Commit graph

114 commits

Author SHA1 Message Date
Russ Cox
c9ee77b8a2 formatting tweaks 2009-09-03 00:46:15 -07:00
Russ Cox
d26025d124 can set just %gs now. 2009-09-02 10:09:34 -07:00
Russ Cox
7e0cc8e36e another attempt at cpu-local variables.
this time do it ourselves instead of piggybacking on TLS.
add -fno-pic to Makefile; pic code breaks our fake TLS.
2009-09-02 10:07:59 -07:00
Russ Cox
f8ab2079cd fix TLS again;
still not quite but a lot better.
2009-09-02 07:59:24 -07:00
Russ Cox
57ae146362 Fix TLS for PIC systems 2009-09-02 07:41:08 -07:00
Russ Cox
48755214c9 assorted fixes:
* rename c/cp to cpu/proc
 * rename cpu.context to cpu.scheduler
 * fix some comments
 * formatting for printout
2009-08-30 23:02:08 -07:00
Russ Cox
0aef891495 shuffle and tweak for formatting.
pdf has very good page breaks now.
would be a good copy for fall 2009.
2009-08-08 01:07:30 -07:00
Russ Cox
00e571155c more doc tweaks 2009-07-12 18:33:37 -07:00
Russ Cox
2c5f7aba38 initproc, usegment, swtch tweaks 2009-07-11 19:28:29 -07:00
rsc
27ff8f0e6f compile fixes 2009-05-31 05:13:51 +00:00
rsc
34295f461a group locks into structs they protect.
few naming nits.
2009-05-31 05:12:21 +00:00
rsc
7b644318dd clean up %fs %gs use 2009-05-31 01:12:08 +00:00
rsc
215738336a move fork into proc.c 2009-05-31 00:38:51 +00:00
rsc
19333efb9e Some proc cleanup, moving some of copyproc into allocproc.
Also, an experiment: use "thread-local" storage for c and cp
instead of the #define macro for curproc[cpu()].
2009-05-31 00:28:45 +00:00
rsc
2157576107 be consistent: no underscores in function names 2009-03-08 22:07:13 +00:00
kolya
c100d9ee2d cleaner swtch.S 2008-10-15 05:14:10 +00:00
kolya
228e500a0c save cpus.intena in sched(), so we get the right EFLAGS.IF value once a
timer-preempted kernel thread resumes execution in trap() after yield().
otherwise the kernel could get an arbitrary number of nested timer intrs.
2008-10-15 05:01:39 +00:00
rtm
4651d04ad1 omit *.d from tar file 2008-09-11 10:20:40 +00:00
rtm
ee3f75f229 simplify growproc 2008-08-28 17:57:47 +00:00
rtm
98754d687e avoid a bug w/ exit() 2008-08-28 00:53:24 +00:00
rtm
fd6b029401 proc_wait -> wait 2007-10-20 18:25:38 +00:00
rsc
ab08960f64 Final word on the locking fiasco?
Change pushcli / popcli so that they can never turn on
interrupts unexpectedly.  That is, if interrupts are on,
then pushcli(); popcli(); turns them off and back on, but
if they are off to begin with, then pushcli(); popcli(); is
a no-op.

I think our fundamental mistake was having a primitive
(release and then popcli nee spllo) that could turn
interrupts on at unexpected moments instead of being
explicit about when we want to start allowing interrupts.

With the new semantics, all the manual fiddling of ncli
to force interrupts off in certain sections goes away.
In return, we must explicitly mark the places where
we want to enable interrupts unconditionally, by calling sti().
There is only one: inside the scheduler loop.
2007-09-27 21:25:37 +00:00
rsc
c95bde8163 yank out stack overflow checking ugliness 2007-09-27 20:38:53 +00:00
rsc
4f74de0edc okay, that was long enough - revert 2007-09-27 20:32:45 +00:00
rsc
ce2e751555 test: store curproc at top of stack
I don't actually think this is worthwhile, but I figured
I would check it in before reverting it, so that it can
be in the revision history.

Pros:
  * curproc doesn't need to turn on/off interrupts
  * scheduler doesn't have to edit curproc anymore

Cons:
  * it's ugly
  * all the stack computation is more complicated.
  * it doesn't actually simplify anything but curproc,
    and even curproc is harder to follow.
2007-09-27 20:29:50 +00:00
rsc
3807c1f20b rename splhi/spllo to pushcli/popcli 2007-09-27 20:09:40 +00:00
rsc
39c3fb1b15 overkill: use segments to catch stack overflow (delete before next year) 2007-09-27 19:39:10 +00:00
rsc
c8919e6537 kernel SMP interruptibility fixes.
Last year, right before I sent xv6 to the printer, I changed the
SETGATE calls so that interrupts would be disabled on entry to
interrupt handlers, and I added the nlock++ / nlock-- in trap()
so that interrupts would stay disabled while the hw handlers
(but not the syscall handler) did their work.  I did this because
the kernel was otherwise causing Bochs to triple-fault in SMP
mode, and time was short.

Robert observed yesterday that something was keeping the SMP
preemption user test from working.  It turned out that when I
simplified the lapic code I swapped the order of two register
writes that I didn't realize were order dependent.  I fixed that
and then since I had everything paged in kept going and tried
to figure out why you can't leave interrupts on during interrupt
handlers.  There are a few issues.

First, there must be some way to keep interrupts from "stacking
up" and overflowing the stack.  Keeping interrupts off the whole
time solves this problem -- even if the clock tick handler runs
long enough that the next clock tick is waiting when it finishes,
keeping interrupts off means that the handler runs all the way
through the "iret" before the next handler begins.  This is not
really a problem unless you are putting too many prints in trap
-- if the OS is doing its job right, the handlers should run
quickly and not stack up.

Second, if xv6 had page faults, then it would be important to
keep interrupts disabled between the start of the interrupt and
the time that cr2 was read, to avoid a scenario like:

   p1 page faults [cr2 set to faulting address]
   p1 starts executing trapasm.S
   clock interrupt, p1 preempted, p2 starts executing
   p2 page faults [cr2 set to another faulting address]
   p2 starts, finishes fault handler
   p1 rescheduled, reads cr2, sees wrong fault address

Alternately p1 could be rescheduled on the other cpu, in which
case it would still see the wrong cr2.  That said, I think cr2
is the only interrupt state that isn't pushed onto the interrupt
stack atomically at fault time, and xv6 doesn't care.  (This isn't
entirely hypothetical -- I debugged this problem on Plan 9.)

Third, and this is the big one, it is not safe to call cpu()
unless interrupts are disabled.  If interrupts are enabled then
there is no guarantee that, between the time cpu() looks up the
cpu id and the time that it the result gets used, the process
has not been rescheduled to the other cpu.  For example, the
very commonly-used expression curproc[cpu()] (aka the macro cp)
can end up referring to the wrong proc: the code stores the
result of cpu() in %eax, gets rescheduled to the other cpu at
just the wrong instant, and then reads curproc[%eax].

We use curproc[cpu()] to get the current process a LOT.  In that
particular case, if we arranged for the current curproc entry
to be addressed by %fs:0 and just use a different %fs on each
CPU, then we could safely get at curproc even with interrupts
disabled, since the read of %fs would be atomic with the read
of %fs:0.  Alternately, we could have a curproc() function that
disables interrupts while computing curproc[cpu()].  I've done
that last one.

Even in the current kernel, with interrupts off on entry to trap,
interrupts are enabled inside release if there are no locks held.
Also, the scheduler's idle loop must be interruptible at times
so that the clock and disk interrupts (which might make processes
runnable) can be handled.

In addition to the rampant use of curproc[cpu()], this little
snippet from acquire is wrong on smp:

  if(cpus[cpu()].nlock == 0)
    cli();
  cpus[cpu()].nlock++;

because if interrupts are off then we might call cpu(), get
rescheduled to a different cpu, look at cpus[oldcpu].nlock, and
wrongly decide not to disable interrupts on the new cpu.  The
fix is to always call cli().  But this is wrong too:

  if(holding(lock))
    panic("acquire");
  cli();
  cpus[cpu()].nlock++;

because holding looks at cpu().  The fix is:

  cli();
  if(holding(lock))
    panic("acquire");
  cpus[cpu()].nlock++;

I've done that, and I changed cpu() to complain the first time
it gets called with interrupts disabled.  (It gets called too
much to complain every time.)

I added new functions splhi and spllo that are like acquire and
release but without the locking:

  void
  splhi(void)
  {
    cli();
    cpus[cpu()].nsplhi++;
  }

  void
  spllo(void)
  {
    if(--cpus[cpu()].nsplhi == 0)
      sti();
  }

and I've used those to protect other sections of code that refer
to cpu() when interrupts would otherwise be disabled (basically
just curproc and setupsegs).  I also use them in acquire/release
and got rid of nlock.

I'm not thrilled with the names, but I think the concept -- a
counted cli/sti -- is sound.  Having them also replaces the
nlock++/nlock-- in trap.c and main.c, which is nice.


Final note: it's still not safe to enable interrupts in
the middle of trap() between lapic_eoi and returning
to user space.  I don't understand why, but we get a
fault on pop %es because 0x10 is a bad segment
descriptor (!) and then the fault faults trying to go into
a new interrupt because 0x8 is a bad segment descriptor too!
Triple fault.  I haven't debugged this yet.
2007-09-27 12:58:42 +00:00
rtm
de1329dda2 longjmp -> swtch in comments 2007-08-30 17:39:56 +00:00
rsc
5573c8f296 delete proc_ on proc_exit, proc_wait, proc_kill 2007-08-28 19:14:43 +00:00
rsc
5516be1fed spaces around else for rtm 2007-08-28 18:37:41 +00:00
rsc
e4d6a21165 more consistent spacing 2007-08-28 18:32:08 +00:00
rsc
fc21046754 nit 2007-08-28 12:52:14 +00:00
rsc
818fc0125e replace setjmp/longjmp with swtch 2007-08-28 12:48:33 +00:00
rsc
558ab49f13 delete unnecessary #include lines 2007-08-27 23:26:33 +00:00
rsc
1ccff18b24 fileincref -> filedup (consistent with idup) 2007-08-27 14:35:09 +00:00
rsc
97ac612fb1 nits 2007-08-24 20:28:08 +00:00
rsc
dd86897434 make wakeup1 static 2007-08-24 20:22:55 +00:00
rsc
b1fb19b6df Use parent pointer instead of ppid. 2007-08-23 14:40:30 +00:00
rsc
3a057d12ae avoid hardcoding init as pid 1 proc[0] 2007-08-23 14:35:28 +00:00
rsc
1d7839a1da my mistake found by robert 2007-08-22 17:45:52 +00:00
rsc
eaea18cb9c PDF at http://am.lcs.mit.edu/~rsc/xv6.pdf
Various changes made while offline.

 + bwrite sector argument is redundant; use b->sector.
 + reformatting of files for nicer PDF page breaks
 + distinguish between locked, unlocked inodes in type signatures
 + change FD_FILE to FD_INODE
 + move userinit (nee proc0init) to proc.c
 + move ROOTDEV to param.h
 + always parenthesize sizeof argument
2007-08-22 06:01:32 +00:00
rsc
f32f3638f4 Various cleanup:
- Got rid of dummy proc[0].  Now proc[0] is init.
 - Added initcode.S to exec /init, so that /init is
   just a regular binary.
 - Moved exec out of sysfile to exec.c
 - Moved code dealing with fs guts (like struct inode)
   from sysfile.c to fs.c.  Code dealing with system call
   arguments stays in sysfile.c
 - Refactored directory routines in fs.c; should be simpler.
 - Changed iget to return *unlocked* inode structure.
   This solves the lookup-then-use race in namei
   without introducing deadlocks.
   It also enabled getting rid of the dummy proc[0].
2007-08-21 19:22:08 +00:00
rsc
e2a620da49 checkpoint - simpler namei interface 2007-08-20 19:37:15 +00:00
rsc
07ddc0fa82 nit 2007-08-14 19:41:29 +00:00
rsc
2ef3a64bb4 Because limit gives the address of the last addressable
byte in the segment, the limit argument to SEG16 and SEG
needs to have 1 subtracted from it.
2007-08-14 04:55:45 +00:00
rsc
b6095304b7 Make cp a magic symbol. 2007-08-10 16:37:27 +00:00
rsc
9583b476bf try to use cp only for curproc[cpu()] 2007-08-09 17:32:40 +00:00
rsc
f2f062da61 check p->killed for long-lived sleeps 2007-08-08 10:29:42 +00:00
rsc
c16e0916a7 cleaner table 2007-08-08 09:43:07 +00:00