2017-02-15 00:50:40 +00:00
// Copyright 2016 Mozilla
//
// Licensed under the Apache License, Version 2.0 (the "License"); you may not use
// this file except in compliance with the License. You may obtain a copy of the
// License at http://www.apache.org/licenses/LICENSE-2.0
// Unless required by applicable law or agreed to in writing, software distributed
// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.
#![ allow(dead_code) ]
//! This module implements the transaction application algorithm described at
//! https://github.com/mozilla/mentat/wiki/Transacting and its children pages.
//!
//! The implementation proceeds in four main stages, labeled "Pipeline stage 1" through "Pipeline
//! stage 4". _Pipeline_ may be a misnomer, since the stages as written **cannot** be interleaved
//! in parallel. That is, a single transacted entity cannot flow through all the stages without its
//! sibling entities.
//!
//! This unintuitive architectural decision was made because the second and third stages (resolving
//! lookup refs and tempids, respectively) operate _in bulk_ to minimize the number of expensive
//! SQLite queries by processing many in one SQLite invocation. Pipeline stage 2 doesn't need to
//! operate like this: it is easy to handle each transacted entity independently of all the others
//! (and earlier, less efficient, implementations did this). However, Pipeline stage 3 appears to
//! require processing multiple elements at the same time, since there can be arbitrarily complex
//! graph relationships between tempids. Pipeline stage 4 (inserting elements into the SQL store)
//! could also be expressed as an independent operation per transacted entity, but there are
//! non-trivial uniqueness relationships inside a single transaction that need to enforced.
//! Therefore, some multi-entity processing is required, and a per-entity pipeline becomes less
//! attractive.
//!
//! A note on the types in the implementation. The pipeline stages are strongly typed: each stage
//! accepts and produces a subset of the previous. We hope this will reduce errors as data moves
//! through the system. In contrast the Clojure implementation rewrote the fundamental entity type
//! in place and suffered bugs where particular code paths missed cases.
//!
//! The type hierarchy accepts `Entity` instances from the transaction parser and flows `Term`
//! instances through the term-rewriting transaction applier. `Term` is a general `[:db/add e a v]`
//! with restrictions on the `e` and `v` components. The hierarchy is expressed using `Result` to
//! model either/or, and layers of `Result` are stripped -- we might say the `Term` instances are
//! _lowered_ as they flow through the pipeline. This type hierarchy could have been expressed by
//! combinatorially increasing `enum` cases, but this makes it difficult to handle the `e` and `v`
//! components symmetrically. Hence, layers of `Result` type aliases. Hopefully the explanatory
//! names -- `TermWithTempIdsAndLookupRefs`, anyone? -- and strongly typed stage functions will help
//! keep everything straight.
2017-03-03 23:03:59 +00:00
use std ::borrow ::Cow ;
2017-03-20 18:34:38 +00:00
use std ::collections ::{
BTreeMap ,
BTreeSet ,
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
VecDeque ,
2017-03-20 18:34:38 +00:00
} ;
2017-06-06 19:59:54 +00:00
use std ::rc ::Rc ;
2017-02-15 00:50:40 +00:00
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
use db ;
use db ::{
MentatStoring ,
PartitionMapping ,
} ;
2017-05-08 03:00:04 +00:00
use edn ::{
NamespacedKeyword ,
} ;
2017-02-15 00:50:40 +00:00
use entids ;
2017-02-20 13:13:16 +00:00
use errors ::{ ErrorKind , Result } ;
2017-02-15 00:50:40 +00:00
use internal_types ::{
2017-05-08 03:00:04 +00:00
KnownEntid ,
KnownEntidOr ,
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
LookupRef ,
2017-02-15 00:50:40 +00:00
LookupRefOrTempId ,
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
TempIdHandle ,
2017-02-15 00:50:40 +00:00
TempIdMap ,
Term ,
TermWithTempIds ,
2017-06-06 20:18:47 +00:00
TermWithTempIdsAndLookupRefs ,
2017-02-15 00:50:40 +00:00
TermWithoutTempIds ,
2017-06-06 20:18:47 +00:00
TypedValueOr ,
2017-06-14 21:42:34 +00:00
replace_lookup_ref ,
} ;
use mentat_core ::util ::Either ;
2017-04-29 03:11:55 +00:00
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
use mentat_core ::{
2017-04-29 03:11:55 +00:00
DateTime ,
Schema ,
UTC ,
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
attribute ,
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
intern_set ,
} ;
2017-02-15 00:50:40 +00:00
use mentat_tx ::entities as entmod ;
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
use mentat_tx ::entities ::{
Entity ,
OpType ,
TempId ,
} ;
use mentat_tx_parser ;
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
use metadata ;
2017-02-15 00:50:40 +00:00
use rusqlite ;
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
use schema ::{
SchemaBuilding ,
SchemaTypeChecking ,
} ;
2017-02-20 13:13:16 +00:00
use types ::{
Attribute ,
AVPair ,
AVMap ,
Entid ,
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
PartitionMap ,
2017-02-20 13:13:16 +00:00
TypedValue ,
TxReport ,
ValueType ,
} ;
2017-02-15 00:50:40 +00:00
use upsert_resolution ::Generation ;
/// A transaction on its way to being applied.
#[ derive(Debug) ]
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
pub struct Tx < ' conn , ' a > {
/// The storage to apply against. In the future, this will be a Mentat connection.
store : & ' conn rusqlite ::Connection , // TODO: db::MentatStoring,
/// The partition map to allocate entids from.
///
/// The partition map is volatile in the sense that every succesful transaction updates
/// allocates at least one tx ID, so we own and modify our own partition map.
partition_map : PartitionMap ,
2017-02-15 00:50:40 +00:00
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
/// The schema to update from the transaction entities.
///
/// Transactions only update the schema infrequently, so we borrow this schema until we need to
/// modify it.
schema_for_mutation : Cow < ' a , Schema > ,
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
/// The schema to use when interpreting the transaction entities.
///
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
/// This schema is not updated, so we just borrow it.
schema : & ' a Schema ,
2017-02-15 00:50:40 +00:00
/// The transaction ID of the transaction.
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
tx_id : Entid ,
2017-02-15 00:50:40 +00:00
/// The timestamp when the transaction began to be committed.
2017-04-29 03:11:55 +00:00
tx_instant : DateTime < UTC > ,
2017-02-15 00:50:40 +00:00
}
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
impl < ' conn , ' a > Tx < ' conn , ' a > {
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
pub fn new (
store : & ' conn rusqlite ::Connection ,
partition_map : PartitionMap ,
schema_for_mutation : & ' a Schema ,
schema : & ' a Schema ,
tx_id : Entid ,
2017-04-29 03:11:55 +00:00
tx_instant : DateTime < UTC > ) -> Tx < ' conn , ' a > {
2017-02-15 00:50:40 +00:00
Tx {
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
store : store ,
partition_map : partition_map ,
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
schema_for_mutation : Cow ::Borrowed ( schema_for_mutation ) ,
schema : schema ,
2017-02-15 00:50:40 +00:00
tx_id : tx_id ,
tx_instant : tx_instant ,
}
}
/// Given a collection of tempids and the [a v] pairs that they might upsert to, resolve exactly
/// which [a v] pairs do upsert to entids, and map each tempid that upserts to the upserted
/// entid. The keys of the resulting map are exactly those tempids that upserted.
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
pub fn resolve_temp_id_avs < ' b > ( & self , temp_id_avs : & ' b [ ( TempIdHandle , AVPair ) ] ) -> Result < TempIdMap > {
2017-02-15 00:50:40 +00:00
if temp_id_avs . is_empty ( ) {
return Ok ( TempIdMap ::default ( ) ) ;
}
// Map [a v]->entid.
let mut av_pairs : Vec < & AVPair > = vec! [ ] ;
for i in 0 .. temp_id_avs . len ( ) {
av_pairs . push ( & temp_id_avs [ i ] . 1 ) ;
}
// Lookup in the store.
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
let av_map : AVMap = self . store . resolve_avs ( & av_pairs [ .. ] ) ? ;
2017-02-15 00:50:40 +00:00
// Map id->entid.
let mut temp_id_map : TempIdMap = TempIdMap ::default ( ) ;
for & ( ref temp_id , ref av_pair ) in temp_id_avs {
if let Some ( n ) = av_map . get ( & av_pair ) {
2017-05-08 03:00:04 +00:00
if let Some ( & KnownEntid ( previous_n ) ) = temp_id_map . get ( & * temp_id ) {
if * n ! = previous_n {
2017-02-15 00:50:40 +00:00
// Conflicting upsert! TODO: collect conflicts and give more details on what failed this transaction.
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Conflicting upsert: tempid ' {} ' resolves to more than one entid: {:?} , {:?} " , temp_id , previous_n , n ) ) ) // XXX
}
}
2017-05-08 03:00:04 +00:00
temp_id_map . insert ( temp_id . clone ( ) , KnownEntid ( * n ) ) ;
2017-02-15 00:50:40 +00:00
}
}
Ok ( ( temp_id_map ) )
}
/// Pipeline stage 1: convert `Entity` instances into `Term` instances, ready for term
/// rewriting.
///
2017-03-20 18:34:38 +00:00
/// The `Term` instances produce share interned TempId and LookupRef handles, and we return the
/// interned handle sets so that consumers can ensure all handles are used appropriately.
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
fn entities_into_terms_with_temp_ids_and_lookup_refs < I > ( & self , entities : I ) -> Result < ( Vec < TermWithTempIdsAndLookupRefs > , intern_set ::InternSet < TempId > , intern_set ::InternSet < AVPair > ) > where I : IntoIterator < Item = Entity > {
2017-06-06 19:59:54 +00:00
struct InProcess < ' a > {
2017-05-08 03:00:04 +00:00
partition_map : & ' a PartitionMap ,
2017-06-06 19:59:54 +00:00
schema : & ' a Schema ,
mentat_id_count : i64 ,
temp_ids : intern_set ::InternSet < TempId > ,
lookup_refs : intern_set ::InternSet < AVPair > ,
}
impl < ' a > InProcess < ' a > {
2017-05-08 03:00:04 +00:00
fn with_schema_and_partition_map ( schema : & ' a Schema , partition_map : & ' a PartitionMap ) -> InProcess < ' a > {
2017-06-06 19:59:54 +00:00
InProcess {
2017-05-08 03:00:04 +00:00
partition_map ,
schema ,
2017-06-06 19:59:54 +00:00
mentat_id_count : 0 ,
temp_ids : intern_set ::InternSet ::new ( ) ,
lookup_refs : intern_set ::InternSet ::new ( ) ,
}
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
}
2017-02-15 00:50:40 +00:00
2017-05-08 03:00:04 +00:00
fn ensure_entid_exists ( & self , e : Entid ) -> Result < KnownEntid > {
if self . partition_map . contains_entid ( e ) {
Ok ( KnownEntid ( e ) )
} else {
bail! ( ErrorKind ::UnrecognizedEntid ( e ) )
}
}
fn ensure_ident_exists ( & self , e : & NamespacedKeyword ) -> Result < KnownEntid > {
let entid = self . schema . require_entid ( e ) ? ;
Ok ( KnownEntid ( entid ) )
}
2017-06-06 19:59:54 +00:00
fn intern_lookup_ref ( & mut self , lookup_ref : & entmod ::LookupRef ) -> Result < LookupRef > {
let lr_a : i64 = match lookup_ref . a {
entmod ::Entid ::Entid ( ref a ) = > * a ,
entmod ::Entid ::Ident ( ref a ) = > self . schema . require_entid ( & a ) ? ,
} ;
let lr_attribute : & Attribute = self . schema . require_attribute_for_entid ( lr_a ) ? ;
if lr_attribute . unique . is_none ( ) {
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Cannot resolve (lookup-ref {} {} ) with attribute that is not :db/unique " , lr_a , lookup_ref . v ) ) )
}
let lr_typed_value : TypedValue = self . schema . to_typed_value ( & lookup_ref . v , lr_attribute . value_type ) ? ;
Ok ( self . lookup_refs . intern ( ( lr_a , lr_typed_value ) ) )
}
fn intern_temp_id ( & mut self , temp_id : TempId ) -> Rc < TempId > {
self . temp_ids . intern ( temp_id )
}
/// Allocate private internal tempids reserved for Mentat. Internal tempids just need to be
/// unique within one transaction; they should never escape a transaction.
fn allocate_mentat_id ( & mut self ) -> entmod ::EntidOrLookupRefOrTempId {
self . mentat_id_count + = 1 ;
entmod ::EntidOrLookupRefOrTempId ::TempId ( TempId ::Internal ( self . mentat_id_count ) )
}
2017-06-06 20:18:47 +00:00
2017-05-08 03:00:04 +00:00
fn entity_e_into_term_e ( & mut self , x : entmod ::EntidOrLookupRefOrTempId ) -> Result < KnownEntidOr < LookupRefOrTempId > > {
2017-06-06 20:18:47 +00:00
match x {
entmod ::EntidOrLookupRefOrTempId ::Entid ( e ) = > {
2017-05-08 03:00:04 +00:00
let e = match e {
entmod ::Entid ::Entid ( ref e ) = > self . ensure_entid_exists ( * e ) ? ,
entmod ::Entid ::Ident ( ref e ) = > self . ensure_ident_exists ( & e ) ? ,
2017-06-06 20:18:47 +00:00
} ;
Ok ( Either ::Left ( e ) )
} ,
entmod ::EntidOrLookupRefOrTempId ::TempId ( e ) = > {
Ok ( Either ::Right ( LookupRefOrTempId ::TempId ( self . intern_temp_id ( e ) ) ) )
} ,
entmod ::EntidOrLookupRefOrTempId ::LookupRef ( ref lookup_ref ) = > {
Ok ( Either ::Right ( LookupRefOrTempId ::LookupRef ( self . intern_lookup_ref ( lookup_ref ) ? ) ) )
} ,
}
}
2017-06-07 20:37:40 +00:00
fn entity_a_into_term_a ( & mut self , x : entmod ::Entid ) -> Result < Entid > {
2017-06-06 20:18:47 +00:00
let a = match x {
entmod ::Entid ::Entid ( ref a ) = > * a ,
entmod ::Entid ::Ident ( ref a ) = > self . schema . require_entid ( & a ) ? ,
} ;
2017-06-07 20:37:40 +00:00
Ok ( a )
2017-06-06 20:18:47 +00:00
}
fn entity_e_into_term_v ( & mut self , x : entmod ::EntidOrLookupRefOrTempId ) -> Result < TypedValueOr < LookupRefOrTempId > > {
2017-05-08 03:00:04 +00:00
self . entity_e_into_term_e ( x ) . map ( | r | r . map_left ( | ke | TypedValue ::Ref ( ke . 0 ) ) )
2017-06-06 20:18:47 +00:00
}
2017-06-06 22:21:51 +00:00
2017-05-08 03:00:04 +00:00
fn entity_v_into_term_e ( & mut self , x : entmod ::AtomOrLookupRefOrVectorOrMapNotation , backward_a : & entmod ::Entid ) -> Result < KnownEntidOr < LookupRefOrTempId > > {
2017-06-07 20:37:40 +00:00
match backward_a . unreversed ( ) {
None = > {
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Cannot explode map notation value in :attr/_reversed notation for forward attribute " ) ) ) ;
2017-06-06 22:21:51 +00:00
} ,
2017-06-07 20:37:40 +00:00
Some ( forward_a ) = > {
let forward_a = self . entity_a_into_term_a ( forward_a ) ? ;
let forward_attribute = self . schema . require_attribute_for_entid ( forward_a ) ? ;
if forward_attribute . value_type ! = ValueType ::Ref {
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Cannot use :attr/_reversed notation for attribute {} that is not :db/valueType :db.type/ref " , forward_a ) ) )
2017-06-06 22:21:51 +00:00
}
2017-06-07 20:37:40 +00:00
match x {
entmod ::AtomOrLookupRefOrVectorOrMapNotation ::Atom ( ref v ) = > {
// Here is where we do schema-aware typechecking: we either assert
// that the given value is in the attribute's value set, or (in
// limited cases) coerce the value into the attribute's value set.
if let Some ( text ) = v . inner . as_text ( ) {
Ok ( Either ::Right ( LookupRefOrTempId ::TempId ( self . intern_temp_id ( TempId ::External ( text . clone ( ) ) ) ) ) )
} else {
if let TypedValue ::Ref ( entid ) = self . schema . to_typed_value ( & v . clone ( ) . without_spans ( ) , ValueType ::Ref ) ? {
2017-05-08 03:00:04 +00:00
Ok ( Either ::Left ( KnownEntid ( entid ) ) )
2017-06-07 20:37:40 +00:00
} else {
// The given value is expected to be :db.type/ref, so this shouldn't happen.
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Cannot use :attr/_reversed notation for attribute {} with value that is not :db.valueType :db.type/ref " , forward_a ) ) )
}
}
} ,
2017-06-06 22:21:51 +00:00
2017-06-07 20:37:40 +00:00
entmod ::AtomOrLookupRefOrVectorOrMapNotation ::LookupRef ( ref lookup_ref ) = >
Ok ( Either ::Right ( LookupRefOrTempId ::LookupRef ( self . intern_lookup_ref ( lookup_ref ) ? ) ) ) ,
2017-06-06 22:21:51 +00:00
2017-06-07 20:37:40 +00:00
entmod ::AtomOrLookupRefOrVectorOrMapNotation ::Vector ( _ ) = >
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Cannot explode vector value in :attr/_reversed notation for attribute {} " , forward_a ) ) ) ,
entmod ::AtomOrLookupRefOrVectorOrMapNotation ::MapNotation ( _ ) = >
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Cannot explode map notation value in :attr/_reversed notation for attribute {} " , forward_a ) ) ) ,
}
} ,
2017-06-06 22:21:51 +00:00
}
}
2017-06-06 19:59:54 +00:00
}
2017-05-08 03:00:04 +00:00
let mut in_process = InProcess ::with_schema_and_partition_map ( & self . schema , & self . partition_map ) ;
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
// We want to handle entities in the order they're given to us, while also "exploding" some
// entities into many. We therefore push the initial entities onto the back of the deque,
// take from the front of the deque, and explode onto the front as well.
let mut deque : VecDeque < Entity > = VecDeque ::default ( ) ;
deque . extend ( entities ) ;
let mut terms : Vec < TermWithTempIdsAndLookupRefs > = Vec ::with_capacity ( deque . len ( ) ) ;
while let Some ( entity ) = deque . pop_front ( ) {
match entity {
Entity ::MapNotation ( mut map_notation ) = > {
// :db/id is optional; if it's not given, we generate a special internal tempid
// to use for upserting. This tempid will not be reported in the TxReport.
2017-06-06 19:59:54 +00:00
let db_id : entmod ::EntidOrLookupRefOrTempId = mentat_tx_parser ::remove_db_id ( & mut map_notation ) ? . unwrap_or_else ( | | in_process . allocate_mentat_id ( ) ) ;
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
// We're not nested, so :db/isComponent is not relevant. We just explode the
// map notation.
for ( a , v ) in map_notation {
deque . push_front ( Entity ::AddOrRetract {
op : OpType ::Add ,
e : db_id . clone ( ) ,
a : a ,
v : v ,
} ) ;
}
} ,
2017-02-15 00:50:40 +00:00
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
Entity ::AddOrRetract { op , e , a , v } = > {
2017-06-07 20:37:40 +00:00
if let Some ( reversed_a ) = a . unreversed ( ) {
2017-06-06 22:21:51 +00:00
let reversed_e = in_process . entity_v_into_term_e ( v , & a ) ? ;
2017-06-07 20:37:40 +00:00
let reversed_a = in_process . entity_a_into_term_a ( reversed_a ) ? ;
2017-06-06 22:21:51 +00:00
let reversed_v = in_process . entity_e_into_term_v ( e ) ? ;
terms . push ( Term ::AddOrRetract ( OpType ::Add , reversed_e , reversed_a , reversed_v ) ) ;
} else {
2017-06-07 20:37:40 +00:00
let a = in_process . entity_a_into_term_a ( a ) ? ;
let attribute = self . schema . require_attribute_for_entid ( a ) ? ;
2017-02-15 00:50:40 +00:00
2017-06-06 22:38:38 +00:00
let v = match v {
entmod ::AtomOrLookupRefOrVectorOrMapNotation ::Atom ( v ) = > {
if attribute . value_type = = ValueType ::Ref & & v . inner . is_text ( ) {
Either ::Right ( LookupRefOrTempId ::TempId ( in_process . intern_temp_id ( v . inner . as_text ( ) . cloned ( ) . map ( TempId ::External ) . unwrap ( ) ) ) )
} else {
// Here is where we do schema-aware typechecking: we either assert that
// the given value is in the attribute's value set, or (in limited
// cases) coerce the value into the attribute's value set.
let typed_value : TypedValue = self . schema . to_typed_value ( & v . without_spans ( ) , attribute . value_type ) ? ;
Either ::Left ( typed_value )
}
} ,
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
2017-06-06 22:38:38 +00:00
entmod ::AtomOrLookupRefOrVectorOrMapNotation ::LookupRef ( ref lookup_ref ) = > {
if attribute . value_type ! = ValueType ::Ref {
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Cannot resolve value lookup ref for attribute {} that is not :db/valueType :db.type/ref " , a ) ) )
}
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
2017-06-06 22:38:38 +00:00
Either ::Right ( LookupRefOrTempId ::LookupRef ( in_process . intern_lookup_ref ( lookup_ref ) ? ) )
} ,
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
2017-06-06 22:38:38 +00:00
entmod ::AtomOrLookupRefOrVectorOrMapNotation ::Vector ( vs ) = > {
if ! attribute . multival {
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Cannot explode vector value for attribute {} that is not :db.cardinality :db.cardinality/many " , a ) ) ) ;
}
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
2017-06-06 22:38:38 +00:00
for vv in vs {
deque . push_front ( Entity ::AddOrRetract {
op : op . clone ( ) ,
e : e . clone ( ) ,
a : entmod ::Entid ::Entid ( a ) ,
v : vv ,
} ) ;
}
continue
} ,
entmod ::AtomOrLookupRefOrVectorOrMapNotation ::MapNotation ( mut map_notation ) = > {
// TODO: consider handling this at the tx-parser level. That would be
// more strict and expressive, but it would lead to splitting
// AddOrRetract, which proliferates types and code, or only handling
// nested maps rather than map values, like Datomic does.
if op ! = OpType ::Add {
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Cannot explode nested map value in :db/retract for attribute {} " , a ) ) ) ;
}
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
2017-06-06 22:38:38 +00:00
if attribute . value_type ! = ValueType ::Ref {
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Cannot explode nested map value for attribute {} that is not :db/valueType :db.type/ref " , a ) ) )
}
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
2017-06-06 22:38:38 +00:00
// :db/id is optional; if it's not given, we generate a special internal tempid
// to use for upserting. This tempid will not be reported in the TxReport.
let db_id : Option < entmod ::EntidOrLookupRefOrTempId > = mentat_tx_parser ::remove_db_id ( & mut map_notation ) ? ;
let mut dangling = db_id . is_none ( ) ;
let db_id : entmod ::EntidOrLookupRefOrTempId = db_id . unwrap_or_else ( | | in_process . allocate_mentat_id ( ) ) ;
// We're nested, so we want to ensure we're not creating "dangling"
// entities that can't be reached. If we're :db/isComponent, then this
// is not dangling. Otherwise, the resulting map needs to have a
// :db/unique :db.unique/identity [a v] pair, so that it's reachable.
// Per http://docs.datomic.com/transactions.html: "Either the reference
// to the nested map must be a component attribute, or the nested map
// must include a unique attribute. This constraint prevents the
// accidental creation of easily-orphaned entities that have no identity
// or relation to other entities."
if attribute . component {
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
dangling = false ;
2017-06-06 22:38:38 +00:00
}
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
2017-06-06 22:38:38 +00:00
for ( inner_a , inner_v ) in map_notation {
2017-06-07 20:37:40 +00:00
if let Some ( reversed_a ) = inner_a . unreversed ( ) {
2017-06-06 22:38:38 +00:00
// We definitely have a reference. The reference might be
// dangling (a bare entid, for example), but we don't yet
// support nested maps and reverse notation simultaneously
// (i.e., we don't accept {:reverse/_attribute {:nested map}})
// so we don't need to check that the nested map reference isn't
2017-06-07 20:37:40 +00:00
// dangling.
2017-06-06 22:21:51 +00:00
dangling = false ;
2017-06-06 22:38:38 +00:00
let reversed_e = in_process . entity_v_into_term_e ( inner_v , & inner_a ) ? ;
2017-06-07 20:37:40 +00:00
let reversed_a = in_process . entity_a_into_term_a ( reversed_a ) ? ;
2017-06-06 22:38:38 +00:00
let reversed_v = in_process . entity_e_into_term_v ( db_id . clone ( ) ) ? ;
terms . push ( Term ::AddOrRetract ( OpType ::Add , reversed_e , reversed_a , reversed_v ) ) ;
} else {
2017-06-07 20:37:40 +00:00
let inner_a = in_process . entity_a_into_term_a ( inner_a ) ? ;
let inner_attribute = self . schema . require_attribute_for_entid ( inner_a ) ? ;
2017-06-06 22:38:38 +00:00
if inner_attribute . unique = = Some ( attribute ::Unique ::Identity ) {
dangling = false ;
}
deque . push_front ( Entity ::AddOrRetract {
op : OpType ::Add ,
e : db_id . clone ( ) ,
a : entmod ::Entid ::Entid ( inner_a ) ,
v : inner_v ,
} ) ;
}
2017-06-06 22:21:51 +00:00
}
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
2017-06-06 22:38:38 +00:00
if dangling {
bail! ( ErrorKind ::NotYetImplemented ( format! ( " Cannot explode nested map value that would lead to dangling entity for attribute {} " , a ) ) ) ;
}
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
2017-06-06 22:38:38 +00:00
in_process . entity_e_into_term_v ( db_id ) ?
} ,
} ;
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
2017-06-06 22:38:38 +00:00
let e = in_process . entity_e_into_term_e ( e ) ? ;
terms . push ( Term ::AddOrRetract ( op , e , a , v ) ) ;
}
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
} ,
}
} ;
2017-06-06 19:59:54 +00:00
Ok ( ( terms , in_process . temp_ids , in_process . lookup_refs ) )
2017-02-15 00:50:40 +00:00
}
/// Pipeline stage 2: rewrite `Term` instances with lookup refs into `Term` instances without
/// lookup refs.
///
2017-06-06 03:31:39 +00:00
/// The `Term` instances produced share interned TempId handles and have no LookupRef references.
2017-02-15 00:50:40 +00:00
fn resolve_lookup_refs < I > ( & self , lookup_ref_map : & AVMap , terms : I ) -> Result < Vec < TermWithTempIds > > where I : IntoIterator < Item = TermWithTempIdsAndLookupRefs > {
terms . into_iter ( ) . map ( | term : TermWithTempIdsAndLookupRefs | -> Result < TermWithTempIds > {
match term {
Term ::AddOrRetract ( op , e , a , v ) = > {
2017-05-08 03:00:04 +00:00
let e = replace_lookup_ref ( & lookup_ref_map , e , | x | KnownEntid ( x ) ) ? ;
2017-02-15 00:50:40 +00:00
let v = replace_lookup_ref ( & lookup_ref_map , v , | x | TypedValue ::Ref ( x ) ) ? ;
Ok ( Term ::AddOrRetract ( op , e , a , v ) )
} ,
}
} ) . collect ::< Result < Vec < _ > > > ( )
}
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
/// Transact the given `entities` against the store.
2017-02-15 00:50:40 +00:00
///
/// This approach is explained in https://github.com/mozilla/mentat/wiki/Transacting.
// TODO: move this to the transactor layer.
pub fn transact_entities < I > ( & mut self , entities : I ) -> Result < TxReport > where I : IntoIterator < Item = Entity > {
// TODO: push these into an internal transaction report?
2017-05-08 03:00:04 +00:00
let mut tempids : BTreeMap < TempId , KnownEntid > = BTreeMap ::default ( ) ;
2017-02-15 00:50:40 +00:00
// Pipeline stage 1: entities -> terms with tempids and lookup refs.
2017-03-20 18:34:38 +00:00
let ( terms_with_temp_ids_and_lookup_refs , tempid_set , lookup_ref_set ) = self . entities_into_terms_with_temp_ids_and_lookup_refs ( entities ) ? ;
2017-02-15 00:50:40 +00:00
// Pipeline stage 2: resolve lookup refs -> terms with tempids.
2017-03-20 18:34:38 +00:00
let lookup_ref_avs : Vec < & ( i64 , TypedValue ) > = lookup_ref_set . inner . iter ( ) . map ( | rc | & * * rc ) . collect ( ) ;
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
let lookup_ref_map : AVMap = self . store . resolve_avs ( & lookup_ref_avs [ .. ] ) ? ;
2017-02-15 00:50:40 +00:00
let terms_with_temp_ids = self . resolve_lookup_refs ( & lookup_ref_map , terms_with_temp_ids_and_lookup_refs ) ? ;
// Pipeline stage 3: upsert tempids -> terms without tempids or lookup refs.
// Now we can collect upsert populations.
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
let ( mut generation , inert_terms ) = Generation ::from ( terms_with_temp_ids , & self . schema ) ? ;
2017-02-15 00:50:40 +00:00
// And evolve them forward.
while generation . can_evolve ( ) {
// Evolve further.
2017-03-20 18:34:38 +00:00
let temp_id_map : TempIdMap = self . resolve_temp_id_avs ( & generation . temp_id_avs ( ) [ .. ] ) ? ;
2017-02-15 00:50:40 +00:00
generation = generation . evolve_one_step ( & temp_id_map ) ;
2017-03-20 18:34:38 +00:00
// Report each tempid that resolves via upsert.
for ( tempid , entid ) in temp_id_map {
// Every tempid should be resolved at most once. Prima facie, we might expect a
// tempid to be resolved in two different generations. However, that is not so: the
// keys of temp_id_map are unique between generations.Suppose that id->e and id->e*
// are two such mappings, resolved on subsequent evolutionary steps, and that `id`
// is a key in the intersection of the two key sets. This can't happen: if `id` maps
// to `e` via id->e, all instances of `id` have been evolved forward (replaced with
// `e`) before we try to resolve the next set of `UpsertsE`. That is, we'll never
// successfully upsert the same tempid in more than one generation step. (We might
// upsert the same tempid to multiple entids via distinct `[a v]` pairs in a single
// generation step; in this case, the transaction will fail.)
let previous = tempids . insert ( ( * tempid ) . clone ( ) , entid ) ;
assert! ( previous . is_none ( ) ) ;
}
2017-02-15 00:50:40 +00:00
}
// Allocate entids for tempids that didn't upsert. BTreeSet rather than HashSet so this is deterministic.
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
let unresolved_temp_ids : BTreeSet < TempIdHandle > = generation . temp_ids_in_allocations ( ) ;
2017-02-15 00:50:40 +00:00
// TODO: track partitions for temporary IDs.
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
let entids = self . partition_map . allocate_entids ( " :db.part/user " , unresolved_temp_ids . len ( ) ) ;
2017-02-15 00:50:40 +00:00
2017-05-08 03:00:04 +00:00
let temp_id_allocations : TempIdMap = unresolved_temp_ids . into_iter ( )
. zip ( entids . map ( | e | KnownEntid ( e ) ) )
. collect ( ) ;
2017-02-15 00:50:40 +00:00
let final_populations = generation . into_final_populations ( & temp_id_allocations ) ? ;
2017-03-03 23:03:59 +00:00
2017-03-20 18:34:38 +00:00
// Report each tempid that is allocated.
for ( tempid , & entid ) in & temp_id_allocations {
// Every tempid should be allocated at most once.
assert! ( ! tempids . contains_key ( & * * tempid ) ) ;
tempids . insert ( ( * * tempid ) . clone ( ) , entid ) ;
}
// Verify that every tempid we interned either resolved or has been allocated.
assert_eq! ( tempids . len ( ) , tempid_set . inner . len ( ) ) ;
for tempid in & tempid_set . inner {
assert! ( tempids . contains_key ( & * * tempid ) ) ;
}
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
// Any internal tempid has been allocated by the system and is a private implementation
// detail; it shouldn't be exposed in the final transaction report.
2017-05-08 03:00:04 +00:00
let tempids = tempids . into_iter ( ) . filter_map ( | ( tempid , e ) | tempid . into_external ( ) . map ( | s | ( s , e . 0 ) ) ) . collect ( ) ;
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
// A transaction might try to add or retract :db/ident assertions or other metadata mutating
// assertions , but those assertions might not make it to the store. If we see a possible
// metadata mutation, we will figure out if any assertions made it through later. This is
// strictly an optimization: it would be correct to _always_ check what made it to the
// store.
let mut tx_might_update_metadata = false ;
2017-03-21 20:12:10 +00:00
let final_terms : Vec < TermWithoutTempIds > = [ final_populations . resolved ,
final_populations . allocated ,
inert_terms . into_iter ( ) . map ( | term | term . unwrap ( ) ) . collect ( ) ] . concat ( ) ;
{ // TODO: Don't use this block to scope borrowing the schema; instead, extract a helper function.
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
/// Assertions that are :db.cardinality/one and not :db.fulltext.
let mut non_fts_one : Vec < db ::ReducedEntity > = vec! [ ] ;
/// Assertions that are :db.cardinality/many and not :db.fulltext.
let mut non_fts_many : Vec < db ::ReducedEntity > = vec! [ ] ;
2017-03-21 20:12:10 +00:00
/// Assertions that are :db.cardinality/one and :db.fulltext.
let mut fts_one : Vec < db ::ReducedEntity > = vec! [ ] ;
/// Assertions that are :db.cardinality/many and :db.fulltext.
let mut fts_many : Vec < db ::ReducedEntity > = vec! [ ] ;
2017-02-15 00:50:40 +00:00
2017-05-08 03:00:04 +00:00
// We need to ensure that callers can't blindly transact entities that haven't been
// allocated by this store.
2017-02-15 00:50:40 +00:00
// Pipeline stage 4: final terms (after rewriting) -> DB insertions.
// Collect into non_fts_*.
// TODO: use something like Clojure's group_by to do this.
for term in final_terms {
match term {
Term ::AddOrRetract ( op , e , a , v ) = > {
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
let attribute : & Attribute = self . schema . require_attribute_for_entid ( a ) ? ;
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
if entids ::might_update_metadata ( a ) {
tx_might_update_metadata = true ;
}
2017-02-15 00:50:40 +00:00
let added = op = = OpType ::Add ;
2017-05-08 03:00:04 +00:00
let reduced = ( e . 0 , a , attribute , v , added ) ;
2017-03-21 20:12:10 +00:00
match ( attribute . fulltext , attribute . multival ) {
( false , true ) = > non_fts_many . push ( reduced ) ,
( false , false ) = > non_fts_one . push ( reduced ) ,
( true , false ) = > fts_one . push ( reduced ) ,
( true , true ) = > fts_many . push ( reduced ) ,
2017-02-15 00:50:40 +00:00
}
} ,
}
}
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
// Transact [:db/add :db/txInstant NOW :db/tx].
// TODO: allow this to be present in the transaction data.
non_fts_one . push ( ( self . tx_id ,
entids ::DB_TX_INSTANT ,
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
self . schema . require_attribute_for_entid ( entids ::DB_TX_INSTANT ) . unwrap ( ) ,
2017-04-29 03:11:55 +00:00
TypedValue ::Instant ( self . tx_instant ) ,
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
true ) ) ;
2017-02-15 00:50:40 +00:00
if ! non_fts_one . is_empty ( ) {
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
self . store . insert_non_fts_searches ( & non_fts_one [ .. ] , db ::SearchType ::Inexact ) ? ;
2017-02-15 00:50:40 +00:00
}
if ! non_fts_many . is_empty ( ) {
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
self . store . insert_non_fts_searches ( & non_fts_many [ .. ] , db ::SearchType ::Exact ) ? ;
2017-02-15 00:50:40 +00:00
}
2017-03-21 20:12:10 +00:00
if ! fts_one . is_empty ( ) {
self . store . insert_fts_searches ( & fts_one [ .. ] , db ::SearchType ::Inexact ) ? ;
}
if ! fts_many . is_empty ( ) {
self . store . insert_fts_searches ( & fts_many [ .. ] , db ::SearchType ::Exact ) ? ;
}
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
self . store . commit_transaction ( self . tx_id ) ? ;
Lookup refs, nested vector values, map notation. Fixes #180, fixes #183, fixes #284. (#382) r=rnewman
* Pre: Fix error in parser macros.
* Pre: Make test unwrapping more verbose.
* Pre: Make lookup refs be (lookup-ref a v) in the entity position.
This has the advantage of being explicit in all situations and
unambiguous at parse-time. This choice agrees with the Clojure
implementation but not with Datomic. Datomic treats [a v] as a lookup
ref, is ambiguous at parse-time, and is disambiguated in ways I do not
understand at transaction time. We mooted making lookup refs [[a v]]
and outlawing nested value vectors in transactions, but after
implementing that approach I decided it was better to handle lookup
refs at parse time and therefore outlawing nested value vectors is not
necessary.
* Handle lookup refs in the entity and value columns. Fixes #183.
* Pre 0a: Use a stack instead of into_iter.
* Pre 0b: Dedent.
* Pre 0c: Handle `e` after `v`.
This allows to use the original `e` while handling `v`.
* Explode value lists for :db.cardinality/many attributes. Fixes #284.
* Parse and accept map notation. Fixes #180.
* Pre: Modernize add() and retract() into one add_or_retract().
* Pre: Add is_collection and is_atom to edn::Value.
* Pre: Differentiate atoms from lookup-refs in value position.
Initially, I expected to accept arbitrary edn::Value instances in the
value position, and to differentiate in the transactor. However, the
implementation quickly became a two-stage parser, since we always
wanted to parse the resulting value position into some other known
thing using the tx-parser. To save calls into the parser and to allow
the parser to move forward with a smaller API surface, I push as much
of this parsing as possible into the initial parse.
* Pre: Modernize entities().
* Pre: Quote edn::Value::Text in Display.
* Review comment: Add and use edn::Value::into_atom.
* Review comment: Use skip(eof()) throughout.
* Review comment: VecDeque instead of Vec.
* Review comment: Part 0: Rename TempId to TempIdHandle.
* Review comment: Part 1: Differentiate internal and external tempids.
This breaks an abstraction boundary by pushing the Internal/External
split up to the Entity level in tx/ and tx-parser/. This just makes
it easier to explode Entity map notation instances into Entity
instances, taking an existing External tempid :db/id or generating a
new Internal tempid as appropriate. To do this without breaking the
abstraction boundary would require adding flexibility to the
transaction processor: we'd need to be able to turn Entity instances
into some internal enum and handle the two cases independently. It
wouldn't be too hard, but this reduces the combinatorial type
explosion.
2017-03-27 23:30:04 +00:00
}
2017-02-15 00:50:40 +00:00
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
db ::update_partition_map ( self . store , & self . partition_map ) ? ;
2017-02-15 00:50:40 +00:00
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
if tx_might_update_metadata {
// Extract changes to metadata from the store.
let metadata_assertions = self . store . committed_metadata_assertions ( self . tx_id ) ? ;
let mut new_schema = ( * self . schema_for_mutation ) . clone ( ) ; // Clone the underlying Schema for modification.
let metadata_report = metadata ::update_schema_from_entid_quadruples ( & mut new_schema , metadata_assertions ) ? ;
// We might not have made any changes to the schema, even though it looked like we
// would. This should not happen, even during bootstrapping: we mutate an empty
// `Schema` in this case specifically to run the bootstrapped assertions through the
// regular transactor code paths, updating the schema and materialized views uniformly.
// But, belt-and-braces: handle it gracefully.
if new_schema ! = * self . schema_for_mutation {
let old_schema = ( * self . schema_for_mutation ) . clone ( ) ; // Clone the original Schema for comparison.
* self . schema_for_mutation . to_mut ( ) = new_schema ; // Store the new Schema.
db ::update_metadata ( self . store , & old_schema , & * self . schema_for_mutation , & metadata_report ) ? ;
}
}
2017-02-15 00:50:40 +00:00
Ok ( TxReport {
tx_id : self . tx_id ,
tx_instant : self . tx_instant ,
2017-03-20 18:34:38 +00:00
tempids : tempids ,
2017-02-15 00:50:40 +00:00
} )
}
}
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
2017-03-03 23:03:59 +00:00
/// Transact the given `entities` against the given SQLite `conn`, using the given metadata.
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
///
/// This approach is explained in https://github.com/mozilla/mentat/wiki/Transacting.
// TODO: move this to the transactor layer.
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
pub fn transact < ' conn , ' a , I > (
conn : & ' conn rusqlite ::Connection ,
mut partition_map : PartitionMap ,
schema_for_mutation : & ' a Schema ,
schema : & ' a Schema ,
entities : I ) -> Result < ( TxReport , PartitionMap , Option < Schema > ) > where I : IntoIterator < Item = Entity > {
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
// Eventually, this function will be responsible for managing a SQLite transaction. For
// now, it's just about the tx details.
let tx_instant = ::now ( ) ; // Label the transaction with the timestamp when we first see it: leading edge.
2017-03-03 23:03:59 +00:00
let tx_id = partition_map . allocate_entid ( " :db.part/tx " ) ;
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
conn . begin_transaction ( ) ? ;
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
let mut tx = Tx ::new ( conn , partition_map , schema_for_mutation , schema , tx_id , tx_instant ) ;
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
let report = tx . transact_entities ( entities ) ? ;
// If the schema has moved on, return it.
Schema alteration. Fixes #294 and #295. (#370) r=rnewman
* Pre: Don't retract :db/ident in test.
Datomic (and eventually Mentat) don't allow to retract :db/ident in
this way, so this runs afoul of future work to support mutating
metadata.
* Pre: s/VALUETYPE/VALUE_TYPE/.
This is consistent with the capitalization (which is "valueType") and
the other identifier.
* Pre: Remove some single quotes from error output.
* Part 1: Make materialized views be uniform [e a v value_type_tag].
This looks ahead to a time when we could support arbitrary
user-defined materialized views. For now, the "idents" materialized
view is those datoms of the form [e :db/ident :namespaced/keyword] and
the "schema" materialized view is those datoms of the form [e a v]
where a is in a particular set of attributes that will become clear in
the following commits.
This change is not backwards compatible, so I'm removing the open
current (really, v2) test. It'll be re-instated when we get to
https://github.com/mozilla/mentat/issues/194.
* Pre: Map TypedValue::Ref to TypedValue::Keyword in debug output.
* Part 3: Separate `schema_to_mutate` from the `schema` used to interpret.
This is just to keep track of the expected changes during
bootstrapping. I want bootstrap metadata mutations to flow through
the same code path as metadata mutations during regular transactions;
by differentiating the schema used for interpretation from the schema
that will be updated I expect to be able to apply bootstrap metadata
mutations to an empty schema and have things like materialized views
created (using the regular code paths).
This commit has been re-ordered for conceptual clarity, but it won't
compile because it references the metadata module. It's possible to
make it compile -- the functionality is there in the schema module --
but it's not worth the rebasing effort until after review (and
possibly not even then, since we'll squash down to a single commit to
land).
* Part 2: Maintain entids separately from idents.
In order to support historical idents, we need to distinguish the
"current" map from entid -> ident from the "complete historical" map
ident -> entid. This is what Datomic does; in Datomic, an ident is
never retracted (although it can be replaced). This approach is an
important part of allowing multiple consumers to share a schema
fragment as it migrates forward.
This fixes a limitation of the Clojure implementation, which did not
handle historical idents across knowledge base close and re-open.
The "entids" materialized view is naturally a slice of the "datoms"
table. The "idents" materialized view is a slice of the
"transactions" table. I hope that representing in this way, and
casting the problem in this light, might generalize to future
materialized views.
* Pre: Add DiffSet.
* Part 4: Collect mutations to a `Schema`.
I haven't taken your review comment about consuming AttributeBuilder
during each fluent function. If you read my response and still want
this, I'm happy to do it in review.
* Part 5: Handle :db/ident and :db.{install,alter}/attribute.
This "loops" the committed datoms out of the SQL store and back
through the metadata (schema, but in future also partition map)
processor. The metadata processor updates the schema and produces a
report of what changed; that report is then used to update the SQL
store. That update includes:
- the materialized views ("entids", "idents", and "schema");
- if needed, a subset of the datoms themselves (as flags change).
I've left a TODO for handling attribute retraction in the cases that
it makes sense. I expect that to be straight-forward.
* Review comment: Rename DiffSet to AddRetractAlterSet.
Also adds a little more commentary and a simple test.
* Review comment: Use ToIdent trait.
* Review comment: partially revert "Part 2: Maintain entids separately from idents."
This reverts commit 23a91df9c35e14398f2ddbd1ba25315821e67401.
Following our discussion, this removes the "entids" materialized
view. The next commit will remove historical idents from the "idents"
materialized view.
* Post: Use custom Either rather than std::result::Result.
This is not necessary, but it was suggested that we might be paying an
overhead creating Err instances while using error_chain. That seems
not to be the case, but this change shows that we don't actually use
any of the Result helper methods, so there's no reason to overload
Result. This change might avoid some future confusion, so I'm going
to land it anyway.
Signed-off-by: Nick Alexander <nalexander@mozilla.com>
* Review comment: Don't preserve historical idents.
* Review comment: More prepared statements when updating materialized views.
* Post: Test altering :db/cardinality and :db/unique.
These tests fail due to a Datomic limitation, namely that the marker
flag :db.alter/attribute can only be asserted once for an attribute!
That is, [:db.part/db :db.alter/attribute :attribute] will only be
transacted at most once. Since older versions of Datomic required the
:db.alter/attribute flag, I can only imagine they either never wrote
:db.alter/attribute to the store, or they handled it specially. I'll
need to remove the marker flag system from Mentat in order to address
this fundamental limitation.
* Post: Remove some more single quotes from error output.
* Post: Add assert_transact! macro to unwrap safely.
I was finding it very difficult to track unwrapping errors while
making changes, due to an underlying Mac OS X symbolication issue that
makes running tests with RUST_BACKTRACE=1 so slow that they all time
out.
* Post: Don't expect or recognize :db.{install,alter}/attribute.
I had this all working... except we will never see a repeated
`[:db.part/db :db.alter/attribute :attribute]` assertion in the store!
That means my approach would let you alter an attribute at most one
time. It's not worth hacking around this; it's better to just stop
expecting (and recognizing) the marker flags. (We have all the data
to distinguish the various cases that we need without the marker
flags.)
This brings Mentat in line with the thrust of newer Datomic versions,
but isn't compatible with Datomic, because (if I understand correctly)
Datomic automatically adds :db.{install,alter}/attribute assertions to
transactions.
I haven't purged the corresponding :db/ident and schema fragments just
yet:
- we might want them back
- we might want them in order to upgrade v1 and v2 databases to the
new on-disk layout we're fleshing out (v3?).
* Post: Don't make :db/unique :db.unique/* imply :db/index true.
This patch avoids a potential bug with the "schema" materialized view.
If :db/unique :db.unique/value implies :db/index true, then what
happens when you _retract_ :db.unique/value? I think Datomic defines
this in some way, but I really want the "schema" materialized view to
be a slice of "datoms" and not have these sort of ambiguities and
persistent effects. Therefore, to ensure that we don't retract a
schema characteristic and accidentally change more than we intended
to, this patch stops having any schema characteristic imply any other
schema characteristic(s). To achieve that, I added an
Option<Unique::{Value,Identity}> type to Attribute; this helps with
this patch, and also looks ahead to when we allow to retract
:db/unique attributes.
* Post: Allow to retract :db/ident.
* Post: Include more details about invalid schema changes.
The tests use strings, so they hide the chained errors which do in
fact provide more detail.
* Review comment: Fix outdated comment.
* Review comment: s/_SET/_SQL_LIST/.
* Review comment: Use a sub-select for checking cardinality.
This might be faster in practice.
* Review comment: Put `attribute::Unique` into its own namespace.
2017-03-20 20:18:59 +00:00
let next_schema = match tx . schema_for_mutation {
Extract partial storage abstraction; use error-chain throughout. Fixes #328. r=rnewman (#341)
* Pre: Drop unneeded tx0 from search results.
* Pre: Don't require a schema in some of the DB code.
The idea is to separate the transaction applying code, which is
schema-aware, from the concrete storage code, which is just concerned
with getting bits onto disk.
* Pre: Only reference Schema, not DB, in debug module.
This is part of a larger separation of the volatile PartitionMap,
which is modified every transaction, from the stable Schema, which is
infrequently modified.
* Pre: Fix indentation.
* Extract part of DB to new SchemaTypeChecking trait.
* Extract part of DB to new PartitionMapping trait.
* Pre: Don't expect :db.part/tx partition to advance when tx fails.
This fails right now, because we allocate tx IDs even when we shouldn't.
* Sketch a db interface without DB.
* Add ValueParseError; use error-chain in tx-parser.
This can be simplified when
https://github.com/Marwes/combine/issues/86 makes it to a published
release, but this unblocks us for now. This converts the `combine`
error type `ParseError<&'a [edn::Value]>` to a type with owned
`Vec<edn::Value>` collections, re-using `edn::Value::Vector` for
making them `Display`.
* Pre: Accept Borrow<Schema> instead of just &Schema in debug module.
This makes it easy to use Rc<Schema> or Arc<Schema> without inserting
&* sigils throughout the code.
* Use error-chain in query-parser.
There are a few things to point out here:
- the fine grained error types have been flattened into one crate-wide
error type; it's pretty easy to regain the granularity as needed.
- edn::ParseError is automatically lifted to
mentat_query_parser::errors::Error;
- we use mentat_parser_utils::ValueParser to maintain parsing error
information from `combine`.
* Patch up top-level.
* Review comment: Only `borrow()` once.
2017-02-24 23:32:41 +00:00
Cow ::Borrowed ( _ ) = > None ,
Cow ::Owned ( next_schema ) = > Some ( next_schema ) ,
} ;
Ok ( ( report , tx . partition_map , next_schema ) )
}