Struct bytes::BytesMut [] [src]

pub struct BytesMut { /* fields omitted */ }

A unique reference to a contiguous slice of memory.

BytesMut represents a unique view into a potentially shared memory region. Given the uniqueness guarantee, owners of BytesMut handles are able to mutate the memory. It is similar to a Vec<u8> but with less copies and allocations.

For more detail, see Bytes.

Growth

One key difference from Vec<u8> is that most operations do not implicitly grow the buffer. This means that calling my_bytes.put("hello world"); could panic if my_bytes does not have enough capacity. Before writing to the buffer, ensure that there is enough remaining capacity by calling my_bytes.remaining_mut(). In general, avoiding calls to reserve is preferable.

The only exception is extend which implicitly reserves required capacity.

Examples

use bytes::{BytesMut, BufMut};

let mut buf = BytesMut::with_capacity(64);

buf.put(b'h');
buf.put(b'e');
buf.put("llo");

assert_eq!(&buf[..], b"hello");

// Freeze the buffer so that it can be shared
let a = buf.freeze();

// This does not allocate, instead `b` points to the same memory.
let b = a.clone();

assert_eq!(&a[..], b"hello");
assert_eq!(&b[..], b"hello");

Methods

impl BytesMut
[src]

[src]

Creates a new BytesMut with the specified capacity.

The returned BytesMut will be able to hold at least capacity bytes without reallocating. If capacity is under 4 * size_of::<usize>() - 1, then BytesMut will not allocate.

It is important to note that this function does not specify the length of the returned BytesMut, but only the capacity.

Examples

use bytes::{BytesMut, BufMut};

let mut bytes = BytesMut::with_capacity(64);

// `bytes` contains no data, even though there is capacity
assert_eq!(bytes.len(), 0);

bytes.put(&b"hello world"[..]);

assert_eq!(&bytes[..], b"hello world");

[src]

Creates a new BytesMut with default capacity.

Resulting object has length 0 and unspecified capacity. This function does not allocate.

Examples

use bytes::{BytesMut, BufMut};

let mut bytes = BytesMut::new();

assert_eq!(0, bytes.len());

bytes.reserve(2);
bytes.put_slice(b"xy");

assert_eq!(&b"xy"[..], &bytes[..]);

[src]

Returns the number of bytes contained in this BytesMut.

Examples

use bytes::BytesMut;

let b = BytesMut::from(&b"hello"[..]);
assert_eq!(b.len(), 5);

[src]

Returns true if the BytesMut has a length of 0.

Examples

use bytes::BytesMut;

let b = BytesMut::with_capacity(64);
assert!(b.is_empty());

[src]

Returns the number of bytes the BytesMut can hold without reallocating.

Examples

use bytes::BytesMut;

let b = BytesMut::with_capacity(64);
assert_eq!(b.capacity(), 64);

[src]

Converts self into an immutable Bytes.

The conversion is zero cost and is used to indicate that the slice referenced by the handle will no longer be mutated. Once the conversion is done, the handle can be cloned and shared across threads.

Examples

use bytes::{BytesMut, BufMut};
use std::thread;

let mut b = BytesMut::with_capacity(64);
b.put("hello world");
let b1 = b.freeze();
let b2 = b1.clone();

let th = thread::spawn(move || {
    assert_eq!(&b1[..], b"hello world");
});

assert_eq!(&b2[..], b"hello world");
th.join().unwrap();

[src]

Splits the bytes into two at the given index.

Afterwards self contains elements [0, at), and the returned BytesMut contains elements [at, capacity).

This is an O(1) operation that just increases the reference count and sets a few indices.

Examples

use bytes::BytesMut;

let mut a = BytesMut::from(&b"hello world"[..]);
let mut b = a.split_off(5);

a[0] = b'j';
b[0] = b'!';

assert_eq!(&a[..], b"jello");
assert_eq!(&b[..], b"!world");

Panics

Panics if at > capacity.

[src]

Removes the bytes from the current view, returning them in a new BytesMut handle.

Afterwards, self will be empty, but will retain any additional capacity that it had before the operation. This is identical to self.split_to(self.len()).

This is an O(1) operation that just increases the reference count and sets a few indices.

Examples

use bytes::{BytesMut, BufMut};

let mut buf = BytesMut::with_capacity(1024);
buf.put(&b"hello world"[..]);

let other = buf.take();

assert!(buf.is_empty());
assert_eq!(1013, buf.capacity());

assert_eq!(other, b"hello world"[..]);

[src]

Splits the buffer into two at the given index.

Afterwards self contains elements [at, len), and the returned BytesMut contains elements [0, at).

This is an O(1) operation that just increases the reference count and sets a few indices.

Examples

use bytes::BytesMut;

let mut a = BytesMut::from(&b"hello world"[..]);
let mut b = a.split_to(5);

a[0] = b'!';
b[0] = b'j';

assert_eq!(&a[..], b"!world");
assert_eq!(&b[..], b"jello");

Panics

Panics if at > len.

[src]

Shortens the buffer, keeping the first len bytes and dropping the rest.

If len is greater than the buffer's current length, this has no effect.

The split_off method can emulate truncate, but this causes the excess bytes to be returned instead of dropped.

Examples

use bytes::BytesMut;

let mut buf = BytesMut::from(&b"hello world"[..]);
buf.truncate(5);
assert_eq!(buf, b"hello"[..]);

[src]

Shortens the buffer, dropping the first cnt bytes and keeping the rest.

This is the same function as Buf::advance, and in the next breaking release of bytes, this implementation will be removed in favor of having BytesMut implement Buf.

Panics

This function panics if cnt is greater than self.len()

[src]

Clears the buffer, removing all data.

Examples

use bytes::BytesMut;

let mut buf = BytesMut::from(&b"hello world"[..]);
buf.clear();
assert!(buf.is_empty());

[src]

Resizes the buffer so that len is equal to new_len.

If new_len is greater than len, the buffer is extended by the difference with each additional byte set to value. If new_len is less than len, the buffer is simply truncated.

Examples

use bytes::BytesMut;

let mut buf = BytesMut::new();

buf.resize(3, 0x1);
assert_eq!(&buf[..], &[0x1, 0x1, 0x1]);

buf.resize(2, 0x2);
assert_eq!(&buf[..], &[0x1, 0x1]);

buf.resize(4, 0x3);
assert_eq!(&buf[..], &[0x1, 0x1, 0x3, 0x3]);

[src]

Sets the length of the buffer.

This will explicitly set the size of the buffer without actually modifying the data, so it is up to the caller to ensure that the data has been initialized.

Examples

use bytes::BytesMut;

let mut b = BytesMut::from(&b"hello world"[..]);

unsafe {
    b.set_len(5);
}

assert_eq!(&b[..], b"hello");

unsafe {
    b.set_len(11);
}

assert_eq!(&b[..], b"hello world");

Panics

This method will panic if len is out of bounds for the underlying slice or if it comes after the end of the configured window.

[src]

Reserves capacity for at least additional more bytes to be inserted into the given BytesMut.

More than additional bytes may be reserved in order to avoid frequent reallocations. A call to reserve may result in an allocation.

Before allocating new buffer space, the function will attempt to reclaim space in the existing buffer. If the current handle references a small view in the original buffer and all other handles have been dropped, and the requested capacity is less than or equal to the existing buffer's capacity, then the current view will be copied to the front of the buffer and the handle will take ownership of the full buffer.

Examples

In the following example, a new buffer is allocated.

use bytes::BytesMut;

let mut buf = BytesMut::from(&b"hello"[..]);
buf.reserve(64);
assert!(buf.capacity() >= 69);

In the following example, the existing buffer is reclaimed.

use bytes::{BytesMut, BufMut};

let mut buf = BytesMut::with_capacity(128);
buf.put(&[0; 64][..]);

let ptr = buf.as_ptr();
let other = buf.take();

assert!(buf.is_empty());
assert_eq!(buf.capacity(), 64);

drop(other);
buf.reserve(128);

assert_eq!(buf.capacity(), 128);
assert_eq!(buf.as_ptr(), ptr);

Panics

Panics if the new capacity overflows usize.

[src]

Appends given bytes to this object.

If this BytesMut object has not enough capacity, it is resized first. So unlike put_slice operation, extend_from_slice does not panic.

Examples

use bytes::BytesMut;

let mut buf = BytesMut::with_capacity(0);
buf.extend_from_slice(b"aaabbb");
buf.extend_from_slice(b"cccddd");

assert_eq!(b"aaabbbcccddd", &buf[..]);

[src]

Combine splitted BytesMut objects back as contiguous.

If BytesMut objects were not contiguous originally, they will be extended.

Examples

use bytes::BytesMut;

let mut buf = BytesMut::with_capacity(64);
buf.extend_from_slice(b"aaabbbcccddd");

let splitted = buf.split_off(6);
assert_eq!(b"aaabbb", &buf[..]);
assert_eq!(b"cccddd", &splitted[..]);

buf.unsplit(splitted);
assert_eq!(b"aaabbbcccddd", &buf[..]);

Methods from Deref<Target = [u8]>

1.0.0
[src]

Returns the number of elements in the slice.

Examples

let a = [1, 2, 3];
assert_eq!(a.len(), 3);

1.0.0
[src]

Returns true if the slice has a length of 0.

Examples

let a = [1, 2, 3];
assert!(!a.is_empty());

1.0.0
[src]

Returns the first element of the slice, or None if it is empty.

Examples

let v = [10, 40, 30];
assert_eq!(Some(&10), v.first());

let w: &[i32] = &[];
assert_eq!(None, w.first());

1.0.0
[src]

Returns a mutable pointer to the first element of the slice, or None if it is empty.

Examples

let x = &mut [0, 1, 2];

if let Some(first) = x.first_mut() {
    *first = 5;
}
assert_eq!(x, &[5, 1, 2]);

1.5.0
[src]

Returns the first and all the rest of the elements of the slice, or None if it is empty.

Examples

let x = &[0, 1, 2];

if let Some((first, elements)) = x.split_first() {
    assert_eq!(first, &0);
    assert_eq!(elements, &[1, 2]);
}

1.5.0
[src]

Returns the first and all the rest of the elements of the slice, or None if it is empty.

Examples

let x = &mut [0, 1, 2];

if let Some((first, elements)) = x.split_first_mut() {
    *first = 3;
    elements[0] = 4;
    elements[1] = 5;
}
assert_eq!(x, &[3, 4, 5]);

1.5.0
[src]

Returns the last and all the rest of the elements of the slice, or None if it is empty.

Examples

let x = &[0, 1, 2];

if let Some((last, elements)) = x.split_last() {
    assert_eq!(last, &2);
    assert_eq!(elements, &[0, 1]);
}

1.5.0
[src]

Returns the last and all the rest of the elements of the slice, or None if it is empty.

Examples

let x = &mut [0, 1, 2];

if let Some((last, elements)) = x.split_last_mut() {
    *last = 3;
    elements[0] = 4;
    elements[1] = 5;
}
assert_eq!(x, &[4, 5, 3]);

1.0.0
[src]

Returns the last element of the slice, or None if it is empty.

Examples

let v = [10, 40, 30];
assert_eq!(Some(&30), v.last());

let w: &[i32] = &[];
assert_eq!(None, w.last());

1.0.0
[src]

Returns a mutable pointer to the last item in the slice.

Examples

let x = &mut [0, 1, 2];

if let Some(last) = x.last_mut() {
    *last = 10;
}
assert_eq!(x, &[0, 1, 10]);

1.0.0
[src]

Returns a reference to an element or subslice depending on the type of index.

  • If given a position, returns a reference to the element at that position or None if out of bounds.
  • If given a range, returns the subslice corresponding to that range, or None if out of bounds.

Examples

let v = [10, 40, 30];
assert_eq!(Some(&40), v.get(1));
assert_eq!(Some(&[10, 40][..]), v.get(0..2));
assert_eq!(None, v.get(3));
assert_eq!(None, v.get(0..4));

1.0.0
[src]

Returns a mutable reference to an element or subslice depending on the type of index (see get) or None if the index is out of bounds.

Examples

let x = &mut [0, 1, 2];

if let Some(elem) = x.get_mut(1) {
    *elem = 42;
}
assert_eq!(x, &[0, 42, 2]);

1.0.0
[src]

Returns a reference to an element or subslice, without doing bounds checking.

This is generally not recommended, use with caution! For a safe alternative see get.

Examples

let x = &[1, 2, 4];

unsafe {
    assert_eq!(x.get_unchecked(1), &2);
}

1.0.0
[src]

Returns a mutable reference to an element or subslice, without doing bounds checking.

This is generally not recommended, use with caution! For a safe alternative see get_mut.

Examples

let x = &mut [1, 2, 4];

unsafe {
    let elem = x.get_unchecked_mut(1);
    *elem = 13;
}
assert_eq!(x, &[1, 13, 4]);

1.0.0
[src]

Returns a raw pointer to the slice's buffer.

The caller must ensure that the slice outlives the pointer this function returns, or else it will end up pointing to garbage.

Modifying the container referenced by this slice may cause its buffer to be reallocated, which would also make any pointers to it invalid.

Examples

let x = &[1, 2, 4];
let x_ptr = x.as_ptr();

unsafe {
    for i in 0..x.len() {
        assert_eq!(x.get_unchecked(i), &*x_ptr.offset(i as isize));
    }
}

1.0.0
[src]

Returns an unsafe mutable pointer to the slice's buffer.

The caller must ensure that the slice outlives the pointer this function returns, or else it will end up pointing to garbage.

Modifying the container referenced by this slice may cause its buffer to be reallocated, which would also make any pointers to it invalid.

Examples

let x = &mut [1, 2, 4];
let x_ptr = x.as_mut_ptr();

unsafe {
    for i in 0..x.len() {
        *x_ptr.offset(i as isize) += 2;
    }
}
assert_eq!(x, &[3, 4, 6]);

1.0.0
[src]

Swaps two elements in the slice.

Arguments

  • a - The index of the first element
  • b - The index of the second element

Panics

Panics if a or b are out of bounds.

Examples

let mut v = ["a", "b", "c", "d"];
v.swap(1, 3);
assert!(v == ["a", "d", "c", "b"]);

1.0.0
[src]

Reverses the order of elements in the slice, in place.

Examples

let mut v = [1, 2, 3];
v.reverse();
assert!(v == [3, 2, 1]);

Important traits for Iter<'a, T>
1.0.0
[src]

Returns an iterator over the slice.

Examples

let x = &[1, 2, 4];
let mut iterator = x.iter();

assert_eq!(iterator.next(), Some(&1));
assert_eq!(iterator.next(), Some(&2));
assert_eq!(iterator.next(), Some(&4));
assert_eq!(iterator.next(), None);

Important traits for IterMut<'a, T>
1.0.0
[src]

Returns an iterator that allows modifying each value.

Examples

let x = &mut [1, 2, 4];
for elem in x.iter_mut() {
    *elem += 2;
}
assert_eq!(x, &[3, 4, 6]);

Important traits for Windows<'a, T>
1.0.0
[src]

Returns an iterator over all contiguous windows of length size. The windows overlap. If the slice is shorter than size, the iterator returns no values.

Panics

Panics if size is 0.

Examples

let slice = ['r', 'u', 's', 't'];
let mut iter = slice.windows(2);
assert_eq!(iter.next().unwrap(), &['r', 'u']);
assert_eq!(iter.next().unwrap(), &['u', 's']);
assert_eq!(iter.next().unwrap(), &['s', 't']);
assert!(iter.next().is_none());

If the slice is shorter than size:

let slice = ['f', 'o', 'o'];
let mut iter = slice.windows(4);
assert!(iter.next().is_none());

Important traits for Chunks<'a, T>
1.0.0
[src]

Returns an iterator over chunk_size elements of the slice at a time. The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length chunk_size.

See exact_chunks for a variant of this iterator that returns chunks of always exactly chunk_size elements.

Panics

Panics if chunk_size is 0.

Examples

let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.chunks(2);
assert_eq!(iter.next().unwrap(), &['l', 'o']);
assert_eq!(iter.next().unwrap(), &['r', 'e']);
assert_eq!(iter.next().unwrap(), &['m']);
assert!(iter.next().is_none());

Important traits for ExactChunks<'a, T>
[src]

🔬 This is a nightly-only experimental API. (exact_chunks)

Returns an iterator over chunk_size elements of the slice at a time. The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size-1 elements will be omitted.

Due to each chunk having exactly chunk_size elements, the compiler can often optimize the resulting code better than in the case of chunks.

Panics

Panics if chunk_size is 0.

Examples

#![feature(exact_chunks)]

let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.exact_chunks(2);
assert_eq!(iter.next().unwrap(), &['l', 'o']);
assert_eq!(iter.next().unwrap(), &['r', 'e']);
assert!(iter.next().is_none());

Important traits for ChunksMut<'a, T>
1.0.0
[src]

Returns an iterator over chunk_size elements of the slice at a time. The chunks are mutable slices, and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length chunk_size.

See exact_chunks_mut for a variant of this iterator that returns chunks of always exactly chunk_size elements.

Panics

Panics if chunk_size is 0.

Examples

let v = &mut [0, 0, 0, 0, 0];
let mut count = 1;

for chunk in v.chunks_mut(2) {
    for elem in chunk.iter_mut() {
        *elem += count;
    }
    count += 1;
}
assert_eq!(v, &[1, 1, 2, 2, 3]);

Important traits for ExactChunksMut<'a, T>
[src]

🔬 This is a nightly-only experimental API. (exact_chunks)

Returns an iterator over chunk_size elements of the slice at a time. The chunks are mutable slices, and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size-1 elements will be omitted.

Due to each chunk having exactly chunk_size elements, the compiler can often optimize the resulting code better than in the case of chunks_mut.

Panics

Panics if chunk_size is 0.

Examples

#![feature(exact_chunks)]

let v = &mut [0, 0, 0, 0, 0];
let mut count = 1;

for chunk in v.exact_chunks_mut(2) {
    for elem in chunk.iter_mut() {
        *elem += count;
    }
    count += 1;
}
assert_eq!(v, &[1, 1, 2, 2, 0]);

1.0.0
[src]

Divides one slice into two at an index.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Panics

Panics if mid > len.

Examples

let v = [1, 2, 3, 4, 5, 6];

{
   let (left, right) = v.split_at(0);
   assert!(left == []);
   assert!(right == [1, 2, 3, 4, 5, 6]);
}

{
    let (left, right) = v.split_at(2);
    assert!(left == [1, 2]);
    assert!(right == [3, 4, 5, 6]);
}

{
    let (left, right) = v.split_at(6);
    assert!(left == [1, 2, 3, 4, 5, 6]);
    assert!(right == []);
}

1.0.0
[src]

Divides one mutable slice into two at an index.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Panics

Panics if mid > len.

Examples

let mut v = [1, 0, 3, 0, 5, 6];
// scoped to restrict the lifetime of the borrows
{
    let (left, right) = v.split_at_mut(2);
    assert!(left == [1, 0]);
    assert!(right == [3, 0, 5, 6]);
    left[1] = 2;
    right[1] = 4;
}
assert!(v == [1, 2, 3, 4, 5, 6]);

Important traits for Split<'a, T, P>
1.0.0
[src]

Returns an iterator over subslices separated by elements that match pred. The matched element is not contained in the subslices.

Examples

let slice = [10, 40, 33, 20];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10, 40]);
assert_eq!(iter.next().unwrap(), &[20]);
assert!(iter.next().is_none());

If the first element is matched, an empty slice will be the first item returned by the iterator. Similarly, if the last element in the slice is matched, an empty slice will be the last item returned by the iterator:

let slice = [10, 40, 33];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10, 40]);
assert_eq!(iter.next().unwrap(), &[]);
assert!(iter.next().is_none());

If two matched elements are directly adjacent, an empty slice will be present between them:

let slice = [10, 6, 33, 20];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10]);
assert_eq!(iter.next().unwrap(), &[]);
assert_eq!(iter.next().unwrap(), &[20]);
assert!(iter.next().is_none());

Important traits for SplitMut<'a, T, P>
1.0.0
[src]

Returns an iterator over mutable subslices separated by elements that match pred. The matched element is not contained in the subslices.

Examples

let mut v = [10, 40, 30, 20, 60, 50];

for group in v.split_mut(|num| *num % 3 == 0) {
    group[0] = 1;
}
assert_eq!(v, [1, 40, 30, 1, 60, 1]);

Important traits for RSplit<'a, T, P>
[src]

🔬 This is a nightly-only experimental API. (slice_rsplit)

Returns an iterator over subslices separated by elements that match pred, starting at the end of the slice and working backwards. The matched element is not contained in the subslices.

Examples

#![feature(slice_rsplit)]

let slice = [11, 22, 33, 0, 44, 55];
let mut iter = slice.rsplit(|num| *num == 0);

assert_eq!(iter.next().unwrap(), &[44, 55]);
assert_eq!(iter.next().unwrap(), &[11, 22, 33]);
assert_eq!(iter.next(), None);

As with split(), if the first or last element is matched, an empty slice will be the first (or last) item returned by the iterator.

#![feature(slice_rsplit)]

let v = &[0, 1, 1, 2, 3, 5, 8];
let mut it = v.rsplit(|n| *n % 2 == 0);
assert_eq!(it.next().unwrap(), &[]);
assert_eq!(it.next().unwrap(), &[3, 5]);
assert_eq!(it.next().unwrap(), &[1, 1]);
assert_eq!(it.next().unwrap(), &[]);
assert_eq!(it.next(), None);

Important traits for RSplitMut<'a, T, P>
[src]

🔬 This is a nightly-only experimental API. (slice_rsplit)

Returns an iterator over mutable subslices separated by elements that match pred, starting at the end of the slice and working backwards. The matched element is not contained in the subslices.

Examples

#![feature(slice_rsplit)]

let mut v = [100, 400, 300, 200, 600, 500];

let mut count = 0;
for group in v.rsplit_mut(|num| *num % 3 == 0) {
    count += 1;
    group[0] = count;
}
assert_eq!(v, [3, 400, 300, 2, 600, 1]);

Important traits for SplitN<'a, T, P>
1.0.0
[src]

Returns an iterator over subslices separated by elements that match pred, limited to returning at most n items. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

Print the slice split once by numbers divisible by 3 (i.e. [10, 40], [20, 60, 50]):

let v = [10, 40, 30, 20, 60, 50];

for group in v.splitn(2, |num| *num % 3 == 0) {
    println!("{:?}", group);
}

Important traits for SplitNMut<'a, T, P>
1.0.0
[src]

Returns an iterator over subslices separated by elements that match pred, limited to returning at most n items. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

let mut v = [10, 40, 30, 20, 60, 50];

for group in v.splitn_mut(2, |num| *num % 3 == 0) {
    group[0] = 1;
}
assert_eq!(v, [1, 40, 30, 1, 60, 50]);

Important traits for RSplitN<'a, T, P>
1.0.0
[src]

Returns an iterator over subslices separated by elements that match pred limited to returning at most n items. This starts at the end of the slice and works backwards. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

Print the slice split once, starting from the end, by numbers divisible by 3 (i.e. [50], [10, 40, 30, 20]):

let v = [10, 40, 30, 20, 60, 50];

for group in v.rsplitn(2, |num| *num % 3 == 0) {
    println!("{:?}", group);
}

Important traits for RSplitNMut<'a, T, P>
1.0.0
[src]

Returns an iterator over subslices separated by elements that match pred limited to returning at most n items. This starts at the end of the slice and works backwards. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

let mut s = [10, 40, 30, 20, 60, 50];

for group in s.rsplitn_mut(2, |num| *num % 3 == 0) {
    group[0] = 1;
}
assert_eq!(s, [1, 40, 30, 20, 60, 1]);

1.0.0
[src]

Returns true if the slice contains an element with the given value.

Examples

let v = [10, 40, 30];
assert!(v.contains(&30));
assert!(!v.contains(&50));

1.0.0
[src]

Returns true if needle is a prefix of the slice.

Examples

let v = [10, 40, 30];
assert!(v.starts_with(&[10]));
assert!(v.starts_with(&[10, 40]));
assert!(!v.starts_with(&[50]));
assert!(!v.starts_with(&[10, 50]));

Always returns true if needle is an empty slice:

let v = &[10, 40, 30];
assert!(v.starts_with(&[]));
let v: &[u8] = &[];
assert!(v.starts_with(&[]));

1.0.0
[src]

Returns true if needle is a suffix of the slice.

Examples

let v = [10, 40, 30];
assert!(v.ends_with(&[30]));
assert!(v.ends_with(&[40, 30]));
assert!(!v.ends_with(&[50]));
assert!(!v.ends_with(&[50, 30]));

Always returns true if needle is an empty slice:

let v = &[10, 40, 30];
assert!(v.ends_with(&[]));
let v: &[u8] = &[];
assert!(v.ends_with(&[]));

Binary searches this sorted slice for a given element.

If the value is found then Ok is returned, containing the index of the matching element; if the value is not found then Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

Examples

Looks up a series of four elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];

assert_eq!(s.binary_search(&13),  Ok(9));
assert_eq!(s.binary_search(&4),   Err(7));
assert_eq!(s.binary_search(&100), Err(13));
let r = s.binary_search(&1);
assert!(match r { Ok(1...4) => true, _ => false, });

1.0.0
[src]

Binary searches this sorted slice with a comparator function.

The comparator function should implement an order consistent with the sort order of the underlying slice, returning an order code that indicates whether its argument is Less, Equal or Greater the desired target.

If a matching value is found then returns Ok, containing the index for the matched element; if no match is found then Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

Examples

Looks up a series of four elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];

let seek = 13;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Ok(9));
let seek = 4;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Err(7));
let seek = 100;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Err(13));
let seek = 1;
let r = s.binary_search_by(|probe| probe.cmp(&seek));
assert!(match r { Ok(1...4) => true, _ => false, });

1.10.0
[src]

Binary searches this sorted slice with a key extraction function.

Assumes that the slice is sorted by the key, for instance with sort_by_key using the same key extraction function.

If a matching value is found then returns Ok, containing the index for the matched element; if no match is found then Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

Examples

Looks up a series of four elements in a slice of pairs sorted by their second elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [(0, 0), (2, 1), (4, 1), (5, 1), (3, 1),
         (1, 2), (2, 3), (4, 5), (5, 8), (3, 13),
         (1, 21), (2, 34), (4, 55)];

assert_eq!(s.binary_search_by_key(&13, |&(a,b)| b),  Ok(9));
assert_eq!(s.binary_search_by_key(&4, |&(a,b)| b),   Err(7));
assert_eq!(s.binary_search_by_key(&100, |&(a,b)| b), Err(13));
let r = s.binary_search_by_key(&1, |&(a,b)| b);
assert!(match r { Ok(1...4) => true, _ => false, });

1.0.0
[src]

Sorts the slice.

This sort is stable (i.e. does not reorder equal elements) and O(n log n) worst-case.

When applicable, unstable sorting is preferred because it is generally faster than stable sorting and it doesn't allocate auxiliary memory. See sort_unstable.

Current implementation

The current algorithm is an adaptive, iterative merge sort inspired by timsort. It is designed to be very fast in cases where the slice is nearly sorted, or consists of two or more sorted sequences concatenated one after another.

Also, it allocates temporary storage half the size of self, but for short slices a non-allocating insertion sort is used instead.

Examples

let mut v = [-5, 4, 1, -3, 2];

v.sort();
assert!(v == [-5, -3, 1, 2, 4]);

1.0.0
[src]

Sorts the slice with a comparator function.

This sort is stable (i.e. does not reorder equal elements) and O(n log n) worst-case.

When applicable, unstable sorting is preferred because it is generally faster than stable sorting and it doesn't allocate auxiliary memory. See sort_unstable_by.

Current implementation

The current algorithm is an adaptive, iterative merge sort inspired by timsort. It is designed to be very fast in cases where the slice is nearly sorted, or consists of two or more sorted sequences concatenated one after another.

Also, it allocates temporary storage half the size of self, but for short slices a non-allocating insertion sort is used instead.

Examples

let mut v = [5, 4, 1, 3, 2];
v.sort_by(|a, b| a.cmp(b));
assert!(v == [1, 2, 3, 4, 5]);

// reverse sorting
v.sort_by(|a, b| b.cmp(a));
assert!(v == [5, 4, 3, 2, 1]);

1.7.0
[src]

Sorts the slice with a key extraction function.

This sort is stable (i.e. does not reorder equal elements) and O(n log n) worst-case.

When applicable, unstable sorting is preferred because it is generally faster than stable sorting and it doesn't allocate auxiliary memory. See sort_unstable_by_key.

Current implementation

The current algorithm is an adaptive, iterative merge sort inspired by timsort. It is designed to be very fast in cases where the slice is nearly sorted, or consists of two or more sorted sequences concatenated one after another.

Also, it allocates temporary storage half the size of self, but for short slices a non-allocating insertion sort is used instead.

Examples

let mut v = [-5i32, 4, 1, -3, 2];

v.sort_by_key(|k| k.abs());
assert!(v == [1, 2, -3, 4, -5]);

1.20.0
[src]

Sorts the slice, but may not preserve the order of equal elements.

This sort is unstable (i.e. may reorder equal elements), in-place (i.e. does not allocate), and O(n log n) worst-case.

Current implementation

The current algorithm is based on pattern-defeating quicksort by Orson Peters, which combines the fast average case of randomized quicksort with the fast worst case of heapsort, while achieving linear time on slices with certain patterns. It uses some randomization to avoid degenerate cases, but with a fixed seed to always provide deterministic behavior.

It is typically faster than stable sorting, except in a few special cases, e.g. when the slice consists of several concatenated sorted sequences.

Examples

let mut v = [-5, 4, 1, -3, 2];

v.sort_unstable();
assert!(v == [-5, -3, 1, 2, 4]);

1.20.0
[src]

Sorts the slice with a comparator function, but may not preserve the order of equal elements.

This sort is unstable (i.e. may reorder equal elements), in-place (i.e. does not allocate), and O(n log n) worst-case.

Current implementation

The current algorithm is based on pattern-defeating quicksort by Orson Peters, which combines the fast average case of randomized quicksort with the fast worst case of heapsort, while achieving linear time on slices with certain patterns. It uses some randomization to avoid degenerate cases, but with a fixed seed to always provide deterministic behavior.

It is typically faster than stable sorting, except in a few special cases, e.g. when the slice consists of several concatenated sorted sequences.

Examples

let mut v = [5, 4, 1, 3, 2];
v.sort_unstable_by(|a, b| a.cmp(b));
assert!(v == [1, 2, 3, 4, 5]);

// reverse sorting
v.sort_unstable_by(|a, b| b.cmp(a));
assert!(v == [5, 4, 3, 2, 1]);

1.20.0
[src]

Sorts the slice with a key extraction function, but may not preserve the order of equal elements.

This sort is unstable (i.e. may reorder equal elements), in-place (i.e. does not allocate), and O(n log n) worst-case.

Current implementation

The current algorithm is based on pattern-defeating quicksort by Orson Peters, which combines the fast average case of randomized quicksort with the fast worst case of heapsort, while achieving linear time on slices with certain patterns. It uses some randomization to avoid degenerate cases, but with a fixed seed to always provide deterministic behavior.

It is typically faster than stable sorting, except in a few special cases, e.g. when the slice consists of several concatenated sorted sequences.

Examples

let mut v = [-5i32, 4, 1, -3, 2];

v.sort_unstable_by_key(|k| k.abs());
assert!(v == [1, 2, -3, 4, -5]);

[src]

🔬 This is a nightly-only experimental API. (slice_rotate)

Rotates the slice in-place such that the first mid elements of the slice move to the end while the last self.len() - mid elements move to the front. After calling rotate_left, the element previously at index mid will become the first element in the slice.

Panics

This function will panic if mid is greater than the length of the slice. Note that mid == self.len() does not panic and is a no-op rotation.

Complexity

Takes linear (in self.len()) time.

Examples

#![feature(slice_rotate)]

let mut a = ['a', 'b', 'c', 'd', 'e', 'f'];
a.rotate_left(2);
assert_eq!(a, ['c', 'd', 'e', 'f', 'a', 'b']);

Rotating a subslice:

#![feature(slice_rotate)]

let mut a = ['a', 'b', 'c', 'd', 'e', 'f'];
a[1..5].rotate_left(1);
assert_eq!(a, ['a', 'c', 'd', 'e', 'b', 'f']);

[src]

🔬 This is a nightly-only experimental API. (slice_rotate)

[src]

🔬 This is a nightly-only experimental API. (slice_rotate)

Rotates the slice in-place such that the first self.len() - k elements of the slice move to the end while the last k elements move to the front. After calling rotate_right, the element previously at index self.len() - k will become the first element in the slice.

Panics

This function will panic if k is greater than the length of the slice. Note that k == self.len() does not panic and is a no-op rotation.

Complexity

Takes linear (in self.len()) time.

Examples

#![feature(slice_rotate)]

let mut a = ['a', 'b', 'c', 'd', 'e', 'f'];
a.rotate_right(2);
assert_eq!(a, ['e', 'f', 'a', 'b', 'c', 'd']);

Rotate a subslice:

#![feature(slice_rotate)]

let mut a = ['a', 'b', 'c', 'd', 'e', 'f'];
a[1..5].rotate_right(1);
assert_eq!(a, ['a', 'e', 'b', 'c', 'd', 'f']);

1.7.0
[src]

Copies the elements from src into self.

The length of src must be the same as self.

If src implements Copy, it can be more performant to use copy_from_slice.

Panics

This function will panic if the two slices have different lengths.

Examples

Cloning two elements from a slice into another:

let src = [1, 2, 3, 4];
let mut dst = [0, 0];

dst.clone_from_slice(&src[2..]);

assert_eq!(src, [1, 2, 3, 4]);
assert_eq!(dst, [3, 4]);

Rust enforces that there can only be one mutable reference with no immutable references to a particular piece of data in a particular scope. Because of this, attempting to use clone_from_slice on a single slice will result in a compile failure:

This example deliberately fails to compile
let mut slice = [1, 2, 3, 4, 5];

slice[..2].clone_from_slice(&slice[3..]); // compile fail!

To work around this, we can use split_at_mut to create two distinct sub-slices from a slice:

let mut slice = [1, 2, 3, 4, 5];

{
    let (left, right) = slice.split_at_mut(2);
    left.clone_from_slice(&right[1..]);
}

assert_eq!(slice, [4, 5, 3, 4, 5]);

1.9.0
[src]

Copies all elements from src into self, using a memcpy.

The length of src must be the same as self.

If src does not implement Copy, use clone_from_slice.

Panics

This function will panic if the two slices have different lengths.

Examples

Copying two elements from a slice into another:

let src = [1, 2, 3, 4];
let mut dst = [0, 0];

dst.copy_from_slice(&src[2..]);

assert_eq!(src, [1, 2, 3, 4]);
assert_eq!(dst, [3, 4]);

Rust enforces that there can only be one mutable reference with no immutable references to a particular piece of data in a particular scope. Because of this, attempting to use copy_from_slice on a single slice will result in a compile failure:

This example deliberately fails to compile
let mut slice = [1, 2, 3, 4, 5];

slice[..2].copy_from_slice(&slice[3..]); // compile fail!

To work around this, we can use split_at_mut to create two distinct sub-slices from a slice:

let mut slice = [1, 2, 3, 4, 5];

{
    let (left, right) = slice.split_at_mut(2);
    left.copy_from_slice(&right[1..]);
}

assert_eq!(slice, [4, 5, 3, 4, 5]);

[src]

🔬 This is a nightly-only experimental API. (swap_with_slice)

Swaps all elements in self with those in other.

The length of other must be the same as self.

Panics

This function will panic if the two slices have different lengths.

Example

Swapping two elements across slices:

#![feature(swap_with_slice)]

let mut slice1 = [0, 0];
let mut slice2 = [1, 2, 3, 4];

slice1.swap_with_slice(&mut slice2[2..]);

assert_eq!(slice1, [3, 4]);
assert_eq!(slice2, [1, 2, 0, 0]);

Rust enforces that there can only be one mutable reference to a particular piece of data in a particular scope. Because of this, attempting to use swap_with_slice on a single slice will result in a compile failure:

This example deliberately fails to compile
#![feature(swap_with_slice)]

let mut slice = [1, 2, 3, 4, 5];
slice[..2].swap_with_slice(&mut slice[3..]); // compile fail!

To work around this, we can use split_at_mut to create two distinct mutable sub-slices from a slice:

#![feature(swap_with_slice)]

let mut slice = [1, 2, 3, 4, 5];

{
    let (left, right) = slice.split_at_mut(2);
    left.swap_with_slice(&mut right[1..]);
}

assert_eq!(slice, [4, 5, 3, 1, 2]);

Important traits for Vec<u8>
1.0.0
[src]

Copies self into a new Vec.

Examples

let s = [10, 40, 30];
let x = s.to_vec();
// Here, `s` and `x` can be modified independently.

1.23.0
[src]

Checks if all bytes in this slice are within the ASCII range.

Important traits for Vec<u8>
1.23.0
[src]

Returns a vector containing a copy of this slice where each byte is mapped to its ASCII upper case equivalent.

ASCII letters 'a' to 'z' are mapped to 'A' to 'Z', but non-ASCII letters are unchanged.

To uppercase the value in-place, use make_ascii_uppercase.

Important traits for Vec<u8>
1.23.0
[src]

Returns a vector containing a copy of this slice where each byte is mapped to its ASCII lower case equivalent.

ASCII letters 'A' to 'Z' are mapped to 'a' to 'z', but non-ASCII letters are unchanged.

To lowercase the value in-place, use make_ascii_lowercase.

1.23.0
[src]

Checks that two slices are an ASCII case-insensitive match.

Same as to_ascii_lowercase(a) == to_ascii_lowercase(b), but without allocating and copying temporaries.

1.23.0
[src]

Converts this slice to its ASCII upper case equivalent in-place.

ASCII letters 'a' to 'z' are mapped to 'A' to 'Z', but non-ASCII letters are unchanged.

To return a new uppercased value without modifying the existing one, use to_ascii_uppercase.

1.23.0
[src]

Converts this slice to its ASCII lower case equivalent in-place.

ASCII letters 'A' to 'Z' are mapped to 'a' to 'z', but non-ASCII letters are unchanged.

To return a new lowercased value without modifying the existing one, use to_ascii_lowercase.

Trait Implementations

impl FromBuf for BytesMut
[src]

[src]

Creates a value from a buffer. Read more

impl From<BytesMut> for Bytes
[src]

[src]

Performs the conversion.

impl FromIterator<u8> for BytesMut
[src]

[src]

Creates a value from an iterator. Read more

impl BufMut for BytesMut
[src]

[src]

Returns the number of bytes that can be written from the current position until the end of the buffer is reached. Read more

[src]

Advance the internal cursor of the BufMut Read more

Important traits for &'a [u8]
[src]

Returns a mutable slice starting at the current BufMut position and of length between 0 and BufMut::remaining_mut(). Read more

[src]

Transfer bytes into self from src and advance the cursor by the number of bytes written. Read more

[src]

Writes an unsigned 8 bit integer to self. Read more

[src]

Writes a signed 8 bit integer to self. Read more

[src]

Returns true if there is space in self for more bytes. Read more

[src]

Fills dst with potentially multiple mutable slices starting at self's current position. Read more

[src]

Transfer bytes into self from src and advance the cursor by the number of bytes written. Read more

[src]

Writes an unsigned 16 bit integer to self in big-endian byte order. Read more

[src]

Writes an unsigned 16 bit integer to self in little-endian byte order. Read more

[src]

Writes a signed 16 bit integer to self in big-endian byte order. Read more

[src]

Writes a signed 16 bit integer to self in little-endian byte order. Read more

[src]

Writes an unsigned 32 bit integer to self in big-endian byte order. Read more

[src]

Writes an unsigned 32 bit integer to self in little-endian byte order. Read more

[src]

Writes a signed 32 bit integer to self in big-endian byte order. Read more

[src]

Writes a signed 32 bit integer to self in little-endian byte order. Read more

[src]

Writes an unsigned 64 bit integer to self in the big-endian byte order. Read more

[src]

Writes an unsigned 64 bit integer to self in little-endian byte order. Read more

[src]

Writes a signed 64 bit integer to self in the big-endian byte order. Read more

[src]

Writes a signed 64 bit integer to self in little-endian byte order. Read more

[src]

Writes an unsigned n-byte integer to self in big-endian byte order. Read more

[src]

Writes an unsigned n-byte integer to self in the little-endian byte order. Read more

[src]

Writes a signed n-byte integer to self in big-endian byte order. Read more

[src]

Writes a signed n-byte integer to self in little-endian byte order. Read more

[src]

Writes an IEEE754 single-precision (4 bytes) floating point number to self in big-endian byte order. Read more

[src]

Writes an IEEE754 single-precision (4 bytes) floating point number to self in little-endian byte order. Read more

[src]

Writes an IEEE754 double-precision (8 bytes) floating point number to self in big-endian byte order. Read more

[src]

Writes an IEEE754 double-precision (8 bytes) floating point number to self in little-endian byte order. Read more

Important traits for &'a mut R
[src]

Creates a "by reference" adaptor for this instance of BufMut. Read more

Important traits for Writer<B>
[src]

Creates an adaptor which implements the Write trait for self. Read more

impl IntoBuf for BytesMut
[src]

The Buf type that self is being converted into

[src]

Creates a Buf from a value. Read more

impl<'a> IntoBuf for &'a BytesMut
[src]

The Buf type that self is being converted into

[src]

Creates a Buf from a value. Read more

impl AsRef<[u8]> for BytesMut
[src]

Important traits for &'a [u8]
[src]

Performs the conversion.

impl Deref for BytesMut
[src]

The resulting type after dereferencing.

Important traits for &'a [u8]
[src]

Dereferences the value.

impl AsMut<[u8]> for BytesMut
[src]

Important traits for &'a [u8]
[src]

Performs the conversion.

impl DerefMut for BytesMut
[src]

Important traits for &'a [u8]
[src]

Mutably dereferences the value.

impl From<Vec<u8>> for BytesMut
[src]

[src]

Performs the conversion.

impl From<String> for BytesMut
[src]

[src]

Performs the conversion.

impl<'a> From<&'a [u8]> for BytesMut
[src]

[src]

Performs the conversion.

impl<'a> From<&'a str> for BytesMut
[src]

[src]

Performs the conversion.

impl From<Bytes> for BytesMut
[src]

[src]

Performs the conversion.

impl PartialEq for BytesMut
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl PartialOrd for BytesMut
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl Ord for BytesMut
[src]

[src]

This method returns an Ordering between self and other. Read more

1.21.0
[src]

Compares and returns the maximum of two values. Read more

1.21.0
[src]

Compares and returns the minimum of two values. Read more

impl Eq for BytesMut
[src]

impl Default for BytesMut
[src]

[src]

Returns the "default value" for a type. Read more

impl Debug for BytesMut
[src]

[src]

Formats the value using the given formatter. Read more

impl Hash for BytesMut
[src]

[src]

Feeds this value into the given [Hasher]. Read more

1.3.0
[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl Borrow<[u8]> for BytesMut
[src]

Important traits for &'a [u8]
[src]

Immutably borrows from an owned value. Read more

impl BorrowMut<[u8]> for BytesMut
[src]

Important traits for &'a [u8]
[src]

Mutably borrows from an owned value. Read more

impl Write for BytesMut
[src]

[src]

Writes a slice of bytes into this writer, returning whether the write succeeded. Read more

[src]

Glue for usage of the [write!] macro with implementors of this trait. Read more

1.1.0
[src]

Writes a [char] into this writer, returning whether the write succeeded. Read more

impl Clone for BytesMut
[src]

[src]

Returns a copy of the value. Read more

1.0.0
[src]

Performs copy-assignment from source. Read more

impl IntoIterator for BytesMut
[src]

The type of the elements being iterated over.

Which kind of iterator are we turning this into?

[src]

Creates an iterator from a value. Read more

impl<'a> IntoIterator for &'a BytesMut
[src]

The type of the elements being iterated over.

Which kind of iterator are we turning this into?

[src]

Creates an iterator from a value. Read more

impl Extend<u8> for BytesMut
[src]

[src]

Extends a collection with the contents of an iterator. Read more

impl<'a> Extend<&'a u8> for BytesMut
[src]

[src]

Extends a collection with the contents of an iterator. Read more

impl PartialEq<[u8]> for BytesMut
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl PartialOrd<[u8]> for BytesMut
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl PartialEq<BytesMut> for [u8]
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl PartialOrd<BytesMut> for [u8]
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl PartialEq<str> for BytesMut
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl PartialOrd<str> for BytesMut
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl PartialEq<BytesMut> for str
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl PartialOrd<BytesMut> for str
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl PartialEq<Vec<u8>> for BytesMut
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl PartialOrd<Vec<u8>> for BytesMut
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl PartialEq<BytesMut> for Vec<u8>
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl PartialOrd<BytesMut> for Vec<u8>
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl PartialEq<String> for BytesMut
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl PartialOrd<String> for BytesMut
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl PartialEq<BytesMut> for String
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl PartialOrd<BytesMut> for String
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<'a, T: ?Sized> PartialEq<&'a T> for BytesMut where
    BytesMut: PartialEq<T>, 
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl<'a, T: ?Sized> PartialOrd<&'a T> for BytesMut where
    BytesMut: PartialOrd<T>, 
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<'a> PartialEq<BytesMut> for &'a [u8]
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl<'a> PartialOrd<BytesMut> for &'a [u8]
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<'a> PartialEq<BytesMut> for &'a str
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl<'a> PartialOrd<BytesMut> for &'a str
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

1.0.0
[src]

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0
[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0
[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0
[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl PartialEq<BytesMut> for Bytes
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.

impl PartialEq<Bytes> for BytesMut
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0
[src]

This method tests for !=.