xv6/mmu.h
2006-06-12 15:22:12 +00:00

308 lines
11 KiB
C

/*
* This file contains definitions for the x86 memory management unit (MMU),
* including paging- and segmentation-related data structures and constants,
* the %cr0, %cr4, and %eflags registers, and traps.
*/
/*
*
* Part 1. Paging data structures and constants.
*
*/
// A linear address 'la' has a three-part structure as follows:
//
// +--------10------+-------10-------+---------12----------+
// | Page Directory | Page Table | Offset within Page |
// | Index | Index | |
// +----------------+----------------+---------------------+
// \--- PDX(la) --/ \--- PTX(la) --/ \---- PGOFF(la) ----/
// \----------- PPN(la) -----------/
//
// The PDX, PTX, PGOFF, and PPN macros decompose linear addresses as shown.
// To construct a linear address la from PDX(la), PTX(la), and PGOFF(la),
// use PGADDR(PDX(la), PTX(la), PGOFF(la)).
// page number field of address
#define PPN(la) (((uintptr_t) (la)) >> PTXSHIFT)
#define VPN(la) PPN(la) // used to index into vpt[]
// page directory index
#define PDX(la) ((((uintptr_t) (la)) >> PDXSHIFT) & 0x3FF)
#define VPD(la) PDX(la) // used to index into vpd[]
// page table index
#define PTX(la) ((((uintptr_t) (la)) >> PTXSHIFT) & 0x3FF)
// offset in page
#define PGOFF(la) (((uintptr_t) (la)) & 0xFFF)
// construct linear address from indexes and offset
#define PGADDR(d, t, o) ((void*) ((d) << PDXSHIFT | (t) << PTXSHIFT | (o)))
// Page directory and page table constants.
#define NPDENTRIES 1024 // page directory entries per page directory
#define NPTENTRIES 1024 // page table entries per page table
#define PGSIZE 4096 // bytes mapped by a page
#define PGSHIFT 12 // log2(PGSIZE)
#define PTSIZE (PGSIZE*NPTENTRIES) // bytes mapped by a page directory entry
#define PTSHIFT 22 // log2(PTSIZE)
#define PTXSHIFT 12 // offset of PTX in a linear address
#define PDXSHIFT 22 // offset of PDX in a linear address
// Page table/directory entry flags.
#define PTE_P 0x001 // Present
#define PTE_W 0x002 // Writeable
#define PTE_U 0x004 // User
#define PTE_PWT 0x008 // Write-Through
#define PTE_PCD 0x010 // Cache-Disable
#define PTE_A 0x020 // Accessed
#define PTE_D 0x040 // Dirty
#define PTE_PS 0x080 // Page Size
#define PTE_MBZ 0x180 // Bits must be zero
// The PTE_AVAIL bits aren't used by the kernel or interpreted by the
// hardware, so user processes are allowed to set them arbitrarily.
#define PTE_AVAIL 0xE00 // Available for software use
// Only flags in PTE_USER may be used in system calls.
#define PTE_USER (PTE_AVAIL | PTE_P | PTE_W | PTE_U)
// address in page table entry
#define PTE_ADDR(pte) ((physaddr_t) (pte) & ~0xFFF)
// Control Register flags
#define CR0_PE 0x00000001 // Protection Enable
#define CR0_MP 0x00000002 // Monitor coProcessor
#define CR0_EM 0x00000004 // Emulation
#define CR0_TS 0x00000008 // Task Switched
#define CR0_ET 0x00000010 // Extension Type
#define CR0_NE 0x00000020 // Numeric Errror
#define CR0_WP 0x00010000 // Write Protect
#define CR0_AM 0x00040000 // Alignment Mask
#define CR0_NW 0x20000000 // Not Writethrough
#define CR0_CD 0x40000000 // Cache Disable
#define CR0_PG 0x80000000 // Paging
#define CR4_PCE 0x00000100 // Performance counter enable
#define CR4_MCE 0x00000040 // Machine Check Enable
#define CR4_PSE 0x00000010 // Page Size Extensions
#define CR4_DE 0x00000008 // Debugging Extensions
#define CR4_TSD 0x00000004 // Time Stamp Disable
#define CR4_PVI 0x00000002 // Protected-Mode Virtual Interrupts
#define CR4_VME 0x00000001 // V86 Mode Extensions
// Eflags register
#define FL_CF 0x00000001 // Carry Flag
#define FL_PF 0x00000004 // Parity Flag
#define FL_AF 0x00000010 // Auxiliary carry Flag
#define FL_ZF 0x00000040 // Zero Flag
#define FL_SF 0x00000080 // Sign Flag
#define FL_TF 0x00000100 // Trap Flag
#define FL_IF 0x00000200 // Interrupt Flag
#define FL_DF 0x00000400 // Direction Flag
#define FL_OF 0x00000800 // Overflow Flag
#define FL_IOPL_MASK 0x00003000 // I/O Privilege Level bitmask
#define FL_IOPL_0 0x00000000 // IOPL == 0
#define FL_IOPL_1 0x00001000 // IOPL == 1
#define FL_IOPL_2 0x00002000 // IOPL == 2
#define FL_IOPL_3 0x00003000 // IOPL == 3
#define FL_NT 0x00004000 // Nested Task
#define FL_RF 0x00010000 // Resume Flag
#define FL_VM 0x00020000 // Virtual 8086 mode
#define FL_AC 0x00040000 // Alignment Check
#define FL_VIF 0x00080000 // Virtual Interrupt Flag
#define FL_VIP 0x00100000 // Virtual Interrupt Pending
#define FL_ID 0x00200000 // ID flag
// Page fault error codes
#define FEC_PR 0x1 // Page fault caused by protection violation
#define FEC_WR 0x2 // Page fault caused by a write
#define FEC_U 0x4 // Page fault occured while in user mode
/*
*
* Part 2. Segmentation data structures and constants.
*
*/
#ifdef __ASSEMBLER__
/*
* Macros to build GDT entries in assembly.
*/
#define SEG_NULL \
.word 0, 0; \
.byte 0, 0, 0, 0
#define SEG(type,base,lim) \
.word (((lim) >> 12) & 0xffff), ((base) & 0xffff); \
.byte (((base) >> 16) & 0xff), (0x90 | (type)), \
(0xC0 | (((lim) >> 28) & 0xf)), (((base) >> 24) & 0xff)
#else // not __ASSEMBLER__
// Segment Descriptors
struct Segdesc {
unsigned sd_lim_15_0 : 16; // Low bits of segment limit
unsigned sd_base_15_0 : 16; // Low bits of segment base address
unsigned sd_base_23_16 : 8; // Middle bits of segment base address
unsigned sd_type : 4; // Segment type (see STS_ constants)
unsigned sd_s : 1; // 0 = system, 1 = application
unsigned sd_dpl : 2; // Descriptor Privilege Level
unsigned sd_p : 1; // Present
unsigned sd_lim_19_16 : 4; // High bits of segment limit
unsigned sd_avl : 1; // Unused (available for software use)
unsigned sd_rsv1 : 1; // Reserved
unsigned sd_db : 1; // 0 = 16-bit segment, 1 = 32-bit segment
unsigned sd_g : 1; // Granularity: limit scaled by 4K when set
unsigned sd_base_31_24 : 8; // High bits of segment base address
};
// Null segment
#define SEG_NULL (struct Segdesc){ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
// Segment that is loadable but faults when used
#define SEG_FAULT (struct Segdesc){ 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0 }
// Normal segment
#define SEG(type, base, lim, dpl) (struct Segdesc) \
{ ((lim) >> 12) & 0xffff, (base) & 0xffff, ((base) >> 16) & 0xff, \
type, 1, dpl, 1, (unsigned) (lim) >> 28, 0, 0, 1, 1, \
(unsigned) (base) >> 24 }
#define SEG16(type, base, lim, dpl) (struct Segdesc) \
{ (lim) & 0xffff, (base) & 0xffff, ((base) >> 16) & 0xff, \
type, 1, dpl, 1, (unsigned) (lim) >> 16, 0, 0, 1, 0, \
(unsigned) (base) >> 24 }
#endif /* !__ASSEMBLER__ */
// Application segment type bits
#define STA_X 0x8 // Executable segment
#define STA_E 0x4 // Expand down (non-executable segments)
#define STA_C 0x4 // Conforming code segment (executable only)
#define STA_W 0x2 // Writeable (non-executable segments)
#define STA_R 0x2 // Readable (executable segments)
#define STA_A 0x1 // Accessed
// System segment type bits
#define STS_T16A 0x1 // Available 16-bit TSS
#define STS_LDT 0x2 // Local Descriptor Table
#define STS_T16B 0x3 // Busy 16-bit TSS
#define STS_CG16 0x4 // 16-bit Call Gate
#define STS_TG 0x5 // Task Gate / Coum Transmitions
#define STS_IG16 0x6 // 16-bit Interrupt Gate
#define STS_TG16 0x7 // 16-bit Trap Gate
#define STS_T32A 0x9 // Available 32-bit TSS
#define STS_T32B 0xB // Busy 32-bit TSS
#define STS_CG32 0xC // 32-bit Call Gate
#define STS_IG32 0xE // 32-bit Interrupt Gate
#define STS_TG32 0xF // 32-bit Trap Gate
/*
*
* Part 3. Traps.
*
*/
#ifndef __ASSEMBLER__
// Task state segment format (as described by the Pentium architecture book)
struct Taskstate {
uint32_t ts_link; // Old ts selector
uintptr_t ts_esp0; // Stack pointers and segment selectors
uint16_t ts_ss0; // after an increase in privilege level
uint16_t ts_padding1;
uintptr_t ts_esp1;
uint16_t ts_ss1;
uint16_t ts_padding2;
uintptr_t ts_esp2;
uint16_t ts_ss2;
uint16_t ts_padding3;
physaddr_t ts_cr3; // Page directory base
uintptr_t ts_eip; // Saved state from last task switch
uint32_t ts_eflags;
uint32_t ts_eax; // More saved state (registers)
uint32_t ts_ecx;
uint32_t ts_edx;
uint32_t ts_ebx;
uintptr_t ts_esp;
uintptr_t ts_ebp;
uint32_t ts_esi;
uint32_t ts_edi;
uint16_t ts_es; // Even more saved state (segment selectors)
uint16_t ts_padding4;
uint16_t ts_cs;
uint16_t ts_padding5;
uint16_t ts_ss;
uint16_t ts_padding6;
uint16_t ts_ds;
uint16_t ts_padding7;
uint16_t ts_fs;
uint16_t ts_padding8;
uint16_t ts_gs;
uint16_t ts_padding9;
uint16_t ts_ldt;
uint16_t ts_padding10;
uint16_t ts_t; // Trap on task switch
uint16_t ts_iomb; // I/O map base address
};
// Gate descriptors for interrupts and traps
struct Gatedesc {
unsigned gd_off_15_0 : 16; // low 16 bits of offset in segment
unsigned gd_ss : 16; // segment selector
unsigned gd_args : 5; // # args, 0 for interrupt/trap gates
unsigned gd_rsv1 : 3; // reserved(should be zero I guess)
unsigned gd_type : 4; // type(STS_{TG,IG32,TG32})
unsigned gd_s : 1; // must be 0 (system)
unsigned gd_dpl : 2; // descriptor(meaning new) privilege level
unsigned gd_p : 1; // Present
unsigned gd_off_31_16 : 16; // high bits of offset in segment
};
// Set up a normal interrupt/trap gate descriptor.
// - istrap: 1 for a trap (= exception) gate, 0 for an interrupt gate.
// - sel: Code segment selector for interrupt/trap handler
// - off: Offset in code segment for interrupt/trap handler
// - dpl: Descriptor Privilege Level -
// the privilege level required for software to invoke
// this interrupt/trap gate explicitly using an int instruction.
#define SETGATE(gate, istrap, sel, off, dpl) \
{ \
(gate).gd_off_15_0 = (uint32_t) (off) & 0xffff; \
(gate).gd_ss = (sel); \
(gate).gd_args = 0; \
(gate).gd_rsv1 = 0; \
(gate).gd_type = (istrap) ? STS_TG32 : STS_IG32; \
(gate).gd_s = 0; \
(gate).gd_dpl = (dpl); \
(gate).gd_p = 1; \
(gate).gd_off_31_16 = (uint32_t) (off) >> 16; \
}
// Set up a call gate descriptor.
#define SETCALLGATE(gate, ss, off, dpl) \
{ \
(gate).gd_off_15_0 = (uint32_t) (off) & 0xffff; \
(gate).gd_ss = (ss); \
(gate).gd_args = 0; \
(gate).gd_rsv1 = 0; \
(gate).gd_type = STS_CG32; \
(gate).gd_s = 0; \
(gate).gd_dpl = (dpl); \
(gate).gd_p = 1; \
(gate).gd_off_31_16 = (uint32_t) (off) >> 16; \
}
// Pseudo-descriptors used for LGDT, LLDT and LIDT instructions.
struct Pseudodesc {
uint16_t pd__garbage; // LGDT supposed to be from address 4N+2
uint16_t pd_lim; // Limit
uint32_t pd_base __attribute__ ((packed)); // Base address
};
#define PD_ADDR(desc) (&(desc).pd_lim)
#endif /* !__ASSEMBLER__ */