62 lines
2.7 KiB
Markdown
62 lines
2.7 KiB
Markdown
`sparsemap` is a sparse, compressed bitmap. In best case, it can store 2048
|
|
bits in just 8 bytes. In worst case, it stores the 2048 bits uncompressed and
|
|
requires additional 8 bytes of overhead.
|
|
|
|
The "best" case happens when large consecutive sequences of the bits are
|
|
either set ("1") or not set ("0"). If your numbers are consecutive 64bit
|
|
integers then sparsemap can compress up to 16kb in just 8 bytes.
|
|
|
|
## How does it work?
|
|
|
|
On the lowest level stores bits in sm_bitvec_t's (a uint32_t or uint64_t).
|
|
|
|
Each sm_bitvec_t has an additional descriptor (2 bits). A single word prepended
|
|
to each sm_bitvec_t describes its condition. The descriptor word and the
|
|
sm_bitvec_t's have the same size.) The descriptor of a sm_bitvec_t
|
|
specifies whether the sm_bitvec_t consists only of set bits ("1"), unset
|
|
bits ("0") or has a mixed payload. In the first and second case the
|
|
sm_bitvec_t is not stored.
|
|
|
|
An example shows a sequence of 4 x 16 bits (here, each sm_bitvec_t and the
|
|
Descriptor word has 16 bits):
|
|
|
|
Descriptor:
|
|
00 00 00 00 11 00 11 10
|
|
^^ ^^ ^^ ^^-- sm_bitvec_t #0 - #3 are "0000000000000000"
|
|
^^-- sm_bitvec_t #4 is "1111111111111111"
|
|
^^-- sm_bitvec_t #5 is "0000000000000000"
|
|
^^-- sm_bitvec_t #7 is "1111111111111111"
|
|
^^-- sm_bitvec_t #7 is "0110010101111001"
|
|
|
|
Since the first 7 sm_bitvec_t's are either all "1" or "0" they are not stored.
|
|
The actual memory sequence looks like this:
|
|
|
|
0000000011001110 0110010101111001
|
|
|
|
Instead of storing 8 Words (16 bytes), we only store 2 Words (2 bytes): one
|
|
for the descriptor, one for last sm_bitvec_t #7.
|
|
|
|
The sparsemap stores a list of chunk maps, and for each chunk map it stores the
|
|
absolute address (i.e. if the user sets bit 0 and bit 10000, and the chunk map
|
|
capacity is 2048, the sparsemap creates two chunk maps; the first starts at
|
|
offset 0, the second starts at offset 8192).
|
|
|
|
# Usage instructions
|
|
|
|
The file `examples/ex_1.c` has example code.
|
|
|
|
## Final words
|
|
|
|
This bitmap has efficient compression when used on long sequences of set (or
|
|
unset) bits (i.e. with a word size of 64bit, and a payload of consecutive
|
|
numbers without gaps, the payload of 2048 x sizeof(uint64_t) = 16kb will occupy
|
|
only 8 bytes!
|
|
|
|
However, if the sequence is not consecutive and has gaps, it's possible that
|
|
the compression is inefficient, and the size (in the worst case) is identical
|
|
to an uncompressed bit vector (sometimes higher due to the bytes required for
|
|
metadata). In such cases, other compression schemes are more efficient (i.e.
|
|
http://lemire.me/blog/archives/2008/08/20/the-mythical-bitmap-index/).
|
|
|
|
This library was originally created for hamsterdb [http://hamsterdb.com] in
|
|
C++ and then translated to C99 code by Greg Burd <greg@burd.me>.
|