This commit adds a check to the partition map that a provided entity ID
has been mentioned (i.e., is present in the start:index range of one of
our partitions).
We introduce a newtype for known entity IDs, using this internally in
the tx expander to track user-provided entids that have passed the above
check (and IDs that we allocate as part of tempid processing). This
newtype is stripped prior to tx assertion.
In order that DB tests can continue to write
[:db/add 111 :foo/bar 222]
we add an additional fake partition to our test connections, ranging
from 100 to 1000.
This is an optimization that trades rejecting inputs earlier at the
cost of expressive error messages. It should be possible to recover
the error messages, however.
This will reject input like `[:db/{add,retract} v :attribute/_reversed NOT-AN-ENTITY]`.
There are two broad approaches:
1) Handle reverse attribute notation dynamically, in the style that
Datomic does. This is the most flexible, but it's not a good fit
given that we produce strongly typed output from the parser.
Strongly typed input to the transactor has had many benefits, so I
don't want to roll it back for a relatively unimportant feature
like reverse notation -- especially not since Mentat does not
require :db.install/_attribute to modify schema attributes.
2) Handle reverse attribute in the parser itself, so that we can
produce strongly typed parser output while restricting the input.
I implemented this first and discovered that it's very difficult to
give sensible error messages in common cases.
In any case, the bulk of the code is the same between the two
approaches, and I wrote the tests for the dynamic version (with error
output), so that's what I'm rolling with.
This patch preserves the existing indentation, to highlight the
differences. The next patch will indent.
This isn't perfect -- we still need to clone in a couple of cases -- but it avoids us
passing duplicate strings down into SQLite whenever the same value is mentioned more
than once in a query.
This is a big commit, but it breaks into two conceptual pieces. The
first is to "parse without copying". We replace a stream of an owned
collection of edn::ValueAndSpan and instead have a stream of a
borrowed collection of &edn::ValueAndSpan references. (Generally,
this is represented as an iterator over a slice, but it can be over
other things too.) Cloning such iterators is constant time, which
improves on cloning an owned collection of edn::ValueAndSpan, which is
linear time in the length of the collection and additional time
depending on the complexity of the EDN values.
The second conceptual piece is to parse keyword maps using a special
parser and a macro to build the parser implementations. Before, we
created a new edn::ValueAndSpan::Map to represent a keyword map in
vector form; since we're working with &edn::ValueAndSpan references
now, we can't create an &edn::ValueAndSpan reference with an
appropriate lifetime. Therefore we generalize the concept of
iteration slightly and turn keyword maps in map form into linear
iterators by flattening the value maps. This is a potentially
obscuring transformation, so we have to take care to protect against
some failure cases. (See the comments and the tests in the code.)
After these changes, parsing using `combine` is linear time (and
reasonably fast).
This doesn't yet introduce a working Cargo.toml for 'mentatweb', but it
does allow RLS to build correctly without errors, and it reduces the
core library's dependency space, which is more important in the short
term.
* Pre: unused import in translate.rs.
* Part 2: take a dependency on rusqlite for query arguments.
* Part 1: flatten V2 schema into V1. Add UUID and URI.
Bump expected ident and bootstrap datom count in tests.
* Part 5: parse edn::Value::Uuid.
* Part 3: extend ValueType and TypedValue to include Uuid.
* Part 4: add Uuid to query arguments.
* Part 6: extend db to support Uuid.
* Part 8: add a tx-parser test for #f NaN and #uuid.
* Part 7: parse and algebrize UUIDs in queries.
* Part 1: parse #inst in EDN and throughout query engine.
* Part 3: handle instants in db.
* Part 2: instants never matches integers in queries.
* Part 4: use DateTime for tx_instants.
* Add a test for adding and querying UUIDs and instants.
* Review comments.
* Part 1 - Parse `not` and `not-join`
* Part 2 - Validate `not` and `not-join` pre-algebrization
* Address review comments rnewman.
* Remove `WhereNotClause` and populate `NotJoin` with `WhereClause`.
* Fix validation for `not` and `not-join`, removing tests that were invalid.
* Address rustification comments.
* Rebase against `rust` branch.
* Part 3 - Add required types for NotJoin.
* Implement `PartialEq` for
`ConjoiningClauses` so `ComputedTable` can be included inside `ColumnConstraint::NotExists`
* Part 4 - Implement `apply_not_join`
* Part 5 - Call `apply_not_join` from inside `apply_clause`
* Part 6 - Translate `not-join` into `NOT EXISTS` SQL
* Address review comments.
* Rename `projected` to `unified` to better describe the fact that we are not projecting any variables.
* Check for presence of each unified var in either `column_bindings` or `input_bindings` and bail if not there.
* Copy over `input_bindings` for each var in `unified`.
* Only copy over the first `column_binding` for each variable in `unified` rather than the whole list.
* Update tests.
* Address review comments.
* Make output from Debug for NotExists more useful
* Clear up misunderstanding. Any single failing clause in the not will cause the entire not to be considered empty
* Address review comments.
* Remove Limit requirement from cc_to_exists.
* Use Entry.or_insert instead of matching on the entry to add to column_bindings.
* Move addition of value_bindings to before apply_clauses on template.
* Tidy up tests with some variable reuse.
* Addressed nits,
* Address review comments.
* Move addition of column_bindings to above apply_clause.
* Update tests.
* Add test to ensure that unbound vars fail
* Improve test for unbound variable to check for correct variable and error
* address nits
* Part 1: define ValueTypeSet.
We're going to use this instead of `HashSet<ValueType>` so that we can clearly express
the empty set and the set of all types, and also to encapsulate a switch to `EnumSet`."
* Part 2: use ValueTypeSet.
* Part 3: fix type expansion.
* Part 4: add a test for type extraction from nested `or`.
* Review comments.
* Review comments: simplify ValueTypeSet.
* Pre: put query parts in alphabetical order.
* Pre: rename 'input' to 'query' in translate tests.
* Part 1: parse :limit.
* Part 2: validate and escape variable parameters in SQL.
* Part 3: algebrize and translate limits.
This is for two reasons.
Firstly, we need to track the types of inputs, their values, and also
the input variables; adding a struct gives us a little more clarity.
Secondly, when we come to implement prepared statements, we'll be
algebrizing queries without having the values available. We'll be able
to do a better job of algebrizing, and also do more validating, if we
allow callers to specify the types of variables in advance, even if the
values aren't known.
We also at this point switch from using `Vec<Variable>` to
`BTreeSet<Variable>`. This allows us to guarantee no duplicates later;
we'll reject duplicates at parse time.
This adds an `:order` keyword to `:find`.
If present, the results of the query will be an ordered set, rather than
an unordered set; rows will appear in an ordered defined by each
`:order` entry.
Each can be one of three things:
- A var, `?x`, meaning "order by ?x ascending".
- A pair, `(asc ?x)`, meaning "order by ?x ascending".
- A pair, `(desc ?x)`, meaning "order by ?x descending".
Values will be ordered in this sequence for asc, and in reverse for desc:
1. Entity IDs, in ascending numerical order.
2. Booleans, false then true.
3. Timestamps, in ascending numerical order.
4. Longs and doubles, intermixed, in ascending numerical order.
5. Strings, in ascending lexicographic order.
6. Keywords, in ascending lexicographic order, considering the entire
ns/name pair as a single string separated by '/'.
Subcommits:
Pre: make bound_value public.
Pre: generalize ErrorKind::UnboundVariable for use in order.
Part 1: parse (direction, var) pairs.
Part 2: parse :order clause into FindQuery.
Part 3: include order variables in algebrized query.
We add order variables to :with, so we can reuse its type tag projection
logic, and so that we can phrase ordering in terms of variables rather
than datoms columns.
Part 4: produce SQL for order clauses.
* Pre: refactor projector code.
* Part 1: maintain 'with' variables in AlgebrizedQuery.
* Part 2: include necessary 'with' variables in SQL projection list.
The test produces projection elements for `:with`, even though there are
no aggregates in the query. This test will need to be adjusted when we
optimize this away!
This commit turns complex `or` -- `or`s in which not all variables are
unified, or in which not all arms are the same shape -- into a
computed table.
We do this by building a template CC that shares some state with the
destination CC, applying each arm of the `or` to a copy of the template
as if it were a standalone query, then building a projection list and
creating a `ComputedTable::Union`. This is pushed into the destination
CC's `computed_tables` list.
Finally, the variables projected from the UNION are bound in the
destination CC, so that unification occurs, and projection of the
outermost query can use bindings established by the `or-join`.
This commit includes projection of type codes from heterogeneous `UNION`
arms: we compute a list of variables for which a definite type is
unknown in at least one arm, and force all arms to project either a type
tag column or a fixed type. It's important that each branch of a UNION
project the same columns in the same order, hence the projection of
fixed values.
The translator is similarly extended to project the type tag column name
or the known value_type_tag to support this.
Review comment: clarify union type extraction.
