Struct chrono::Duration [] [src]

pub struct Duration { /* fields omitted */ }

ISO 8601 time duration with nanosecond precision. This also allows for the negative duration; see individual methods for details.

Methods

impl Duration
[src]

[src]

Makes a new Duration with given number of weeks. Equivalent to Duration::seconds(weeks * 7 * 24 * 60 * 60) with overflow checks. Panics when the duration is out of bounds.

[src]

Makes a new Duration with given number of days. Equivalent to Duration::seconds(days * 24 * 60 * 60) with overflow checks. Panics when the duration is out of bounds.

[src]

Makes a new Duration with given number of hours. Equivalent to Duration::seconds(hours * 60 * 60) with overflow checks. Panics when the duration is out of bounds.

[src]

Makes a new Duration with given number of minutes. Equivalent to Duration::seconds(minutes * 60) with overflow checks. Panics when the duration is out of bounds.

[src]

Makes a new Duration with given number of seconds. Panics when the duration is more than i64::MAX milliseconds or less than i64::MIN milliseconds.

[src]

Makes a new Duration with given number of milliseconds.

[src]

Makes a new Duration with given number of microseconds.

[src]

Makes a new Duration with given number of nanoseconds.

[src]

Runs a closure, returning the duration of time it took to run the closure.

[src]

Returns the total number of whole weeks in the duration.

[src]

Returns the total number of whole days in the duration.

[src]

Returns the total number of whole hours in the duration.

[src]

Returns the total number of whole minutes in the duration.

[src]

Returns the total number of whole seconds in the duration.

[src]

Returns the total number of whole milliseconds in the duration,

[src]

Returns the total number of whole microseconds in the duration, or None on overflow (exceeding 263 microseconds in either direction).

[src]

Returns the total number of whole nanoseconds in the duration, or None on overflow (exceeding 263 nanoseconds in either direction).

[src]

Add two durations, returning None if overflow occurred.

[src]

Subtract two durations, returning None if overflow occurred.

[src]

The minimum possible Duration: i64::MIN milliseconds.

[src]

The maximum possible Duration: i64::MAX milliseconds.

[src]

A duration where the stored seconds and nanoseconds are equal to zero.

[src]

Returns true if the duration equals Duration::zero().

[src]

Creates a time::Duration object from std::time::Duration

This function errors when original duration is larger than the maximum value supported for this type.

[src]

Creates a std::time::Duration object from time::Duration

This function errors when duration is less than zero. As standard library implementation is limited to non-negative values.

Trait Implementations

impl Sub<Duration> for SteadyTime
[src]

The resulting type after applying the - operator.

[src]

Performs the - operation.

impl Sub<Duration> for Timespec
[src]

The resulting type after applying the - operator.

[src]

Performs the - operation.

impl Sub<Duration> for Tm
[src]

The resulting type after applying the - operator.

[src]

The resulting Tm is in UTC.

impl Sub<Duration> for Duration
[src]

The resulting type after applying the - operator.

[src]

Performs the - operation.

impl PartialOrd<Duration> for Duration
[src]

[src]

This method returns an ordering between self and other values if one exists. Read more

[src]

This method tests less than (for self and other) and is used by the < operator. Read more

[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl Mul<i32> for Duration
[src]

The resulting type after applying the * operator.

[src]

Performs the * operation.

impl Debug for Duration
[src]

[src]

Formats the value using the given formatter. Read more

impl Copy for Duration
[src]

impl Clone for Duration
[src]

[src]

Returns a copy of the value. Read more

1.0.0
[src]

Performs copy-assignment from source. Read more

impl Div<i32> for Duration
[src]

The resulting type after applying the / operator.

[src]

Performs the / operation.

impl Ord for Duration
[src]

[src]

This method returns an Ordering between self and other. Read more

1.21.0
[src]

Compares and returns the maximum of two values. Read more

1.21.0
[src]

Compares and returns the minimum of two values. Read more

impl Eq for Duration
[src]

impl Display for Duration
[src]

[src]

Formats the value using the given formatter. Read more

impl Add<Duration> for SteadyTime
[src]

The resulting type after applying the + operator.

[src]

Performs the + operation.

impl Add<Duration> for Duration
[src]

The resulting type after applying the + operator.

[src]

Performs the + operation.

impl Add<Duration> for Tm
[src]

The resulting type after applying the + operator.

[src]

The resulting Tm is in UTC.

impl Add<Duration> for Timespec
[src]

The resulting type after applying the + operator.

[src]

Performs the + operation.

impl PartialEq<Duration> for Duration
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

[src]

This method tests for !=.

impl Neg for Duration
[src]

The resulting type after applying the - operator.

[src]

Performs the unary - operation.

impl Add<OldDuration> for NaiveDate
[src]

An addition of Duration to NaiveDate discards the fractional days, rounding to the closest integral number of days towards Duration::zero().

Panics on underflow or overflow. Use NaiveDate::checked_add_signed to detect that.

Example

use chrono::NaiveDate;
use time::Duration;

let from_ymd = NaiveDate::from_ymd;

assert_eq!(from_ymd(2014, 1, 1) + Duration::zero(),             from_ymd(2014, 1, 1));
assert_eq!(from_ymd(2014, 1, 1) + Duration::seconds(86399),     from_ymd(2014, 1, 1));
assert_eq!(from_ymd(2014, 1, 1) + Duration::seconds(-86399),    from_ymd(2014, 1, 1));
assert_eq!(from_ymd(2014, 1, 1) + Duration::days(1),            from_ymd(2014, 1, 2));
assert_eq!(from_ymd(2014, 1, 1) + Duration::days(-1),           from_ymd(2013, 12, 31));
assert_eq!(from_ymd(2014, 1, 1) + Duration::days(364),          from_ymd(2014, 12, 31));
assert_eq!(from_ymd(2014, 1, 1) + Duration::days(365*4 + 1),    from_ymd(2018, 1, 1));
assert_eq!(from_ymd(2014, 1, 1) + Duration::days(365*400 + 97), from_ymd(2414, 1, 1));

The resulting type after applying the + operator.

[src]

Performs the + operation.

impl AddAssign<OldDuration> for NaiveDate
[src]

[src]

Performs the += operation.

impl Sub<OldDuration> for NaiveDate
[src]

A subtraction of Duration from NaiveDate discards the fractional days, rounding to the closest integral number of days towards Duration::zero(). It is same to the addition with a negated Duration.

Panics on underflow or overflow. Use NaiveDate::checked_sub_signed to detect that.

Example

use chrono::NaiveDate;
use time::Duration;

let from_ymd = NaiveDate::from_ymd;

assert_eq!(from_ymd(2014, 1, 1) - Duration::zero(),             from_ymd(2014, 1, 1));
assert_eq!(from_ymd(2014, 1, 1) - Duration::seconds(86399),     from_ymd(2014, 1, 1));
assert_eq!(from_ymd(2014, 1, 1) - Duration::seconds(-86399),    from_ymd(2014, 1, 1));
assert_eq!(from_ymd(2014, 1, 1) - Duration::days(1),            from_ymd(2013, 12, 31));
assert_eq!(from_ymd(2014, 1, 1) - Duration::days(-1),           from_ymd(2014, 1, 2));
assert_eq!(from_ymd(2014, 1, 1) - Duration::days(364),          from_ymd(2013, 1, 2));
assert_eq!(from_ymd(2014, 1, 1) - Duration::days(365*4 + 1),    from_ymd(2010, 1, 1));
assert_eq!(from_ymd(2014, 1, 1) - Duration::days(365*400 + 97), from_ymd(1614, 1, 1));

The resulting type after applying the - operator.

[src]

Performs the - operation.

impl SubAssign<OldDuration> for NaiveDate
[src]

[src]

Performs the -= operation.

impl Add<OldDuration> for NaiveTime
[src]

An addition of Duration to NaiveTime wraps around and never overflows or underflows. In particular the addition ignores integral number of days.

As a part of Chrono's leap second handling, the addition assumes that there is no leap second ever, except when the NaiveTime itself represents a leap second in which case the assumption becomes that there is exactly a single leap second ever.

Example

use chrono::NaiveTime;
use time::Duration;

let from_hmsm = NaiveTime::from_hms_milli;

assert_eq!(from_hmsm(3, 5, 7, 0) + Duration::zero(),                  from_hmsm(3, 5, 7, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) + Duration::seconds(1),              from_hmsm(3, 5, 8, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) + Duration::seconds(-1),             from_hmsm(3, 5, 6, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) + Duration::seconds(60 + 4),         from_hmsm(3, 6, 11, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) + Duration::seconds(7*60*60 - 6*60), from_hmsm(9, 59, 7, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) + Duration::milliseconds(80),        from_hmsm(3, 5, 7, 80));
assert_eq!(from_hmsm(3, 5, 7, 950) + Duration::milliseconds(280),     from_hmsm(3, 5, 8, 230));
assert_eq!(from_hmsm(3, 5, 7, 950) + Duration::milliseconds(-980),    from_hmsm(3, 5, 6, 970));

The addition wraps around.

assert_eq!(from_hmsm(3, 5, 7, 0) + Duration::seconds(22*60*60), from_hmsm(1, 5, 7, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) + Duration::seconds(-8*60*60), from_hmsm(19, 5, 7, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) + Duration::days(800),         from_hmsm(3, 5, 7, 0));

Leap seconds are handled, but the addition assumes that it is the only leap second happened.

let leap = from_hmsm(3, 5, 59, 1_300);
assert_eq!(leap + Duration::zero(),             from_hmsm(3, 5, 59, 1_300));
assert_eq!(leap + Duration::milliseconds(-500), from_hmsm(3, 5, 59, 800));
assert_eq!(leap + Duration::milliseconds(500),  from_hmsm(3, 5, 59, 1_800));
assert_eq!(leap + Duration::milliseconds(800),  from_hmsm(3, 6, 0, 100));
assert_eq!(leap + Duration::seconds(10),        from_hmsm(3, 6, 9, 300));
assert_eq!(leap + Duration::seconds(-10),       from_hmsm(3, 5, 50, 300));
assert_eq!(leap + Duration::days(1),            from_hmsm(3, 5, 59, 300));

The resulting type after applying the + operator.

[src]

Performs the + operation.

impl AddAssign<OldDuration> for NaiveTime
[src]

[src]

Performs the += operation.

impl Sub<OldDuration> for NaiveTime
[src]

A subtraction of Duration from NaiveTime wraps around and never overflows or underflows. In particular the addition ignores integral number of days. It is same to the addition with a negated Duration.

As a part of Chrono's leap second handling, the addition assumes that there is no leap second ever, except when the NaiveTime itself represents a leap second in which case the assumption becomes that there is exactly a single leap second ever.

Example

use chrono::NaiveTime;
use time::Duration;

let from_hmsm = NaiveTime::from_hms_milli;

assert_eq!(from_hmsm(3, 5, 7, 0) - Duration::zero(),                  from_hmsm(3, 5, 7, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) - Duration::seconds(1),              from_hmsm(3, 5, 6, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) - Duration::seconds(60 + 5),         from_hmsm(3, 4, 2, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) - Duration::seconds(2*60*60 + 6*60), from_hmsm(0, 59, 7, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) - Duration::milliseconds(80),        from_hmsm(3, 5, 6, 920));
assert_eq!(from_hmsm(3, 5, 7, 950) - Duration::milliseconds(280),     from_hmsm(3, 5, 7, 670));

The subtraction wraps around.

assert_eq!(from_hmsm(3, 5, 7, 0) - Duration::seconds(8*60*60), from_hmsm(19, 5, 7, 0));
assert_eq!(from_hmsm(3, 5, 7, 0) - Duration::days(800),        from_hmsm(3, 5, 7, 0));

Leap seconds are handled, but the subtraction assumes that it is the only leap second happened.

let leap = from_hmsm(3, 5, 59, 1_300);
assert_eq!(leap - Duration::zero(),            from_hmsm(3, 5, 59, 1_300));
assert_eq!(leap - Duration::milliseconds(200), from_hmsm(3, 5, 59, 1_100));
assert_eq!(leap - Duration::milliseconds(500), from_hmsm(3, 5, 59, 800));
assert_eq!(leap - Duration::seconds(60),       from_hmsm(3, 5, 0, 300));
assert_eq!(leap - Duration::days(1),           from_hmsm(3, 6, 0, 300));

The resulting type after applying the - operator.

[src]

Performs the - operation.

impl SubAssign<OldDuration> for NaiveTime
[src]

[src]

Performs the -= operation.

impl Add<OldDuration> for NaiveDateTime
[src]

An addition of Duration to NaiveDateTime yields another NaiveDateTime.

As a part of Chrono's leap second handling, the addition assumes that there is no leap second ever, except when the NaiveDateTime itself represents a leap second in which case the assumption becomes that there is exactly a single leap second ever.

Panics on underflow or overflow. Use NaiveDateTime::checked_add_signed to detect that.

Example

use chrono::NaiveDate;
use time::Duration;

let from_ymd = NaiveDate::from_ymd;

let d = from_ymd(2016, 7, 8);
let hms = |h, m, s| d.and_hms(h, m, s);
assert_eq!(hms(3, 5, 7) + Duration::zero(),             hms(3, 5, 7));
assert_eq!(hms(3, 5, 7) + Duration::seconds(1),         hms(3, 5, 8));
assert_eq!(hms(3, 5, 7) + Duration::seconds(-1),        hms(3, 5, 6));
assert_eq!(hms(3, 5, 7) + Duration::seconds(3600 + 60), hms(4, 6, 7));
assert_eq!(hms(3, 5, 7) + Duration::seconds(86_400),
           from_ymd(2016, 7, 9).and_hms(3, 5, 7));
assert_eq!(hms(3, 5, 7) + Duration::days(365),
           from_ymd(2017, 7, 8).and_hms(3, 5, 7));

let hmsm = |h, m, s, milli| d.and_hms_milli(h, m, s, milli);
assert_eq!(hmsm(3, 5, 7, 980) + Duration::milliseconds(450), hmsm(3, 5, 8, 430));

Leap seconds are handled, but the addition assumes that it is the only leap second happened.

let leap = hmsm(3, 5, 59, 1_300);
assert_eq!(leap + Duration::zero(),             hmsm(3, 5, 59, 1_300));
assert_eq!(leap + Duration::milliseconds(-500), hmsm(3, 5, 59, 800));
assert_eq!(leap + Duration::milliseconds(500),  hmsm(3, 5, 59, 1_800));
assert_eq!(leap + Duration::milliseconds(800),  hmsm(3, 6, 0, 100));
assert_eq!(leap + Duration::seconds(10),        hmsm(3, 6, 9, 300));
assert_eq!(leap + Duration::seconds(-10),       hmsm(3, 5, 50, 300));
assert_eq!(leap + Duration::days(1),
           from_ymd(2016, 7, 9).and_hms_milli(3, 5, 59, 300));

The resulting type after applying the + operator.

[src]

Performs the + operation.

impl AddAssign<OldDuration> for NaiveDateTime
[src]

[src]

Performs the += operation.

impl Sub<OldDuration> for NaiveDateTime
[src]

A subtraction of Duration from NaiveDateTime yields another NaiveDateTime. It is same to the addition with a negated Duration.

As a part of Chrono's leap second handling, the addition assumes that there is no leap second ever, except when the NaiveDateTime itself represents a leap second in which case the assumption becomes that there is exactly a single leap second ever.

Panics on underflow or overflow. Use NaiveDateTime::checked_sub_signed to detect that.

Example

use chrono::NaiveDate;
use time::Duration;

let from_ymd = NaiveDate::from_ymd;

let d = from_ymd(2016, 7, 8);
let hms = |h, m, s| d.and_hms(h, m, s);
assert_eq!(hms(3, 5, 7) - Duration::zero(),             hms(3, 5, 7));
assert_eq!(hms(3, 5, 7) - Duration::seconds(1),         hms(3, 5, 6));
assert_eq!(hms(3, 5, 7) - Duration::seconds(-1),        hms(3, 5, 8));
assert_eq!(hms(3, 5, 7) - Duration::seconds(3600 + 60), hms(2, 4, 7));
assert_eq!(hms(3, 5, 7) - Duration::seconds(86_400),
           from_ymd(2016, 7, 7).and_hms(3, 5, 7));
assert_eq!(hms(3, 5, 7) - Duration::days(365),
           from_ymd(2015, 7, 9).and_hms(3, 5, 7));

let hmsm = |h, m, s, milli| d.and_hms_milli(h, m, s, milli);
assert_eq!(hmsm(3, 5, 7, 450) - Duration::milliseconds(670), hmsm(3, 5, 6, 780));

Leap seconds are handled, but the subtraction assumes that it is the only leap second happened.

let leap = hmsm(3, 5, 59, 1_300);
assert_eq!(leap - Duration::zero(),            hmsm(3, 5, 59, 1_300));
assert_eq!(leap - Duration::milliseconds(200), hmsm(3, 5, 59, 1_100));
assert_eq!(leap - Duration::milliseconds(500), hmsm(3, 5, 59, 800));
assert_eq!(leap - Duration::seconds(60),       hmsm(3, 5, 0, 300));
assert_eq!(leap - Duration::days(1),
           from_ymd(2016, 7, 7).and_hms_milli(3, 6, 0, 300));

The resulting type after applying the - operator.

[src]

Performs the - operation.

impl SubAssign<OldDuration> for NaiveDateTime
[src]

[src]

Performs the -= operation.

impl<Tz: TimeZone> Add<OldDuration> for Date<Tz>
[src]

The resulting type after applying the + operator.

[src]

Performs the + operation.

impl<Tz: TimeZone> Sub<OldDuration> for Date<Tz>
[src]

The resulting type after applying the - operator.

[src]

Performs the - operation.

impl<Tz: TimeZone> Add<OldDuration> for DateTime<Tz>
[src]

The resulting type after applying the + operator.

[src]

Performs the + operation.

impl<Tz: TimeZone> Sub<OldDuration> for DateTime<Tz>
[src]

The resulting type after applying the - operator.

[src]

Performs the - operation.