Trait tokio::prelude::AsyncWrite

pub trait AsyncWrite: Write {
    fn shutdown(&mut self) -> Result<Async<()>, Error>;

    fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>, Error> { ... }
    fn poll_flush(&mut self) -> Result<Async<()>, Error> { ... }
    fn write_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error>
    where
        B: Buf,
    { ... }
}

Writes bytes asynchronously.

The trait inherits from std::io::Write and indicates that an I/O object is nonblocking. All non-blocking I/O objects must return an error when bytes cannot be written instead of blocking the current thread.

Specifically, this means that the write function will return one of the following:

• Ok(n) means that n bytes of data was immediately written .

• Err(e) if e.kind() == ErrorKind::WouldBlock means that no data was written from the buffer provided. The I/O object is not currently writable but may become writable in the future. Most importantly, the current future's task is scheduled to get unparked when the object is readable. This means that like Future::poll you'll receive a notification when the I/O object is writable again.

• Err(e) for other errors are standard I/O errors coming from the underlying object.

This trait importantly means that the write method only works in the context of a future's task. The object may panic if used outside of a task.

Note that this trait also represents that the Write::flush method works very similarly to the write method, notably that Ok(()) means that the writer has successfully been flushed, a "would block" error means that the current task is ready to receive a notification when flushing can make more progress, and otherwise normal errors can happen as well.

Required Methods

fn shutdown(&mut self) -> Result<Async<()>, Error>

Initiates or attempts to shut down this writer, returning success when the I/O connection has completely shut down.

This method is intended to be used for asynchronous shutdown of I/O connections. For example this is suitable for implementing shutdown of a TLS connection or calling TcpStream::shutdown on a proxied connection. Protocols sometimes need to flush out final pieces of data or otherwise perform a graceful shutdown handshake, reading/writing more data as appropriate. This method is the hook for such protocols to implement the graceful shutdown logic.

This shutdown method is required by implementors of the AsyncWrite trait. Wrappers typically just want to proxy this call through to the wrapped type, and base types will typically implement shutdown logic here or just return Ok(().into()). Note that if you're wrapping an underlying AsyncWrite a call to shutdown implies that transitively the entire stream has been shut down. After your wrapper's shutdown logic has been executed you should shut down the underlying stream.

Invocation of a shutdown implies an invocation of flush. Once this method returns Ready it implies that a flush successfully happened before the shutdown happened. That is, callers don't need to call flush before calling shutdown. They can rely that by calling shutdown any pending buffered data will be written out.

Return value

This function returns a Poll<(), io::Error> classified as such:

• Ok(Async::Ready(())) - indicates that the connection was successfully shut down and is now safe to deallocate/drop/close resources associated with it. This method means that the current task will no longer receive any notifications due to this method and the I/O object itself is likely no longer usable.

• Ok(Async::NotReady) - indicates that shutdown is initiated but could not complete just yet. This may mean that more I/O needs to happen to continue this shutdown operation. The current task is scheduled to receive a notification when it's otherwise ready to continue the shutdown operation. When woken up this method should be called again.

• Err(e) - indicates a fatal error has happened with shutdown, indicating that the shutdown operation did not complete successfully. This typically means that the I/O object is no longer usable.

Errors

This function can return normal I/O errors through Err, described above. Additionally this method may also render the underlying Write::write method no longer usable (e.g. will return errors in the future). It's recommended that once shutdown is called the write method is no longer called.

Panics

This function will panic if not called within the context of a future's task.

Provided Methods

fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>, Error>

Attempt to write bytes from buf into the object.

On success, returns Ok(Async::Ready(num_bytes_written)).

If the object is not ready for writing, the method returns Ok(Async::Pending) and arranges for the current task (via cx.waker()) to receive a notification when the object becomes readable or is closed.

fn poll_flush(&mut self) -> Result<Async<()>, Error>

Attempt to flush the object, ensuring that any buffered data reach their destination.

On success, returns Ok(Async::Ready(())).

If flushing cannot immediately complete, this method returns Ok(Async::Pending) and arranges for the current task (via cx.waker()) to receive a notification when the object can make progress towards flushing.

fn write_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: Buf, 

Write a Buf into this value, returning how many bytes were written.

Note that this method will advance the buf provided automatically by the number of bytes written.

Implementations on Foreign Types

impl AsyncWrite for Cursor<Vec<u8>>

fn shutdown(&mut self) -> Result<Async<()>, Error>

fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>, Error>

fn poll_flush(&mut self) -> Result<Async<()>, Error>

fn write_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: Buf, 

impl AsyncWrite for Sink

fn shutdown(&mut self) -> Result<Async<()>, Error>

fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>, Error>

fn poll_flush(&mut self) -> Result<Async<()>, Error>

fn write_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: Buf, 

impl<T> AsyncWrite for AllowStdIo<T> where
    T: Write, 

fn shutdown(&mut self) -> Result<Async<()>, Error>

fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>, Error>

fn poll_flush(&mut self) -> Result<Async<()>, Error>

fn write_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: Buf, 

impl<T> AsyncWrite for BufWriter<T> where
    T: AsyncWrite, 

fn shutdown(&mut self) -> Result<Async<()>, Error>

fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>, Error>

fn poll_flush(&mut self) -> Result<Async<()>, Error>

fn write_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: Buf, 

impl AsyncWrite for Cursor<Box<[u8]>>

fn shutdown(&mut self) -> Result<Async<()>, Error>

fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>, Error>

fn poll_flush(&mut self) -> Result<Async<()>, Error>

fn write_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: Buf, 

impl<'a> AsyncWrite for Cursor<&'a mut [u8]>

fn shutdown(&mut self) -> Result<Async<()>, Error>

fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>, Error>

fn poll_flush(&mut self) -> Result<Async<()>, Error>

fn write_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: Buf, 

impl<T> AsyncWrite for Box<T> where
    T: AsyncWrite + ?Sized, 

fn shutdown(&mut self) -> Result<Async<()>, Error>

fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>, Error>

fn poll_flush(&mut self) -> Result<Async<()>, Error>

fn write_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: Buf, 

impl<'a, T> AsyncWrite for &'a mut T where
    T: AsyncWrite + ?Sized, 

fn shutdown(&mut self) -> Result<Async<()>, Error>

fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>, Error>

fn poll_flush(&mut self) -> Result<Async<()>, Error>

fn write_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: Buf, 

Implementors

• impl<T> AsyncWrite for WriteHalf<T> where
    T: AsyncWrite, 
• impl AsyncWrite for Stderr
• impl AsyncWrite for File
• impl AsyncWrite for Stdout
• impl<'a, E> AsyncWrite for &'a PollEvented<E> where
    E: Evented,
    &'a E: Write, 
• impl<E> AsyncWrite for PollEvented<E> where
    E: Evented + Write, 
• impl AsyncWrite for TcpStream
• impl<'a> AsyncWrite for &'a TcpStream