either rather than std::result::Result. This is not necessary, but it was suggested that we might be paying an overhead creating Err instances while using error_chain. That seems not to be the case, but this change shows that we don't actually use any of the Result helper methods, so there's no reason to overload Result. This change might avoid some future confusion, so I'm going to land it anyway. Signed-off-by: Nick Alexander <nalexander@mozilla.com> * Review comment: Don't preserve historical idents. * Review comment: More prepared statements when updating materialized views. * Post: Test altering :db/cardinality and :db/unique. These tests fail due to a Datomic limitation, namely that the marker flag :db.alter/attribute can only be asserted once for an attribute! That is, [:db.part/db :db.alter/attribute :attribute] will only be transacted at most once. Since older versions of Datomic required the :db.alter/attribute flag, I can only imagine they either never wrote :db.alter/attribute to the store, or they handled it specially. I'll need to remove the marker flag system from Mentat in order to address this fundamental limitation. * Post: Remove some more single quotes from error output. * Post: Add assert_transact! macro to unwrap safely. I was finding it very difficult to track unwrapping errors while making changes, due to an underlying Mac OS X symbolication issue that makes running tests with RUST_BACKTRACE=1 so slow that they all time out. * Post: Don't expect or recognize :db.{install,alter}/attribute. I had this all working... except we will never see a repeated `[:db.part/db :db.alter/attribute :attribute]` assertion in the store! That means my approach would let you alter an attribute at most one time. It's not worth hacking around this; it's better to just stop expecting (and recognizing) the marker flags. (We have all the data to distinguish the various cases that we need without the marker flags.) This brings Mentat in line with the thrust of newer Datomic versions, but isn't compatible with Datomic, because (if I understand correctly) Datomic automatically adds :db.{install,alter}/attribute assertions to transactions. I haven't purged the corresponding :db/ident and schema fragments just yet: - we might want them back - we might want them in order to upgrade v1 and v2 databases to the new on-disk layout we're fleshing out (v3?). * Post: Don't make :db/unique :db.unique/* imply :db/index true. This patch avoids a potential bug with the "schema" materialized view. If :db/unique :db.unique/value implies :db/index true, then what happens when you _retract_ :db.unique/value? I think Datomic defines this in some way, but I really want the "schema" materialized view to be a slice of "datoms" and not have these sort of ambiguities and persistent effects. Therefore, to ensure that we don't retract a schema characteristic and accidentally change more than we intended to, this patch stops having any schema characteristic imply any other schema characteristic(s). To achieve that, I added an Option<Unique::{Value,Identity}> type to Attribute; this helps with this patch, and also looks ahead to when we allow to retract :db/unique attributes. * Post: Allow to retract :db/ident. * Post: Include more details about invalid schema changes. The tests use strings, so they hide the chained errors which do in fact provide more detail. * Review comment: Fix outdated comment. * Review comment: s/_SET/_SQL_LIST/. * Review comment: Use a sub-select for checking cardinality. This might be faster in practice. * Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
Ok(schema)
}
}
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341) * Pre: Drop unneeded tx0 from search results. * Pre: Don't require a schema in some of the DB code. The idea is to separate the transaction applying code, which is schema-aware, from the concrete storage code, which is just concerned with getting bits onto disk. * Pre: Only reference Schema, not DB, in debug module. This is part of a larger separation of the volatile PartitionMap, which is modified every transaction, from the stable Schema, which is infrequently modified. * Pre: Fix indentation. * Extract part of DB to new SchemaTypeChecking trait. * Extract part of DB to new PartitionMapping trait. * Pre: Don't expect :db.part/tx partition to advance when tx fails. This fails right now, because we allocate tx IDs even when we shouldn't. * Sketch a db interface without DB. * Add ValueParseError; use error-chain in tx-parser. This can be simplified when https://github.com/Marwes/combine/issues/86 makes it to a published release, but this unblocks us for now. This converts the `combine` error type `ParseError<&'a [edn::Value]>` to a type with owned `Vec<edn::Value>` collections, re-using `edn::Value::Vector` for making them `Display`. * Pre: Accept Borrow<Schema> instead of just &Schema in debug module. This makes it easy to use Rc<Schema> or Arc<Schema> without inserting &* sigils throughout the code. * Use error-chain in query-parser. There are a few things to point out here: - the fine grained error types have been flattened into one crate-wide error type; it's pretty easy to regain the granularity as needed. - edn::ParseError is automatically lifted to mentat_query_parser::errors::Error; - we use mentat_parser_utils::ValueParser to maintain parsing error information from `combine`. * Patch up top-level. * Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
pub trait SchemaTypeChecking {
/// Do schema-aware typechecking and coercion.
///
/// Either assert that the given value is in the value type's value set, or (in limited cases)
/// coerce the given value into the value type's value set.
fn to_typed_value(&self, value: &edn::Value, value_type: ValueType) -> Result<TypedValue>;
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341) * Pre: Drop unneeded tx0 from search results. * Pre: Don't require a schema in some of the DB code. The idea is to separate the transaction applying code, which is schema-aware, from the concrete storage code, which is just concerned with getting bits onto disk. * Pre: Only reference Schema, not DB, in debug module. This is part of a larger separation of the volatile PartitionMap, which is modified every transaction, from the stable Schema, which is infrequently modified. * Pre: Fix indentation. * Extract part of DB to new SchemaTypeChecking trait. * Extract part of DB to new PartitionMapping trait. * Pre: Don't expect :db.part/tx partition to advance when tx fails. This fails right now, because we allocate tx IDs even when we shouldn't. * Sketch a db interface without DB. * Add ValueParseError; use error-chain in tx-parser. This can be simplified when https://github.com/Marwes/combine/issues/86 makes it to a published release, but this unblocks us for now. This converts the `combine` error type `ParseError<&'a [edn::Value]>` to a type with owned `Vec<edn::Value>` collections, re-using `edn::Value::Vector` for making them `Display`. * Pre: Accept Borrow<Schema> instead of just &Schema in debug module. This makes it easy to use Rc<Schema> or Arc<Schema> without inserting &* sigils throughout the code. * Use error-chain in query-parser. There are a few things to point out here: - the fine grained error types have been flattened into one crate-wide error type; it's pretty easy to regain the granularity as needed. - edn::ParseError is automatically lifted to mentat_query_parser::errors::Error; - we use mentat_parser_utils::ValueParser to maintain parsing error information from `combine`. * Patch up top-level. * Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
}
impl SchemaTypeChecking for Schema {
fn to_typed_value(&self, value: &edn::Value, value_type: ValueType) -> Result<TypedValue> {
// TODO: encapsulate entid-ident-attribute for better error messages, perhaps by including
// the attribute (rather than just the attribute's value type) into this function or a
// wrapper function.
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341) * Pre: Drop unneeded tx0 from search results. * Pre: Don't require a schema in some of the DB code. The idea is to separate the transaction applying code, which is schema-aware, from the concrete storage code, which is just concerned with getting bits onto disk. * Pre: Only reference Schema, not DB, in debug module. This is part of a larger separation of the volatile PartitionMap, which is modified every transaction, from the stable Schema, which is infrequently modified. * Pre: Fix indentation. * Extract part of DB to new SchemaTypeChecking trait. * Extract part of DB to new PartitionMapping trait. * Pre: Don't expect :db.part/tx partition to advance when tx fails. This fails right now, because we allocate tx IDs even when we shouldn't. * Sketch a db interface without DB. * Add ValueParseError; use error-chain in tx-parser. This can be simplified when https://github.com/Marwes/combine/issues/86 makes it to a published release, but this unblocks us for now. This converts the `combine` error type `ParseError<&'a [edn::Value]>` to a type with owned `Vec<edn::Value>` collections, re-using `edn::Value::Vector` for making them `Display`. * Pre: Accept Borrow<Schema> instead of just &Schema in debug module. This makes it easy to use Rc<Schema> or Arc<Schema> without inserting &* sigils throughout the code. * Use error-chain in query-parser. There are a few things to point out here: - the fine grained error types have been flattened into one crate-wide error type; it's pretty easy to regain the granularity as needed. - edn::ParseError is automatically lifted to mentat_query_parser::errors::Error; - we use mentat_parser_utils::ValueParser to maintain parsing error information from `combine`. * Patch up top-level. * Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
match TypedValue::from_edn_value(value) {
// We don't recognize this EDN at all. Get out!
None => bail!(ErrorKind::BadEDNValuePair(value.clone(), value_type)),
Some(typed_value) => match (value_type, typed_value) {
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341) * Pre: Drop unneeded tx0 from search results. * Pre: Don't require a schema in some of the DB code. The idea is to separate the transaction applying code, which is schema-aware, from the concrete storage code, which is just concerned with getting bits onto disk. * Pre: Only reference Schema, not DB, in debug module. This is part of a larger separation of the volatile PartitionMap, which is modified every transaction, from the stable Schema, which is infrequently modified. * Pre: Fix indentation. * Extract part of DB to new SchemaTypeChecking trait. * Extract part of DB to new PartitionMapping trait. * Pre: Don't expect :db.part/tx partition to advance when tx fails. This fails right now, because we allocate tx IDs even when we shouldn't. * Sketch a db interface without DB. * Add ValueParseError; use error-chain in tx-parser. This can be simplified when https://github.com/Marwes/combine/issues/86 makes it to a published release, but this unblocks us for now. This converts the `combine` error type `ParseError<&'a [edn::Value]>` to a type with owned `Vec<edn::Value>` collections, re-using `edn::Value::Vector` for making them `Display`. * Pre: Accept Borrow<Schema> instead of just &Schema in debug module. This makes it easy to use Rc<Schema> or Arc<Schema> without inserting &* sigils throughout the code. * Use error-chain in query-parser. There are a few things to point out here: - the fine grained error types have been flattened into one crate-wide error type; it's pretty easy to regain the granularity as needed. - edn::ParseError is automatically lifted to mentat_query_parser::errors::Error; - we use mentat_parser_utils::ValueParser to maintain parsing error information from `combine`. * Patch up top-level. * Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
// Most types don't coerce at all.
(ValueType::Boolean, tv @ TypedValue::Boolean(_)) => Ok(tv),
(ValueType::Long, tv @ TypedValue::Long(_)) => Ok(tv),
(ValueType::Double, tv @ TypedValue::Double(_)) => Ok(tv),
(ValueType::String, tv @ TypedValue::String(_)) => Ok(tv),
(ValueType::Uuid, tv @ TypedValue::Uuid(_)) => Ok(tv),
(ValueType::Instant, tv @ TypedValue::Instant(_)) => Ok(tv),
(ValueType::Keyword, tv @ TypedValue::Keyword(_)) => Ok(tv),
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341) * Pre: Drop unneeded tx0 from search results. * Pre: Don't require a schema in some of the DB code. The idea is to separate the transaction applying code, which is schema-aware, from the concrete storage code, which is just concerned with getting bits onto disk. * Pre: Only reference Schema, not DB, in debug module. This is part of a larger separation of the volatile PartitionMap, which is modified every transaction, from the stable Schema, which is infrequently modified. * Pre: Fix indentation. * Extract part of DB to new SchemaTypeChecking trait. * Extract part of DB to new PartitionMapping trait. * Pre: Don't expect :db.part/tx partition to advance when tx fails. This fails right now, because we allocate tx IDs even when we shouldn't. * Sketch a db interface without DB. * Add ValueParseError; use error-chain in tx-parser. This can be simplified when https://github.com/Marwes/combine/issues/86 makes it to a published release, but this unblocks us for now. This converts the `combine` error type `ParseError<&'a [edn::Value]>` to a type with owned `Vec<edn::Value>` collections, re-using `edn::Value::Vector` for making them `Display`. * Pre: Accept Borrow<Schema> instead of just &Schema in debug module. This makes it easy to use Rc<Schema> or Arc<Schema> without inserting &* sigils throughout the code. * Use error-chain in query-parser. There are a few things to point out here: - the fine grained error types have been flattened into one crate-wide error type; it's pretty easy to regain the granularity as needed. - edn::ParseError is automatically lifted to mentat_query_parser::errors::Error; - we use mentat_parser_utils::ValueParser to maintain parsing error information from `combine`. * Patch up top-level. * Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
// Ref coerces a little: we interpret some things depending on the schema as a Ref.
(ValueType::Ref, TypedValue::Long(x)) => Ok(TypedValue::Ref(x)),
(ValueType::Ref, TypedValue::Keyword(ref x)) => self.require_entid(&x).map(|entid| entid.into()),
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341) * Pre: Drop unneeded tx0 from search results. * Pre: Don't require a schema in some of the DB code. The idea is to separate the transaction applying code, which is schema-aware, from the concrete storage code, which is just concerned with getting bits onto disk. * Pre: Only reference Schema, not DB, in debug module. This is part of a larger separation of the volatile PartitionMap, which is modified every transaction, from the stable Schema, which is infrequently modified. * Pre: Fix indentation. * Extract part of DB to new SchemaTypeChecking trait. * Extract part of DB to new PartitionMapping trait. * Pre: Don't expect :db.part/tx partition to advance when tx fails. This fails right now, because we allocate tx IDs even when we shouldn't. * Sketch a db interface without DB. * Add ValueParseError; use error-chain in tx-parser. This can be simplified when https://github.com/Marwes/combine/issues/86 makes it to a published release, but this unblocks us for now. This converts the `combine` error type `ParseError<&'a [edn::Value]>` to a type with owned `Vec<edn::Value>` collections, re-using `edn::Value::Vector` for making them `Display`. * Pre: Accept Borrow<Schema> instead of just &Schema in debug module. This makes it easy to use Rc<Schema> or Arc<Schema> without inserting &* sigils throughout the code. * Use error-chain in query-parser. There are a few things to point out here: - the fine grained error types have been flattened into one crate-wide error type; it's pretty easy to regain the granularity as needed. - edn::ParseError is automatically lifted to mentat_query_parser::errors::Error; - we use mentat_parser_utils::ValueParser to maintain parsing error information from `combine`. * Patch up top-level. * Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
// Otherwise, we have a type mismatch.
// Enumerate all of the types here to allow the compiler to help us.
// We don't enumerate all `TypedValue` cases, though: that would multiply this
// collection by 8!
(vt @ ValueType::Boolean, _) |
(vt @ ValueType::Long, _) |
(vt @ ValueType::Double, _) |
(vt @ ValueType::String, _) |
(vt @ ValueType::Uuid, _) |
(vt @ ValueType::Instant, _) |
(vt @ ValueType::Keyword, _) |
(vt @ ValueType::Ref, _)
=> bail!(ErrorKind::BadEDNValuePair(value.clone(), vt)),
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341) * Pre: Drop unneeded tx0 from search results. * Pre: Don't require a schema in some of the DB code. The idea is to separate the transaction applying code, which is schema-aware, from the concrete storage code, which is just concerned with getting bits onto disk. * Pre: Only reference Schema, not DB, in debug module. This is part of a larger separation of the volatile PartitionMap, which is modified every transaction, from the stable Schema, which is infrequently modified. * Pre: Fix indentation. * Extract part of DB to new SchemaTypeChecking trait. * Extract part of DB to new PartitionMapping trait. * Pre: Don't expect :db.part/tx partition to advance when tx fails. This fails right now, because we allocate tx IDs even when we shouldn't. * Sketch a db interface without DB. * Add ValueParseError; use error-chain in tx-parser. This can be simplified when https://github.com/Marwes/combine/issues/86 makes it to a published release, but this unblocks us for now. This converts the `combine` error type `ParseError<&'a [edn::Value]>` to a type with owned `Vec<edn::Value>` collections, re-using `edn::Value::Vector` for making them `Display`. * Pre: Accept Borrow<Schema> instead of just &Schema in debug module. This makes it easy to use Rc<Schema> or Arc<Schema> without inserting &* sigils throughout the code. * Use error-chain in query-parser. There are a few things to point out here: - the fine grained error types have been flattened into one crate-wide error type; it's pretty easy to regain the granularity as needed. - edn::ParseError is automatically lifted to mentat_query_parser::errors::Error; - we use mentat_parser_utils::ValueParser to maintain parsing error information from `combine`. * Patch up top-level. * Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
}
}
}
}
#[cfg(test)]
mod test {
use super::*;
use self::edn::NamespacedKeyword;
use errors::Error;
fn add_attribute(schema: &mut Schema,
ident: NamespacedKeyword,
entid: Entid,
attribute: Attribute) {
schema.entid_map.insert(entid, ident.clone());
schema.ident_map.insert(ident.clone(), entid);
if attribute.component {
schema.component_attributes.push(entid);
}
schema.attribute_map.insert(entid, attribute);
}
#[test]
fn validate_attribute_map_success() {
let mut schema = Schema::default();
// attribute that is not an index has no uniqueness
add_attribute(&mut schema, NamespacedKeyword::new("foo", "bar"), 97, Attribute {
index: false,
value_type: ValueType::Boolean,
fulltext: false,
unique: None,
multival: false,
component: false,
no_history: false,
});
// attribute is unique by value and an index
add_attribute(&mut schema, NamespacedKeyword::new("foo", "baz"), 98, Attribute {
index: true,
value_type: ValueType::Long,
fulltext: false,
unique: Some(attribute::Unique::Value),
multival: false,
component: false,
no_history: false,
});
// attribue is unique by identity and an index
add_attribute(&mut schema, NamespacedKeyword::new("foo", "bat"), 99, Attribute {
index: true,
value_type: ValueType::Ref,
fulltext: false,
unique: Some(attribute::Unique::Identity),
multival: false,
component: false,
no_history: false,
});
// attribute is a components and a `Ref`
add_attribute(&mut schema, NamespacedKeyword::new("foo", "bak"), 100, Attribute {
index: false,
value_type: ValueType::Ref,
fulltext: false,
unique: None,
multival: false,
component: true,
no_history: false,
});
// fulltext attribute is a string and an index
add_attribute(&mut schema, NamespacedKeyword::new("foo", "bap"), 101, Attribute {
index: true,
value_type: ValueType::String,
fulltext: true,
unique: None,
multival: false,
component: false,
no_history: false,
});
assert!(validate_attribute_map(&schema.entid_map, &schema.attribute_map).is_ok());
}
#[test]
fn invalid_schema_unique_value_not_index() {
let mut schema = Schema::default();
// attribute unique by value but not index
let ident = NamespacedKeyword::new("foo", "bar");
add_attribute(&mut schema, ident , 99, Attribute {
index: false,
value_type: ValueType::Boolean,
fulltext: false,
unique: Some(attribute::Unique::Value),
multival: false,
component: false,
no_history: false,
});
let err = validate_attribute_map(&schema.entid_map, &schema.attribute_map).err();
assert!(err.is_some());
match err.unwrap() {
Error(ErrorKind::BadSchemaAssertion(message), _) => { assert_eq!(message, ":db/unique :db/unique_value without :db/index true for entid: :foo/bar"); },
x => panic!("expected Bad Schema Assertion error, got {:?}", x),
}
}
#[test]
fn invalid_schema_unique_identity_not_index() {
let mut schema = Schema::default();
// attribute is unique by identity but not index
add_attribute(&mut schema, NamespacedKeyword::new("foo", "bar"), 99, Attribute {
index: false,
value_type: ValueType::Long,
fulltext: false,
unique: Some(attribute::Unique::Identity),
multival: false,
component: false,
no_history: false,
});
let err = validate_attribute_map(&schema.entid_map, &schema.attribute_map).err();
assert!(err.is_some());
match err.unwrap() {
Error(ErrorKind::BadSchemaAssertion(message), _) => { assert_eq!(message, ":db/unique :db/unique_identity without :db/index true for entid: :foo/bar"); },
x => panic!("expected Bad Schema Assertion error, got {:?}", x),
}
}
#[test]
fn invalid_schema_component_not_ref() {
let mut schema = Schema::default();
// attribute that is a component is not a `Ref`
add_attribute(&mut schema, NamespacedKeyword::new("foo", "bar"), 99, Attribute {
index: false,
value_type: ValueType::Boolean,
fulltext: false,
unique: None,
multival: false,
component: true,
no_history: false,
});
let err = validate_attribute_map(&schema.entid_map, &schema.attribute_map).err();
assert!(err.is_some());
match err.unwrap() {
Error(ErrorKind::BadSchemaAssertion(message), _) => { assert_eq!(message, ":db/isComponent true without :db/valueType :db.type/ref for entid: :foo/bar"); },
x => panic!("expected Bad Schema Assertion error, got {:?}", x),
}
}
#[test]
fn invalid_schema_fulltext_not_index() {
let mut schema = Schema::default();
// attribute that is fulltext is not an index
add_attribute(&mut schema, NamespacedKeyword::new("foo", "bar"), 99, Attribute {
index: false,
value_type: ValueType::String,
fulltext: true,
unique: None,
multival: false,
component: false,
no_history: false,
});
let err = validate_attribute_map(&schema.entid_map, &schema.attribute_map).err();
assert!(err.is_some());
match err.unwrap() {
Error(ErrorKind::BadSchemaAssertion(message), _) => { assert_eq!(message, ":db/fulltext true without :db/index true for entid: :foo/bar"); },
x => panic!("expected Bad Schema Assertion error, got {:?}", x),
}
}
fn invalid_schema_fulltext_index_not_string() {
let mut schema = Schema::default();
// attribute that is fulltext and not a `String`
add_attribute(&mut schema, NamespacedKeyword::new("foo", "bar"), 99, Attribute {
index: true,
value_type: ValueType::Long,
fulltext: true,
unique: None,
multival: false,
component: false,
no_history: false,
});
let err = validate_attribute_map(&schema.entid_map, &schema.attribute_map).err();
assert!(err.is_some());
match err.unwrap() {
Error(ErrorKind::BadSchemaAssertion(message), _) => { assert_eq!(message, ":db/fulltext true without :db/valueType :db.type/string for entid: :foo/bar"); },
x => panic!("expected Bad Schema Assertion error, got {:?}", x),
}
}
}