Trait net2::UdpSocketExt

pub trait UdpSocketExt {
    fn set_recv_buffer_size(&self, size: usize) -> Result<()>;
    fn recv_buffer_size(&self) -> Result<usize>;
    fn set_send_buffer_size(&self, size: usize) -> Result<()>;
    fn send_buffer_size(&self) -> Result<usize>;
    fn set_broadcast(&self, broadcast: bool) -> Result<()>;
    fn broadcast(&self) -> Result<bool>;
    fn set_multicast_loop_v4(&self, multicast_loop_v4: bool) -> Result<()>;
    fn multicast_loop_v4(&self) -> Result<bool>;
    fn set_multicast_ttl_v4(&self, multicast_ttl_v4: u32) -> Result<()>;
    fn multicast_ttl_v4(&self) -> Result<u32>;
    fn set_multicast_hops_v6(&self, hops: u32) -> Result<()>;
    fn multicast_hops_v6(&self) -> Result<u32>;
    fn set_multicast_loop_v6(&self, multicast_loop_v6: bool) -> Result<()>;
    fn multicast_loop_v6(&self) -> Result<bool>;
    fn set_multicast_if_v4(&self, interface: &Ipv4Addr) -> Result<()>;
    fn multicast_if_v4(&self) -> Result<Ipv4Addr>;
    fn set_multicast_if_v6(&self, interface: u32) -> Result<()>;
    fn multicast_if_v6(&self) -> Result<u32>;
    fn set_ttl(&self, ttl: u32) -> Result<()>;
    fn ttl(&self) -> Result<u32>;
    fn set_unicast_hops_v6(&self, ttl: u32) -> Result<()>;
    fn unicast_hops_v6(&self) -> Result<u32>;
    fn set_only_v6(&self, only_v6: bool) -> Result<()>;
    fn only_v6(&self) -> Result<bool>;
    fn join_multicast_v4(
        &self, 
        multiaddr: &Ipv4Addr, 
        interface: &Ipv4Addr
    ) -> Result<()>;
    fn join_multicast_v6(
        &self, 
        multiaddr: &Ipv6Addr, 
        interface: u32
    ) -> Result<()>;
    fn leave_multicast_v4(
        &self, 
        multiaddr: &Ipv4Addr, 
        interface: &Ipv4Addr
    ) -> Result<()>;
    fn leave_multicast_v6(
        &self, 
        multiaddr: &Ipv6Addr, 
        interface: u32
    ) -> Result<()>;
    fn set_read_timeout_ms(&self, val: Option<u32>) -> Result<()>;
    fn set_read_timeout(&self, val: Option<Duration>) -> Result<()>;
    fn read_timeout_ms(&self) -> Result<Option<u32>>;
    fn read_timeout(&self) -> Result<Option<Duration>>;
    fn set_write_timeout_ms(&self, val: Option<u32>) -> Result<()>;
    fn set_write_timeout(&self, val: Option<Duration>) -> Result<()>;
    fn write_timeout_ms(&self) -> Result<Option<u32>>;
    fn write_timeout(&self) -> Result<Option<Duration>>;
    fn take_error(&self) -> Result<Option<Error>>;
    fn connect<A: ToSocketAddrs>(&self, addr: A) -> Result<()>;
    fn send(&self, buf: &[u8]) -> Result<usize>;
    fn recv(&self, buf: &mut [u8]) -> Result<usize>;
    fn set_nonblocking(&self, nonblocking: bool) -> Result<()>;
}

Extension methods for the standard UdpSocket type in std::net.

Required Methods

fn set_recv_buffer_size(&self, size: usize) -> Result<()>

Sets the value of the SO_RCVBUF option on this socket.

Changes the size of the operating system's receive buffer associated with the socket.

fn recv_buffer_size(&self) -> Result<usize>

Gets the value of the SO_RCVBUF option on this socket.

For more information about this option, see set_recv_buffer_size.

fn set_send_buffer_size(&self, size: usize) -> Result<()>

Sets the value of the SO_SNDBUF option on this socket.

Changes the size of the operating system's send buffer associated with the socket.

fn send_buffer_size(&self) -> Result<usize>

Gets the value of the SO_SNDBUF option on this socket.

For more information about this option, see set_send_buffer.

fn set_broadcast(&self, broadcast: bool) -> Result<()>

Sets the value of the SO_BROADCAST option for this socket.

When enabled, this socket is allowed to send packets to a broadcast address.

fn broadcast(&self) -> Result<bool>

Gets the value of the SO_BROADCAST option for this socket.

For more information about this option, see set_broadcast.

fn set_multicast_loop_v4(&self, multicast_loop_v4: bool) -> Result<()>

Sets the value of the IP_MULTICAST_LOOP option for this socket.

If enabled, multicast packets will be looped back to the local socket. Note that this may not have any affect on IPv6 sockets.

fn multicast_loop_v4(&self) -> Result<bool>

Gets the value of the IP_MULTICAST_LOOP option for this socket.

For more information about this option, see set_multicast_loop_v4.

fn set_multicast_ttl_v4(&self, multicast_ttl_v4: u32) -> Result<()>

Sets the value of the IP_MULTICAST_TTL option for this socket.

Indicates the time-to-live value of outgoing multicast packets for this socket. The default value is 1 which means that multicast packets don't leave the local network unless explicitly requested.

Note that this may not have any affect on IPv6 sockets.

fn multicast_ttl_v4(&self) -> Result<u32>

Gets the value of the IP_MULTICAST_TTL option for this socket.

For more information about this option, see set_multicast_ttl_v4.

fn set_multicast_hops_v6(&self, hops: u32) -> Result<()>

Sets the value of the IPV6_MULTICAST_HOPS option for this socket

fn multicast_hops_v6(&self) -> Result<u32>

Gets the value of the IPV6_MULTICAST_HOPS option for this socket

fn set_multicast_loop_v6(&self, multicast_loop_v6: bool) -> Result<()>

Sets the value of the IPV6_MULTICAST_LOOP option for this socket.

Controls whether this socket sees the multicast packets it sends itself. Note that this may not have any affect on IPv4 sockets.

fn multicast_loop_v6(&self) -> Result<bool>

Gets the value of the IPV6_MULTICAST_LOOP option for this socket.

For more information about this option, see set_multicast_loop_v6.

fn set_multicast_if_v4(&self, interface: &Ipv4Addr) -> Result<()>

Sets the value of the IP_MULTICAST_IF option for this socket.

Specifies the interface to use for routing multicast packets.

fn multicast_if_v4(&self) -> Result<Ipv4Addr>

Gets the value of the IP_MULTICAST_IF option for this socket.

Returns the interface to use for routing multicast packets.

fn set_multicast_if_v6(&self, interface: u32) -> Result<()>

Sets the value of the IPV6_MULTICAST_IF option for this socket.

Specifies the interface to use for routing multicast packets.

fn multicast_if_v6(&self) -> Result<u32>

Gets the value of the IPV6_MULTICAST_IF option for this socket.

Returns the interface to use for routing multicast packets.

fn set_ttl(&self, ttl: u32) -> Result<()>

Sets the value for the IP_TTL option on this socket.

This is the same as TcpStreamExt::set_ttl.

fn ttl(&self) -> Result<u32>

Gets the value of the IP_TTL option for this socket.

For more information about this option, see TcpStreamExt::set_ttl.

fn set_unicast_hops_v6(&self, ttl: u32) -> Result<()>

Sets the value for the IPV6_UNICAST_HOPS option on this socket.

Specifies the hop limit for ipv6 unicast packets

fn unicast_hops_v6(&self) -> Result<u32>

Gets the value of the IPV6_UNICAST_HOPS option for this socket.

Specifies the hop limit for ipv6 unicast packets

fn set_only_v6(&self, only_v6: bool) -> Result<()>

Sets the value for the IPV6_V6ONLY option on this socket.

For more information about this option, see TcpStreamExt::set_only_v6.

fn only_v6(&self) -> Result<bool>

Gets the value of the IPV6_V6ONLY option for this socket.

For more information about this option, see TcpStreamExt::set_only_v6.

fn join_multicast_v4(
    &self,
    multiaddr: &Ipv4Addr,
    interface: &Ipv4Addr
) -> Result<()>

Executes an operation of the IP_ADD_MEMBERSHIP type.

This function specifies a new multicast group for this socket to join. The address must be a valid multicast address, and interface is the address of the local interface with which the system should join the multicast group. If it's equal to INADDR_ANY then an appropriate interface is chosen by the system.

fn join_multicast_v6(&self, multiaddr: &Ipv6Addr, interface: u32) -> Result<()>

Executes an operation of the IPV6_ADD_MEMBERSHIP type.

This function specifies a new multicast group for this socket to join. The address must be a valid multicast address, and interface is the index of the interface to join/leave (or 0 to indicate any interface).

fn leave_multicast_v4(
    &self,
    multiaddr: &Ipv4Addr,
    interface: &Ipv4Addr
) -> Result<()>

Executes an operation of the IP_DROP_MEMBERSHIP type.

For more information about this option, see join_multicast_v4.

fn leave_multicast_v6(&self, multiaddr: &Ipv6Addr, interface: u32) -> Result<()>

Executes an operation of the IPV6_DROP_MEMBERSHIP type.

For more information about this option, see join_multicast_v6.

fn set_read_timeout_ms(&self, val: Option<u32>) -> Result<()>

Sets the SO_RCVTIMEO option for this socket.

This option specifies the timeout, in milliseconds, of how long calls to this socket's read function will wait before returning a timeout. A value of None means that no read timeout should be specified and otherwise Some indicates the number of milliseconds for the timeout.

fn set_read_timeout(&self, val: Option<Duration>) -> Result<()>

Sets the SO_RCVTIMEO option for this socket.

This option specifies the timeout of how long calls to this socket's read function will wait before returning a timeout. A value of None means that no read timeout should be specified and otherwise Some indicates the number of duration of the timeout.

fn read_timeout_ms(&self) -> Result<Option<u32>>

Gets the value of the SO_RCVTIMEO option for this socket.

For more information about this option, see set_read_timeout_ms.

fn read_timeout(&self) -> Result<Option<Duration>>

Gets the value of the SO_RCVTIMEO option for this socket.

For more information about this option, see set_read_timeout.

fn set_write_timeout_ms(&self, val: Option<u32>) -> Result<()>

Sets the SO_SNDTIMEO option for this socket.

This option specifies the timeout, in milliseconds, of how long calls to this socket's write function will wait before returning a timeout. A value of None means that no read timeout should be specified and otherwise Some indicates the number of milliseconds for the timeout.

fn set_write_timeout(&self, val: Option<Duration>) -> Result<()>

Sets the SO_SNDTIMEO option for this socket.

This option specifies the timeout of how long calls to this socket's write function will wait before returning a timeout. A value of None means that no read timeout should be specified and otherwise Some indicates the duration of the timeout.

fn write_timeout_ms(&self) -> Result<Option<u32>>

Gets the value of the SO_SNDTIMEO option for this socket.

For more information about this option, see set_write_timeout_ms.

fn write_timeout(&self) -> Result<Option<Duration>>

Gets the value of the SO_SNDTIMEO option for this socket.

For more information about this option, see set_write_timeout.

fn take_error(&self) -> Result<Option<Error>>

Get the value of the SO_ERROR option on this socket.

This will retrieve the stored error in the underlying socket, clearing the field in the process. This can be useful for checking errors between calls.

fn connect<A: ToSocketAddrs>(&self, addr: A) -> Result<()>

Connects this UDP socket to a remote address, allowing the send and recv syscalls to be used to send data and also applies filters to only receive data from the specified address.

fn send(&self, buf: &[u8]) -> Result<usize>

Sends data on the socket to the remote address to which it is connected.

The connect method will connect this socket to a remote address. This method will fail if the socket is not connected.

fn recv(&self, buf: &mut [u8]) -> Result<usize>

Receives data on the socket from the remote address to which it is connected.

The connect method will connect this socket to a remote address. This method will fail if the socket is not connected.

fn set_nonblocking(&self, nonblocking: bool) -> Result<()>

Moves this UDP socket into or out of nonblocking mode.

For more information about this option, see TcpStreamExt::set_nonblocking.

Implementations on Foreign Types

impl UdpSocketExt for UdpSocket

fn set_recv_buffer_size(&self, size: usize) -> Result<()>

fn recv_buffer_size(&self) -> Result<usize>

fn set_send_buffer_size(&self, size: usize) -> Result<()>

fn send_buffer_size(&self) -> Result<usize>

fn set_broadcast(&self, broadcast: bool) -> Result<()>

fn broadcast(&self) -> Result<bool>

fn set_multicast_loop_v4(&self, multicast_loop_v4: bool) -> Result<()>

fn multicast_loop_v4(&self) -> Result<bool>

fn set_multicast_ttl_v4(&self, multicast_ttl_v4: u32) -> Result<()>

fn multicast_ttl_v4(&self) -> Result<u32>

fn set_multicast_hops_v6(&self, _hops: u32) -> Result<()>

fn multicast_hops_v6(&self) -> Result<u32>

fn set_multicast_loop_v6(&self, multicast_loop_v6: bool) -> Result<()>

fn multicast_loop_v6(&self) -> Result<bool>

fn set_multicast_if_v4(&self, _interface: &Ipv4Addr) -> Result<()>

fn multicast_if_v4(&self) -> Result<Ipv4Addr>

fn set_multicast_if_v6(&self, _interface: u32) -> Result<()>

fn multicast_if_v6(&self) -> Result<u32>

fn set_ttl(&self, ttl: u32) -> Result<()>

fn ttl(&self) -> Result<u32>

fn set_unicast_hops_v6(&self, _ttl: u32) -> Result<()>

fn unicast_hops_v6(&self) -> Result<u32>

fn set_only_v6(&self, only_v6: bool) -> Result<()>

fn only_v6(&self) -> Result<bool>

fn join_multicast_v4(
    &self,
    multiaddr: &Ipv4Addr,
    interface: &Ipv4Addr
) -> Result<()>

fn join_multicast_v6(&self, multiaddr: &Ipv6Addr, interface: u32) -> Result<()>

fn leave_multicast_v4(
    &self,
    multiaddr: &Ipv4Addr,
    interface: &Ipv4Addr
) -> Result<()>

fn leave_multicast_v6(&self, multiaddr: &Ipv6Addr, interface: u32) -> Result<()>

fn set_read_timeout_ms(&self, dur: Option<u32>) -> Result<()>

fn read_timeout_ms(&self) -> Result<Option<u32>>

fn set_write_timeout_ms(&self, dur: Option<u32>) -> Result<()>

fn write_timeout_ms(&self) -> Result<Option<u32>>

fn set_read_timeout(&self, dur: Option<Duration>) -> Result<()>

fn read_timeout(&self) -> Result<Option<Duration>>

fn set_write_timeout(&self, dur: Option<Duration>) -> Result<()>

fn write_timeout(&self) -> Result<Option<Duration>>

fn take_error(&self) -> Result<Option<Error>>

fn connect<A: ToSocketAddrs>(&self, addr: A) -> Result<()>

fn send(&self, buf: &[u8]) -> Result<usize>

fn recv(&self, buf: &mut [u8]) -> Result<usize>

fn set_nonblocking(&self, nonblocking: bool) -> Result<()>

Implementors